Venetian blinds

Mounting options for the venetian blinds: in the glazing bead recess, on the window frame or without drilling using clamp brackets only. These are simply clamped onto the window sash (top and bottom), for example on PVC windows. Max. width 200 cm x 240 cm height. With lateral tensioning by means of steel cables, recommended as a tilt safeguard on tilt windows or doors. Here is our DESSINISO venetian blind with the details: aluminium horizontal venetian blinds with 16 or 25 mm aluminium slats, head rail 25 x 25 mm (also 25 x 25 mm with endless chain gear) Slat colours as selected, head rail and bottom rail coated in a matching colour. Standard operation with cord pull and tilt wand, endless chain operation available at extra cost Standard brackets for wall or ceiling mounting are always included, clamp brackets (see image) at extra cost. Measuring instructions: (for glazing bead recess mounting = minimum recess depth 17 mm) Measure the height of the glazing bead recess without deduction = order height - measure the smallest width of the glazing bead recess from inner edge to inner edge, minus 4 mm (smallest width = in front of the seal = material dimension of the glazing bead recess at its narrowest point), disregard the rubber seal) This measuring method corresponds to mounting in the glazing bead recess. with clamp brackets or with angle brackets on the frame (centre and right images) alternative measurement: - measure the glass dimension plus an overlap of approx. 1 cm on the right and left in width. Measure from the top edge of the sash to the bottom edge of the sash for the order height. The venetian blind is mounted on the sash using clamp brackets or angle brackets. This measuring method therefore corresponds to clamp bracket mounting without drilling or frame mounting with angle brackets. Aluminium venetian blinds for indoor use can be made with different slat widths. You can configure and order these venetian blinds in our shop at a low price.

High-quality made-to-measure bamboo blinds can be ordered here at a low price. These bamboo blinds are a novelty on the sun protection market and offer great scope for an unusual and modern addition to interior design. Bamboo has excellent material properties and is therefore very well suited to the production of furniture, flooring and venetian blinds. The trend towards natural materials is becoming ever more popular, not only as an integral part of home design but also as a flexible addition to home and office design. Bamboo is ideally suited to this. The high silica content makes the bamboo slat both flexible and extremely hard. The four-coat rolled lacquer finish with double end treatment including UV filter ensures lasting colour fastness. These venetian blinds are suitable for damp rooms. Delivery time approx. 2 weeks. The bamboo venetian blind is offered as standard as follows: - Made to measure up to 180 cm width and 240 cm height - Top cover straight or closed as a U-profile - Versions for window frame mounting with lateral tensioning available at extra cost - Ladder cords to match the wood Raised by cord pull with bamboo tassels, tilted with a matching bamboo wand Fascia shape of your choice: - straight fascia = 7 mm larger than the blind dimension - or angled fascia, which also covers the head rail at the sides = 30 mm wider than the blind dimension. Thanks to the thin slats, the stack heights are also very small compared with standard wooden venetian blinds. - up to 080 cm blind height = 12.0 cm stack height - up to 100 cm blind height = 14.0 cm stack height - up to 140 cm blind height = 18.0 cm stack height - up to 200 cm blind height = 23.0 cm stack height - up to 220 cm blind height = 24.0 cm stack height The colour overview is also available in the configurator: Order these high-quality bamboo blinds with 25 mm slats at a low online price in our shop and configure them made to measure to your requirements.

Blackout external venetian blinds, fitted with 90 mm wide S or Z slats, for darkening with guide rails or cable guidance – order in our shop. As early as 30 years ago it was recognised that external venetian blinds can achieve a high blackout effect thanks to a special curvature of the slats, if they are shaped differently from a C-slat. The oldest blackout external venetian blinds are probably the Z-slats, which have a somewhat industrial, angular look. The S-slats are more harmonious and blend in more softly with the façade. Very high heat and light shielding. Properties of S and Z slats as blackout slats: good darkening in the slat area good prices, made in the EU high wind stability thanks to the special curvature Somfy drives for motorised versions crank operation available angled pelmets available large choice of colours reasonable delivery times good workmanship and quality thanks to fully automated production no shipping abroad (German addresses only) These colours are available. The spacers for the guide rails. All stack heights for all 4 slat types. Height = overall blind height including head rail. Blind height for 90 mm S-slats and 90 mm Z-slats with crank operation 60 cm                      135 mm stack      135 mm stack             80 cm                      145 mm                          145 mm 100 cm                    155 mm                          160 mm 120 cm                    170 mm                          170 mm 140 cm                    175 mm                          180 mm 160 cm                    190 mm                          190 mm 180 cm                    200 mm                          205 mm 200 cm                    215 mm                          215 mm 220 cm                    220 mm                          225 mm 240 cm                    235 mm                          235 mm 260 cm                    245 mm                          250 mm 280 cm                    255 mm                          260 mm 300 cm                    265 mm                          270 mm 320 cm                    275 mm                          280 mm 340 cm                    290 mm                          295 mm 360 cm                    300 mm                          305 mm 380 cm                    305 mm                          315 mm For motorised blinds the stack is 20 mm higher. Example calculation: Cover plate height: e.g. for 90 mm S-slats, external venetian blind height with motor = 220 cm = 220 mm plus 20 mm for the motor plus 20 mm recommended overlap = cover plate height 260 mm.

