Roller doors up to 400 cm wide

Configure the aluminium roller door HRT05 and buy it made to measure online. Certified up to 250 cm wide x 250 cm high clear opening. (Tested according to HEROAL® certificate RT05, profile Maxi 52) Roller door LIGHT HRT05 with 52 mm Heroal aluminium profile, assembled by Reflexa in Germany. The certificate is available at the bottom of this page. Max. outer dimensions 265 cm wide x 273 cm high. German PREMIUM equipment in many colours. Box size 21 x 21 cm, bevelled at the front or, alternatively, semi-circular at no extra charge. (Picture of the door shows fitting variant 2 = behind the opening, box facing inwards. The rear box panel and guide rails are not visible from outside; the convex side of the curtain faces outwards.) All the important details of the HRT05 roller door These roller doors come as standard with a robust, high-quality integrated mechanical 230 V elero® tubular motor. No fall arrest device is needed because the curtain weighs less than 20 kg, in line with HEROAL® certificate RT05 (available as a PDF at the bottom of the page). They can optionally be operated by BECK-O-TRONIC® radio control or by a switch only. Other circuits, such as yard lighting, can also be connected to the BECK-O-TRONIC®. The BECK-O-TRONIC® has an additional manual switch function. (The description is also available as a PDF at the bottom of the page.) The LIGHT HRT05 has a 1 cm hard rubber seal on the extruded bottom profile. Certificate RT05 (see link at the very bottom), together with the associated DIN standards for doors, is met because the curtain weight does not exceed 20 kg up to a size of 250 x 250 cm. A fall arrest device is therefore not required. The foam-filled aluminium curtain (face = 52 mm high x 13.5 mm thick to DIN) is fitted like a conventional roller shutter in, behind or in front of the reveal opening. We are happy to send you fitting notes for this roller door on request. The 21 cm high x 21 cm wide box (bevelled at 45 degrees at the front) is attractive and blends in with any façade. The keder-guided rails measure 28 mm deep and 68 mm wide and allow the curtain to run almost silently. These doors are supplied pre-assembled with the curtain rolled in. Screws for fixing to the building are not included. Roller door order sizes: drive side always viewed from inside. Top edge of box to bottom edge of bottom rail = order height Outer edge of rail to outer edge of rail = order width Steel springs suspending the curtain inside the box on a sturdy 60 mm steel shaft differ from conventional roller shutter shafts in their greater stability and durability. The bottom slat of the door is finished with a standard rubber lip that compensates for slight unevenness in the floor. Our view: high-quality German Heroal® branded product and an economical option for small garage doors that are easy to install yourself. Suitable for widths up to 265 cm and heights up to 270 cm. Box and rail colour available in any RAL colour at no extra charge. Aluminium slat dimensions: Fitting variants: These roller doors can be fitted in several ways. Summary of winding direction: - if the box faces outwards (left roller), the convex side of the curtain always faces inwards - if the box faces inwards (right roller), the convex side of the curtain always faces outwards Important note on the garage: - the garage must be closed on all sides once the door has been installed (if the garage is open at the back, the increased wind load can push the curtain backwards out of the guide rails) We deliver with our own factory vehicles in secure packaging. ***Restriction: these doors are not suitable as high-speed doors or for operation every minute (supermarkets, loading bays etc.). Every tubular motor has a thermal switch and shuts the system down in the event of overload or overheating.

Buy the H55 roller door with fall arrest device from system supplier Heroal here. PREMIUM specification. For electric roller doors, the order sizes are calculated from the outside-edge width and outside-edge height. For maximum safety, always supplied with a fall arrest device. (The illustration shows fitting option 2 = behind the opening, box facing inwards. The rear box cover and guide rails are not visible from outside; the convex side of the curtain faces outwards.) As standard, our roller doors are fitted with a robust, high-quality integrated mechanical 230 V BECKER® / RADEMACHER® tubular motor (depending on stock availability) including a fall arrest device, and can optionally be operated by BECK-O-TRONIC® radio control or by a switch only. Other circuits, such as yard lighting, can also be connected to the BECK-O-TRONIC®. Our doors use Heroal® aluminium profiles. As standard, the SMART H55 has a 4 cm rubber seal on the aluminium bottom rail. For roller doors weighing over 20 kg, a fall arrest device is not an option but a requirement. The foam-filled aluminium curtain (face = 52 mm high x 13.5 mm thick to DIN) is fitted like a conventional roller shutter in, behind or in front of the reveal opening. These doors are supplied fully pre-assembled with the curtain rolled up. Fixing screws into the building structure are not included in the scope of delivery. We are happy to send you fitting notes for this roller door on request. The 23 / 25 or 30 cm high box (bevelled at 45 degrees at the front) has a clean shape and suits any façade. The keder-guided rails measure 28 mm deep and 85 mm wide and allow the curtain to run almost silently. Box heights: - up to 300 cm door width x 250 cm door height = 23 x 23 box size - up to 300 cm overall door height = 25 x 25 cm box size, above that 30 x 30 cm Roller door order sizes: drive side always viewed from inside. Top edge of box to bottom edge of bottom rail = order height Outer edge of rail to outer edge of rail = order width Steel springs suspending the curtain inside the box on a sturdy 60/70 or 125 mm steel shaft differ from conventional roller shutter shafts in their greater stability and durability. As standard, the aluminium bottom slat of the door has a 4 cm thick rubber lip with a rain drainage profile in the extruded aluminium section (see picture on the left), which compensates very well for uneven floors. To prevent the rubber seal from being completely crushed when the door closes and breaking after a while, as happens with inferior designs, we fit special stop blocks at the bottom of the side guide rails that stop the rubber from being squashed and damaged. With the OSE safety edge option with electronics, the same aluminium bottom rail system is used. The only difference is that in this case it contains the sensors for the OSE control. If no OSE rubber seal is required, we supply an ECO seal with a 1 cm rubber profile in the last slat at a reduction of EUR 29. Our view: High-quality German Heroal® branded product and a cost-effective option for small garage doors that are easy to install yourself. Can be made in any width from 160 cm to 400 cm and up to 320 cm high. (*Special heights up to 370 cm can be made; in the configurator these can be ordered up to a width of 320 cm) Box and rail colour available in white - grey - brown - silver or in a RAL colour = plus 20% surcharge Aluminium slat dimensions: Fitting options: These roller doors can be fitted in different ways. Summary of winding direction: - if the box faces outwards (left roller), the convex side of the curtain always faces inwards - if the box faces inwards (right roller), the convex side of the curtain always faces outwards. All available accessories, such as radio controls, switches, keypads, emergency crank option etc., can be found in the configuration. Important note on the condition of the garage: - the garage must be closed on all sides once the door is installed (if the garage is open at the back, the increased wind load can push the curtain backwards out of the guide rails) - when fitting 2 doors to one opening, we recommend the RD75 door system with the curtain interlocked inside the guide rails We deliver in secure packaging with 2 cm thick timber all round and a viewing window so you can inspect the goods on delivery. ***Restriction: These doors are not suitable as high-speed doors or for minute-by-minute operating cycles (supermarket, loading bay etc.). Every tubular motor has a thermal switch and shuts the system down in the event of overload / overheating. Order your high-quality motorised garage roller door with aluminium slats here in the roller door configurator up to 400 cm wide. Delivery to Switzerland, Austria and selected EU countries is possible.