Sloping venetian blinds for interiors – an easy way to shade sloping windows with horizontal blinds. As a sloping system (Slope), this horizontal blind can also be used on larger glazed areas. (Slat material is aluminium) At last, incoming light and heat can be controlled properly here too. Head rail 25 x 25 mm. Raising the blind is only possible to a limited extent (see side guide***). The following shapes are currently available (plus mirrored shapes). See configuration! - the pictures / sketches only illustrate the shapes and do not show technical details - the short width at the TOP of types B and C must not be less than 20 cm Slat width 25 mm. Free-hanging version. Lateral tensioning with a plastic cord on the left and right is available at a surcharge. Operating rod length can be chosen freely. Operation as standard by cord pull to raise the blind and by tilt wand to turn the slats. Available colours below: For more colours, see the selection box in the configuration. Summary: We only offer sloping venetian blinds for interiors with aluminium slats. The very slim design allows flexible installation. Configure your new Slope sloping blind for sun protection, privacy and heat protection in our shop and order with free shipping.

These economical ECOsaver external venetian blinds are available with 80 mm beaded slats or 80 mm flat slats. As well as C slats, Z slats and S slats are available on request. Buy online from a wide range. Anyone building a house and looking for external venetian blinds keeps wondering how the enormous price differences come about. Besides brand-related pricing, production location has for some time played a central role in the pricing of external venetian blinds. The same situation has existed for years with roller doors and roller shutters and makes it impossible for consumers to understand the huge price differences. To meet demand, we now also offer economical alternatives of this kind: quality from the Czech Republic. How to measure and order The order sizes of external venetian blinds are always finished sizes of the entire construction. For the width, this means outer edge of guide rail (with rail guide) or outer edge of slat (with cable guide). For the height, the order size is top edge of head rail to bottom edge of bottom rail = order height. For recess fitting, measure the recess and deduct 1–2 cm if you want to screw the blind to the window frame using spacers. If you want to fix the rails directly to the side of the reveal, first check carefully that the measurements at the top, middle and bottom are the same. The narrowest recess measurement is then the order width. For fitting in front of the reveal, please add the side overlaps (5–8 cm recommended). For the height, the stack height must be added. Below are the stack heights with motor drive and 80 mm beaded slats: Stack heights with crank operation are 20 mm smaller. Smallest stack heights possible with the 80 mm flat slat and cable guide: up to 100 cm blind height = 145 mm stack height up to 120 cm blind height = 150 mm up to 140 cm blind height = 155 mm up to 160 cm blind height = 160 mm up to 180 cm blind height = 165 mm up to 200 cm blind height = 170 mm up to 220 cm blind height = 175 mm up to 240 cm blind height = 180 mm up to 260 cm blind height = 185 mm up to 280 cm blind height = 190 mm up to 300 cm blind height = 195 mm up to 320 cm blind height = 200 mm up to 340 cm blind height = 205 mm up to 360 cm blind height = 210 mm up to 380 cm blind height = 215 mm up to 400 cm blind height = 220 mm Stack heights with crank operation are 20 mm smaller. Cover panels are made 25 mm higher than the stack height as standard. Summary of ECOsaver external venetian blind specification: - 80 mm beaded slats or flat slats - max. 400 cm wide x 400 cm high - crank as standard operation, motor at extra cost (SOMFY) - head rail in galvanised sheet steel - bottom rail anodised, other colours at no extra charge - anodised guide rails, other colours at no extra charge - many slat colours (see configurator) - rail guide or cable guide - cannot be delivered to Switzerland Slat colour choice: Delivery to German addresses only. To black out a window with blackout slats, choose blackout external venetian blinds.

You can order interior venetian blinds with 35 mm or 50 mm slats for shading large widths online from us. Use our venetian blind configurator. Delivery to Switzerland and Austria is also available. Features: Head and bottom rails only available in white or silver. With Reflexa, any colour can be chosen free of charge. Ladder cords to match the slat colour; tapes available in white, silver or black Standard wall/ceiling brackets are included. Head rail used: Cord and crank operation with 35 / 50 mm aluminium slats = head rail 40 x 40 mm. Same 40 mm x 40 mm high head rail with continuous cord and 50 mm slats. With motor drive generally = head rail 57 mm x 51 mm. Maximum width 380 cm x 280 cm height.

Isodesign® – the glazing-rebate venetian blind – order in our shop and buy from Sonnenschutzshop24.de. The new Isodesign® glazing-rebate venetian blinds with side tensioning. An Austrian invention, designed specifically for windows and doors without glazing bars. Quick, clean fitting like no other system. Operated by a continuous chain. Side tensioning by nylon cord. The new hinged design was developed to make cleaning the blind and the window easier. Unique safety connector on the ball chain. Even slimmer headrail cover, chain clip in a well-designed finish. The ultra-slim headrail almost disappears into the glazing rebate. When the cover is folded open, the fixing holes are visible. Once fitted, the cover simply clips on. Raising, lowering and tilting the slats is all done with the continuous ball chain. This is built into the side of the headrail and, when not in use, is clipped into a small, neat holder. Even with the window tilted open, the blind stays flat in the rebate, with no rods or cords hanging loose. This interior horizontal venetian blind is particularly suitable for conservatories. Fitting is simple and is done directly in the window recess or glazing rebate. The advantage is obvious: the sun's rays, and with them the heat, are reflected straight back outside. The headrail is integrated into the frame, screws on the right and 2 screws on the left. Done! Please note: the glazing rebate must be at least 18 mm deep. If it is less, please also order spacer plates (surcharge). Applications and uses of the Isodesign venetian blind: - in conservatories - in offices - windows with glazing rebate or without glazing bars Reflection is greatest in the pure white version. The following colours are available. Headrail and bottom rail available in white - silver - ochre - brown. For additional slat colours, see the selection. The slat material is aluminium. - also available in grey similar to RAL 7038 Please note that no exactly matching headrails and bottom rails are available for these slat colours. Combinations are possible, e.g. brown headrail, light beige slats etc. i Side tensioning with transparent cord on the left and right is included. Supplied with fixing screws. Please state the window type (timber or PVC) when ordering All prices are for venetian blinds with 25 mm slats. Surcharges: spacer plates: EUR 2 per blind Operating chain length for windows = blind height minus 10 cm Operating chain length for doors = as required The operating side is the side opposite the window handle You only need a 2.5 mm drill bit to pre-drill the holes and for the side tensioning brackets. Fitting is possible in 90-degree glazing rebates as well as sloping glazing rebates. * The glazing rebate width (clear sash dimension) is the smallest visible glass dimension between the frames, into which the blind will be fitted and in which the slats must be able to tilt (picture 5). Summary: The Isodesign venetian blind is an innovative sun protection product that fits neatly into the glazing rebate. The slim headrail does not protrude and blends into the geometry of the glazing beads. In short, an exceptional glazing-bead venetian blind for effective heat protection on windows and conservatories. You can configure and order this product online. We deliver throughout Europe and to Switzerland.

Exclusive made-to-measure bamboo venetian blinds with 50 mm wide slats – order from Sonnenschutzshop24.de. Configure bamboo venetian blinds with 50 mm slats for large widths in our shop and order them made to measure. These blinds can be used in many sun protection applications and are an unusual, modern addition to window shading. Bamboo has excellent material properties, which is why it works very well for furniture, flooring and venetian blinds. Natural materials are becoming ever more popular, not only as a fixed part of interior design but also as a flexible addition to home and office furnishings. Bamboo is ideally suited to this. Its high silica content makes the bamboo slat both flexible and extremely hard. The four-times roller-applied lacquer with double end treatment including a UV filter ensures lasting colour fastness. Shown here with 50 mm slats; the pelmet overhang is approx. 3 cm. The bamboo slat used in production is thinner than the material used for conventional wooden venetian blinds – it is very light and remarkably flexible, yet hard and durable. On top of this, the blind has a small stack height when raised. Stack heights with 50 mm slats --------------------------------------------------------- Overall heights - 100 cm = 13 cm stack height (all figures may vary slightly) - 140 cm = 18 cm - 200 cm = 19.0 cm - 240 cm = 23.0 cm --------------------------------------------------------- The slat is made as a laminated profile, so bamboo venetian blinds are extremely dimensionally stable – the slats neither twist nor bend. These properties, together with its resistance to moisture and water, make bamboo an ideal material for ventilated rooms with changing temperatures and humidity, such as bathrooms, WCs or conservatories. We only offer these blinds with cord operation or, for a surcharge, with a motor, so no unnecessary cords are visible. This underlines the exclusive character of the product. At no extra cost, these blinds can also be supplied with side guidance using nylon cord. Anti-swing guidance is needed when fitting on tilt windows, doors or similar. Please note the side overhangs of the cover on the head rail of the blind. These are approx. 3 cm. Universal brackets are included. The colours available: (also shown in the configurator) Order your new made-to-measure bamboo venetian blinds with motor or cord operation in our shop. The configurator shows you the price for these high-quality blinds. We also deliver to Switzerland and Austria.

Panel blinds on a decorative pole track With Creativ Plus, the smooth fabric panels run on a pole track with 2 to 4 runners. The track is available in white, matt chrome or stainless-steel colour, so it can stay on show. You move the panels by hand or with a draw rod. It is fitted with wall brackets (for 2 or 3 runners) or ceiling brackets (for 2 to 4 runners). Brackets and fixing materials are included. You measure the width of the track and the height to just above the floor. Size: 60 to 590 cm wide, 40 to 300 cm high (finished size); each panel 30 to 120 cm Track: pole track with 2 to 4 runners in white, matt chrome or stainless-steel colour Operation: by hand or with a draw rod Fitting: wall brackets (2 or 3 runners) or ceiling brackets (2 to 4 runners) Fabrics: 108 erfal panel blind fabrics

Objecta panel blinds for large window fronts and commercial spaces Objecta is a panel blind system for large window fronts and commercial interiors. The aluminium track has 2 to 6 runners and comes in white or anodised silver. You move the panels with a cord, a draw rod or freely by hand. Panel carriers are available with a keder or hook-and-loop profile, with or without weighting. The system is fitted to the ceiling with retaining clips or double ceiling brackets, which are included. For wall fitting, wall brackets are available on request – please state this under “Special requests”. Size: 60 to 590 cm wide, 40 to 300 cm high (finished size) Panel width: 30 to 140 cm, freely sliding panels up to 100 cm Track: aluminium with 2 to 6 runners, white or anodised silver Operation: cord, draw rod or free sliding Fabrics: 108 erfal panel blind fabrics

Panel blinds – smooth fabric panels instead of folds A panel blind is made of smooth fabric panels that slide sideways in a track. It suits large windows and patio doors and can also be used as a room divider. You can have 2 to 5 panels, each on its own runner. You move the panels individually by hand or together with a cord. At the bottom they have either a weight profile or a visible design profile. Panel width follows from the overall width and the number of panels, with a 5 cm overlap (10 cm from 250 cm height); for wide windows, simply choose more panels. The system is fitted to the ceiling, with wall brackets available on request. Size: 60 to 590 cm wide, 40 to 300 cm high (finished size); each panel 30 to 120 cm wide Panels: 2 to 5, each on its own runner Operation: by hand or with a cord Fitting: ceiling with ceiling clamps, wall with wall brackets on request Track and profiles: white (RAL 9016) or anodised silver; fabrics: 108

Order external venetian blinds with 50 mm aluminium slats here – small stack heights, a wide range of uses and many drive options. High-quality Reflexa® external venetian blinds with 50 mm aluminium slats, crank or motor operation, made in Germany and of the latest generation (180 degree tilt). At the bottom of this page (below the colours) you will find detailed technical descriptions and PDFs to print out. Prices for external venetian blinds with 50 mm slats are slightly lower than for the wider, flanged slats. Order in our shop and configure your new external venetian blind. The picture above shows the Reflexa® EMA 50 endless cord blind, which carries out all functions – tilting the slats as well as raising and lowering the blind. During installation the cord is led through the window frame (drill a hole through the frame or wall beforehand) and operated via a deflection pulley (included in the delivery). For endless cord gears and crank drives we always make the gear flush with the head rail. The pictures show the gear protruding. Changing from "flush" to "protruding" is easy during installation. Reflexa® endless cord operation is the best-selling version for 50 mm slats. Endless cord gears are an economical version of the external venetian blind. - 50 mm external venetian blinds are available with endless cord gear, crank drive, motor drive or radio-controlled motor; the manufacturer is always Reflexa. Reflexa® motor operation Crank operation We offer 50 mm slats up to a width of 500 cm (cord pull up to 300 cm width, endless cord gear up to 250 cm, crank and motor up to 500 cm width) and a maximum height of 360 cm. For larger blind sizes, please choose the 60, 80 or 88 mm slats, which are flanged at the sides. For protection against wind and weather, the 50 mm blinds can be made with lateral tensioning using a nylon-coated steel wire. For widths over 200 cm we recommend an additional central guide wire (wind protection). To cover the head rail and the slat stack when the blind is raised, an angle cover plate in a matching RAL colour can be fitted on top. The endless cord gear is durable and maintenance-free. Ladder tapes made of 100% Terylene. Head rail always in natural silver, 57 x 51 mm or 40 x 30 mm depending on the drive type. Bottom rail 51 x 20 mm, coated in a colour of your choice. Please note*: with small widths, the blind may hang slightly askew; this cannot be avoided. Please note: all order sizes are finished sizes of the blind, i.e. outer edge of slat to outer edge of slat = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind. Wall fitting, so that the raised slat stack is out of the window's field of view. Side caps are required for the cover plate, see configuration. Order height (outside) = window opening height plus stack height plus 3 cm = order height of the external venetian blind Fitting options: ceiling, wall, recess Please note that only our measuring guide is binding for you. Any different measuring guides from manufacturers are not valid. We have written ours to be as easy as possible for a non-specialist to follow. If you have any questions, please call our telephone hotline. The following slat colours are available. Other slat colours can be supplied on request at no extra charge – just ask. Head rail always in silver. The bottom rail and tensioning brackets of the blind are silver, dark grey or white as standard. All other colours are available at a surcharge, see configurator. We are happy to send you the stack heights and specifications of the individual slat types on request.

Self-supporting sloping external venetian blinds are particularly suitable for fitting to glass façades and low-energy houses. Sophisticated shading for special fitting situations. This type of shading is needed where the building does not allow fitting directly to the façade or window frame. The complete construction consists of the sloping external venetian blind, guide rails and pelmet. An electric motor drives the blind and controls the tilting of the slats. The bottom rail is a telescopic rail that automatically shortens and lengthens as the blind moves up and down, depending on the angle required. This blind is only available with guide rails. Double, reinforced guide rail brackets hold the complete system and the factory-fitted U-shaped pelmet. Details and features: fitted with 80 mm nipple-guided flat slats, available in many colours available with an inclination of up to 45 degrees (full list at the end of this page) ELERO 230 V motor as standard radio control possible U-shaped square box pelmet to cover the slat stack included as standard (round version on request) side caps for the pelmet included as standard fully pre-assembled and ready to fit double guide rail brackets in various sizes guide rails, pelmet, bottom rail and spacers available in any colour at no extra cost guide rails available in round or square design guide rails always inside the pelmet Horizontal and vertical sectional drawings are provided below to help you with measuring. If you need technical support, please send us photos at: shop(at)sonnenschutzshop24.eu Please refer to the technical drawings for the measuring guidelines. All available slat colours for the Asyflex 80 NF self-supporting. Stack sizes and pelmet sizes – finished sizes with rail guidance: (parallel to the slope) 80 mm slats up to 120 cm blind height = 16 cm / 19 cm 80 mm slats up to 140 cm blind height = 17 cm / 20 cm 80 mm slats up to 160 cm blind height = 19 cm / 22 cm 80 mm slats up to 180 cm blind height = 20 cm / 23 cm 80 mm slats up to 200 cm blind height = 20 cm / 23 cm 80 mm slats up to 220 cm blind height = 21 cm / 24 cm 80 mm slats up to 240 cm blind height = 23 cm / 26 cm 80 mm slats up to 260 cm blind height = 24 cm / 27 cm 80 mm slats up to 280 cm blind height = 26 cm / 30 cm 80 mm slats up to 300 cm blind height = 27 cm / 30 cm 80 mm slats up to 320 cm blind height = 28 cm / 31 cm 80 mm slats up to 340 cm blind height = 29 cm / 32 cm 80 mm slats up to 360 cm blind height = 31 cm / 34 cm 80 mm slats up to 390 cm blind height = 33 cm / 36 cm Stack sizes and pelmet sizes with stainless steel rod guidance. (parallel to the slope) 80 mm slats up to 120 cm blind height = 15 cm / 18 cm 80 mm slats up to 140 cm blind height = 16 cm / 19 cm 80 mm slats up to 160 cm blind height = 17 cm / 20 cm 80 mm slats up to 180 cm blind height = 18 cm / 21 cm 80 mm slats up to 200 cm blind height = 19 cm / 22 cm 80 mm slats up to 220 cm blind height = 19 cm / 22 cm 80 mm slats up to 240 cm blind height = 20 cm / 23 cm 80 mm slats up to 260 cm blind height = 21 cm / 24 cm 80 mm slats up to 280 cm blind height = 22 cm / 25 cm 80 mm slats up to 300 cm blind height = 23 cm / 26 cm 80 mm slats up to 320 cm blind height = 24 cm / 27 cm 80 mm slats up to 340 cm blind height = 25 cm / 28 cm 80 mm slats up to 360 cm blind height = 26 cm / 29 cm 80 mm slats up to 390 cm blind height = 28 cm / 31 cm Manufacturing limits for sloping external venetian blinds: up to 190 cm width = up to 45 degrees inclination up to 200 cm width = up to 44 degrees inclination up to 210 cm width = up to 41 degrees inclination up to 220 cm width = up to 37 degrees inclination up to 230 cm width = up to 34 degrees inclination up to 240 cm width = up to 30 degrees inclination up to 250 cm width = up to 25 degrees inclination up to 260 cm width = up to 19 degrees inclination up to 270 cm width = up to 12 degrees inclination (only with rail guidance and 80 mm slats)

The Asyflex sloping external venetian blind is the ideal external sun protection and privacy solution for sloping windows and other special shapes. The Reflexa AsyFlex sloping external venetian blind is a versatile slat system. Thanks to a patented telescopic rail, windows and glazed areas with a pitch of up to 45 degrees can be shaded. Sloping external venetian blinds are becoming increasingly popular. Despite their high cost, they are almost indispensable in summer. They can be used in many different situations and you can configure them online with us. Sloping shading can be made as a roller shutter or as a venetian blind. Both systems are always electrically operated. For many years Reflexa® has been a pioneer in developing these complex external shading systems for sloping windows. Use our configurator and you will receive a competitive online price immediately. New: from 04/2026 the Asyflex 80 SMS can be ordered as a quick-fit system. Winner of the 2015 Innovation Award at the R+T trade fair. New: Asyflex with rail guide (nipple guide). The adjustable slat positions of the sloping external venetian blind allow almost unlimited control of incoming light. The adjustable aluminium slats look light and unobtrusive, which also makes them ideal for conservatories and glass extensions. They can be set anywhere from closed through half open to fully open. The AsyFlex sloping blind can also be combined with a matching straight external venetian blind. We are happy to advise you on planning. Design your façade without compromise. The wide choice of colours lets you combine the slats, pelmets and telescopic rails as you wish. Standard rails are T-groove guide rails. Blackout rails S70 are available as an option. Further features of the sloping external venetian blind: The slats are made from a curved special aluminium strip with a lightfast, corrosion-resistant paint finish. Available as an 80 mm flat slat (up to 270 cm width with rail guide). To cover the slat stack when the blind is raised, we can supply an L-shaped or U-shaped cover plate in a matching colour. For fitting in front of the house wall, the cover plate is supplied closed at the sides (with side caps). For fitting in the reveal, a cover plate open at the sides is recommended. Details of the Asyflex blind: the blind is guided at the sides by a stainless steel rod or by 25 x 25 mm side rails (80 mm slats only). Supplied as standard with a high-quality 230 V mains motor. The drive is pre-installed out of sight in the head rail. Delivery within Germany is free of charge, using the manufacturer's own vehicles at no risk to you. We deliver throughout the EU and to Switzerland. The production sizes are derived from these measurements (geometric shape). Deductions are made at the factory. When fitting in front of a reveal opening (on an open house wall), please allow for the necessary overlaps all round and for the stack sizes. All order sizes are finished sizes of the blind. The type of fitting must be selected in the configurator; this determines whether deductions are made or the sizes are taken as finished sizes. If you make your own deductions for fitting in the reveal, please note that this also changes the diagonal of the geometric shape, which in turn changes the heights accordingly. If you make a deduction from the base width, a new geometric shape must therefore be measured vertically upwards, which will not match the net dimensions of the actual reveal. Explanation of a sample external venetian blind and the corresponding stack and pelmet sizes: Stack sizes and pelmet sizes – finished sizes with rail guide: (parallel to the slope) 80 mm slats up to 120 cm blind height = 16 cm / 19 cm 80 mm slats up to 140 cm blind height = 17 cm / 20 cm 80 mm slats up to 160 cm blind height = 19 cm / 22 cm 80 mm slats up to 180 cm blind height = 20 cm / 23 cm 80 mm slats up to 200 cm blind height = 20 cm / 23 cm 80 mm slats up to 220 cm blind height = 21 cm / 24 cm 80 mm slats up to 240 cm blind height = 23 cm / 26 cm 80 mm slats up to 260 cm blind height = 24 cm / 27 cm 80 mm slats up to 280 cm blind height = 26 cm / 30 cm 80 mm slats up to 300 cm blind height = 27 cm / 30 cm 80 mm slats up to 320 cm blind height = 28 cm / 31 cm 80 mm slats up to 340 cm blind height = 29 cm / 32 cm 80 mm slats up to 360 cm blind height = 31 cm / 34 cm 80 mm slats up to 390 cm blind height = 33 cm / 36 cm Stack sizes and pelmet sizes with wire and stainless steel rod guide (parallel to the slope) 80 mm slats up to 120 cm blind height = 15 cm / 18 cm 80 mm slats up to 140 cm blind height = 16 cm / 19 cm 80 mm slats up to 160 cm blind height = 17 cm / 20 cm 80 mm slats up to 180 cm blind height = 18 cm / 21 cm 80 mm slats up to 200 cm blind height = 19 cm / 22 cm 80 mm slats up to 220 cm blind height = 19 cm / 22 cm 80 mm slats up to 240 cm blind height = 20 cm / 23 cm 80 mm slats up to 260 cm blind height = 21 cm / 24 cm 80 mm slats up to 280 cm blind height = 22 cm / 25 cm 80 mm slats up to 300 cm blind height = 23 cm / 26 cm 80 mm slats up to 320 cm blind height = 24 cm / 27 cm 80 mm slats up to 340 cm blind height = 25 cm / 28 cm 80 mm slats up to 360 cm blind height = 26 cm / 29 cm 80 mm slats up to 390 cm blind height = 28 cm / 31 cm Possible sizes of sloping external venetian blinds: up to 1876 mm width = up to 45 degrees pitch up to 1909 mm width = up to 44 degrees pitch up to 2003 mm width = up to 41 degrees pitch up to 2121 mm width = up to 37 degrees pitch up to 2202 mm width = up to 34 degrees pitch up to 2301 mm width = up to 30 degrees pitch up to 2408 mm width = up to 25 degrees pitch up to 2513 mm width = up to 19 degrees pitch up to 2601 mm width = up to 12 degrees pitch up to 2649 mm width = up to 5 degrees pitch New: now also available as the Asyflex 80 SMS sloping external venetian blind, quick-fit system

The new blackout external venetian blinds from Reflexa®, with the 71 mm V-slat as type EL71 N, can be configured made to measure and ordered online in our shop. Thanks to the special curvature of the slats, near blackout can be achieved. Fitted without spacers. The new S-guide rails are used. Soft closing thanks to rubber seals between the slats. All guide rails can be ordered. Standard or S70 blackout rails. (selectable in the configurator) If you have any questions about your planning, we will be happy to help. Shipping and delivery with our own vehicles, on request also to Austria and Switzerland as well as selected EU countries. The new V-slat type EL71 N with rail guidance and almost complete blackout. Max. width 470 cm x 400 cm height. Harmonious appearance thanks to perfect workmanship. Even, neat stacking of the slats. Stack sizes of the complete external venetian blind when fully raised. Measurement basis is top edge of head rail to bottom edge of bottom rail. up to 100 cm total height = 15.1 cm stack up to 120 cm total height = 16.5 cm stack up to 140 cm total height = 17.9 cm stack up to 160 cm total height = 19.7 cm stack up to 180 cm total height = 21.1 cm stack up to 200 cm total height = 22.5 cm stack up to 220 cm total height = 24.3 cm stack up to 240 cm total height = 25.7 cm stack up to 260 cm total height = 27.1 cm stack up to 280 cm total height = 28.9 cm stack up to 300 cm total height = 30.3 cm stack up to 320 cm total height = 31.7 cm stack up to 340 cm total height = 33.5 cm stack up to 360 cm total height = 34.9 cm stack up to 380 cm total height = 36.3 cm stack up to 400 cm total height = 38.1 cm stack Factory pelmet size = plus 2.5 cm added to the height. Fitting options: ceiling, wall, recess For additional blackout of a window with blackout slats, choose our good-value blackout external venetian blind.

Made-to-measure external venetian blinds with crank operation, all made in Germany. Many slat widths and versions available. Maximum size 500 cm wide by 400 cm high. Simply order in our shop. This high-quality design (original Reflexa® external venetian blinds) allows large widths and heights at the same time and is also largely unaffected by wind and storms. (Slat thickness 0.50 mm = more than twice as thick as a standard 50 mm slat.) All mounting brackets, consoles and any stiffening brackets for the cover panels are included free of charge with every delivery. Our external venetian blinds come as standard with a 180-degree tilting mechanism. A 38-degree working position or light-directing technology is available as an option, both controlled via the crank. Good reasons to choose Reflexa external venetian blinds with crank operation: - high-quality, precise workmanship, smallest possible stack heights for all slat types - wide colour range, well-proven system (all beaded slats with deep punching, no PVC eyelet) - 80 mm flat slats also available with rail guide, so the smallest possible stack heights can be achieved - many slat widths to choose from, C 60 mm and C 80 mm available - 60 and 80 mm flat slats available with cable or rail guide - safe delivery by our own factory lorry within Germany, by freight forwarder throughout the EU plus Switzerland - minimum width with cable guide = 33 cm, minimum width with rail guide = 40 cm - Please note*: with small widths, the slat curtain may run slightly out of true; this cannot be avoided. Our Reflexa external venetian blinds are fully pre-assembled at the factory and are therefore easy to fit yourself. Detailed, professional fitting instructions are also included. Should you still have any questions about fitting or before measuring, our hotline will be happy to help. The external venetian blinds are operated by crank, the most economical version. (Crank outlet 45 degrees.) The hexagonal crank rod (wall feed-through) on the joint plate is 30 cm long and is cut to length during fitting. If you need a longer rod, please ask us separately or enter it in the "Special requests" field. Please note: All order sizes are finished sizes of the blind. Outer edge of guide rail to outer edge of guide rail = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind. The guide rails are screwed to the window frame using spacers = fitting in the window reveal. Measuring the order height (external) From the underside of the window opening (also called the reveal or lintel) to the top of the window sill minus 5 millimetres = order height of the external venetian blind Alternative fitting method Measuring the order width (external), when fitted without spacers in the wall opening: - Measure the narrowest dimension from wall to inner wall edge without any deduction = order width of the external venetian blind. Here the guide rails are simply screwed through the guide towards the side wall = fitting in the window reveal. Measuring the order height (external): from the underside of the window opening to the top of the window sill, minus 5 millimetres = order height of the external venetian blind Alternative fitting method. Measuring the order width (external), when fitted with spacers in front of the window opening: - Window opening plus approx. 5 cm overlap on each side = order width of the external venetian blind In this case the blind is fitted on the wall so that the raised slat stack is out of the window's field of view. Side caps for the cover panel are required, see configuration. Measuring the order height (external) - Window opening plus stack height plus 3 cm = order height of the external venetian blind Fitting options: ceiling, wall, recess Crank gear with 45-degree outlet as standard. 90 degrees possible. Picture shows standard guide rail size = 25 x 25 mm We are happy to send you the stack heights and specifications of the individual slat types on request. Please note: The cover panel is 2.5 cm higher than the respective stack height. The following slat colours are available. Bottom rail, guide rails and spacers come as standard in white RAL 9016, cream white RAL 9010, silver RAL 9006, RAL 9007, DB 703 or anthracite RAL 7016 and RAL 7015 at no extra charge. Rails, spacers and bottom rail can be coated in a different RAL colour at no extra charge. The head rail is always natural silver RAL 9006 and is normally concealed by the optional cover panel. Also available in RAL 7015 slate grey and RAL 7037 dust grey. Other colours on request.

Reflexa® external venetian blinds – made-to-measure exterior blinds with motor drive from a quality manufacturer. Order conveniently in the configurator. External venetian blinds for sun protection and darkening. This high-quality design (original Reflexa® external venetian blinds) allows large widths and heights at the same time and is also highly resistant to wind and storms. (Slat thickness 0.50 mm = more than twice as strong as a 50 mm slat.) All fitting brackets, consoles and any stiffening brackets for the cover plates are included free of charge with every delivery. Maximum sizes are 600 cm wide by 500 cm high with the 60 or 80 mm flanged slat. Our external venetian blinds come as standard with a 180-degree tilting mechanism. (EL 71 blackout slats: 90-degree tilt only.) A 38-degree working position or daylight-redirecting technology is available as an option. Good reasons to choose Reflexa® external venetian blinds: - high-quality, precise workmanship, lowest possible stack heights for all slat types - wide colour range and a well-proven system (all flanged slats with deep embossing, no PVC eyelet) - 80 mm flat slats also available with guide rails, so the lowest possible stack heights can be achieved - a choice of slat widths, C 60 mm, C 80 mm - 60 mm and 80 mm flat slats available with cable or rail guidance - safe delivery by our own factory lorry within Germany, by freight carrier throughout the EU and to Switzerland - minimum width with rail guidance for 60 and 80 mm flanged slats = 51 cm - minimum width for 80 mm flat slats: rail guidance = 51 cm, cable guidance = 44 cm - Please note*: with narrow widths, the blind may hang slightly askew; this cannot be avoided. - Looking for blackout external venetian blinds? See the new EL 71 N blackout slats here (please click) Our Reflexa® external venetian blinds are fully pre-assembled at the factory and are therefore easy to fit yourself. Detailed, professional fitting instructions are also enclosed. The stack heights of the Reflexa® brand are extremely low, which is a considerable advantage, particularly when fitting to conservatories. If you have any questions about fitting or before measuring, our hotline will be happy to help. The blind is driven by an integrated 220 / 230 V venetian blind motor (pre-fitted in the head rail). The motor cable is approx. 100 cm long and ends in an attached Hirschmann connector. The matching Hirschmann socket is supplied and is connected to your mains cable. Fitting is very simple. Please note: All order sizes are finished sizes of the blind, i.e. outer edge of guide rail to outer edge of guide rail = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind. Fitting options: ceiling, wall, recess. An overview of all guide rails is shown here. Spacer with guide rail, see image (standard guide rail size = 25 x 25 mm) At a glance: stack heights of the best-selling external venetian blind with 80 mm flanged slats, motor drive and rail guidance (type EL80N): We are happy to send you the stack heights and specifications of the individual slat types on request. Please note: As standard, the cover plate is 2.5 cm higher than the respective stack size. (On request we can supply cover plates with an overlap of only 1.5 cm.) The following slat colours are available. Bottom rail, guide rails and spacers come as standard in white RAL 9016, cream white RAL 9010, silver RAL 9006, RAL 9007, DB 703 or anthracite RAL 7016 and RAL 7015 at no extra cost. Rails, spacers and bottom rail can be powder-coated in any other RAL colour of your choice at no extra cost. The head rail is always natural silver RAL 9006 and is normally concealed by the cover plate, which can be ordered separately. The cover plate is made of 2 mm aluminium. Now also available: RAL 7015 slate grey and RAL 7037 dusty grey. Other colours on request. Summary: Our online shop offers a wide range of external venetian blinds for sun and heat protection. Whether self-supporting external venetian blinds or the new, patented SMS external venetian blind system from Reflexa, all systems can be ordered online in the configurator. We also deliver to Switzerland and Austria. You can choose between crank drive and motor drive, with io motors for smartphone control as an option. External venetian blinds are also ideal for retrofitting in almost any building situation. Their good heat-reflecting properties have long been known, which is why these shading systems are becoming increasingly popular for offices and homes. You can request the complete price list in the shop. We are happy to advise you.

With the SMS Plus quick-fit system for external venetian blinds, the guide rail is screwed directly to the façade or window frame with a special mounting clip, without spacers. Buy from us. A U-shaped corner cover closed at the sides is also included. It could not be simpler. Max. 400 cm wide x 360 cm high. Reflexa® quick-fit system for external venetian blinds with 80 and 60 mm beaded slats, 80 mm flat slats with extremely low stack heights or with the new 71 mm blackout slat. Here is the patented plug-in system. The system can be made up to 400 cm wide and 360 cm high. This very easy-to-fit system is pre-assembled at the factory and is particularly recommended for inexperienced end customers too. Please note: the cable holes in the pelmets are deliberately not made at the factory, so that the conditions on site can be taken into account during fitting. Pelmet heights of the finished external venetian blind (top edge of pelmet to bottom edge of bottom rail): Slat types: - EL60 N = 60 mm wide beaded slats - EL80 N = 80 mm wide beaded slats - EL80 NF = 80 mm wide flat slats - EL71 N = 71 mm wide dimout slats All slat types at a glance.

The WendoFlex slat system from Reflexa® was developed to provide lasting shade even for the largest widths and heights in special shapes. Simply order it here in our shop Fitted with the sturdy 80 mm flanged slat, it allows very large widths. The following shapes are possible. Where AsyFlex and AsyRoll reach their technical limits, WendoFlex can often still be made. This means almost any shape can be shaded. With this design, however, the slats can only be tilted; they cannot be raised. You can configure the sloping quadrilaterals type W 5 in the shop. For all other special shapes, please send us exact dimensions and a photo of the installation situation, using the dimensions requested in the drawings. The dimensions always refer to the complete geometric shape (outer-edge dimensions) that is to be covered. For the available spacers, see configurator.

These self-supporting external venetian blinds are needed when fixing the blind pelmet to the façade is not wanted or not possible. You can put together these self-supporting external venetian blinds in our shop configurator and order them. The entire construction is then held completely by the side spacers and is self-supporting. This means the pelmet and head section do not need to be screwed to the façade. Key points at a glance: - motor drive as standard / radio / io radio available for a surcharge - always supplied with a square U-shaped pelmet at no extra cost - reinforced spacers towards the wall / window frame - type EL80N = 80 mm flanged slats, type EL80NF = 80 mm flat slats - type EL71N = 93 mm (surcharge) blackout slats (note the different stack heights) - side guidance always with keder-guided rails, round or square - coupled units with double guide rails available - good heat protection, glare protection or blackout 2 different versions of the sheet metal pelmets, see the drawings below: 2 mm aluminium sheet folded into a square U shape. With the "fitting between the guide rails" option, individual pelmets with two pelmet end plates are fixed to the guide rails using retaining profiles. Visually, the guide rails run through here. With the "pelmet fitted on the guide rails" option, the pelmets are fixed to the guide rails at the ends with pelmet end plates. Visually, the pelmets run through here. The rail types at a glance: All pelmet heights for square U-channel pelmets at a glance. For round U-channel pelmets, add 1.5 cm to this list. All slat types at a glance.

Vertical slats for large window fronts and sloping windows The slats turn on their own axis to direct the light, and when pushed fully to the side they leave the window clear. This suits large window fronts and patio doors – and, with the Slope version, sloping windows too, where you enter both heights. The Decomatic is operated with a pull cord and a turning chain; the Monomatic needs just a single continuous chain. Slats are available 127 mm, 89 mm or 250 mm wide, and the track in textured white, grey or black. The vertical blind is fitted to the ceiling; wall brackets and quick-fit clips for grid ceilings are available on request under “Special requests”. Size Decomatic: up to 700 cm wide; with 127 mm slats up to 400 cm high, with 89 mm slats up to 340 cm (finished size) Size Monomatic: up to 600 cm wide and 300 cm high Operation: pull cord and turning chain (Decomatic) or continuous chain (Monomatic); Slope for sloping windows Track: white (RAL 9016), grey (RAL 7040) or black (RAL 9005), all textured Fitting: ceiling; fabrics: 259 fabrics and colours

These wooden venetian blinds are made with 25 mm wide slats. ECO head rail 25 mm wide by 25 mm high. The bottom rail, cords and wood are identical to the Old Dutch system. Simply order online All the wooden venetian blinds we offer are made with grade 1A wood. Much like coffee or tea, timber stocks are graded according to a quality standard. That is why we do not have prices per square metre, only size-band prices. Good wood is simply not cheap...... Supplied with a wooden head rail cover (at no extra cost) to match the slat colour, either straight = open at the sides, or U-shaped = closed at the sides. Straight cover approx. 5 mm wider than the slat, U-shaped cover approx. 3 cm wider than the slat Operated as standard with a cord lock to raise the slats and a wooden tilt wand to tilt the slats. The cover is attached to the head rail with magnets or hook-and-loop tape. All brackets are also included. Economy version only available with ladder cords to match the wood. The blinds are made to the exact millimetre for you. Every wooden venetian blind is made to the exact millimetre for you. The wood samples are shown in the configurator

Our wooden venetian blinds are supplied with a wooden head rail cover (at no extra cost) to match the slat colour. Configure and buy. Operated as standard with two cord locks: on the left, 2 cords with wooden tassels for tilting the slats, and on the right, one cord with a wooden tassel for raising and lowering the slats. This wooden venetian blind is also available at extra cost with electric operation via a 230 V motor. The motor is then built into the head rail at the factory and does not add bulk. The drive side (cable side) can be chosen freely. Order in the shop configurator. The head rail cover is attached to the head rail using the materials supplied. All brackets are also included in the delivery. All the wooden venetian blinds we offer are made from grade 1A wood. As with coffee or tea, timber stocks are graded according to a quality standard. That is why we do not have prices per square metre, only size-band prices. Good wood is simply not cheap ... You have the choice: ladder cords or ladder tapes at no extra cost. For all wood colours, see the configuration. If nothing is specified, we supply ladder cords as standard. The colours of the cords and tapes can also be chosen freely. If nothing is specified, we supply all cords and tapes to match the wood. Blind with ladder tapes (top) or with ladder cords (bottom). All wooden tassels match the slat colour. Stack heights when raised: Total blind height including head rail in cm -------100--150--200--250 Stack size 18 ---23 ---28 ---34 = approximate sizes Head rail cover available straight or U-shaped (i.e. open or closed at the sides) Every wooden venetian blind is made for you accurate to the millimetre. Wood samples can be found in the configuration