Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Go to homepage
Send a message
€0.00

Made-to-measure sun protection

Reflexa® External Venetian Blind with Motor made to measure

Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
  • Width up to 600 cm, height up to 500 cm
from €598.75
incl. VAT · free shipping within Germany (except islands)
Delivery time 3-4 weeks
Configure now Advice +49 9732 3023858
Free shipping within Germany (except islands)
Payment by prepayment (bank transfer)
24 months statutory warranty
Expert advice Mon–Fri · +49 9732 3023858

Configurator

Reflexa® External Venetian Blind with Motor in 3 steps

Choose step by step. The price updates with every change, and you can change completed steps at any time.

cm
Info and measuring guide

Please state in cm.

Measuring the order width (exterior), for installation with spacers on the window frame.

- Measure the narrowest dimension from wall to inner wall edge minus 1 cm = order width. The guide rails are screwed to the window frame using spacers. Installation in the window opening.

Measuring the order height (exterior)

From the bottom edge of the window opening (also called reveal or lintel) to the top edge of the window sill, minus 5 millimetres = order height

--------------------------------------------------------------------------------

Alternative type of installation:

Measuring the order width (exterior), for installation without spacers in the wall opening.

- Measure the narrowest dimension from wall to inner wall edge without deduction = order width. Here the guide rails are simply screwed through the guide towards the side wall. Installation in the window opening.

Measuring the order height (exterior)

From the bottom edge of the window opening to the top edge of the window sill, minus 5 millimetres = order height

--------------------------------------------------------------------------------

Alternative type of installation:

Measuring the order width (exterior), for installation with spacers in front of the window opening.

- Window opening plus approx. 5 cm overlap on each side, right and left = order width

Installation on the wall, therefore, so that the raised stack of the blind is not in the field of view of the window. Side caps are required for the cover plate, see order form.

Measuring the order height (exterior)

- Window opening plus stack height = order height

--------------------------------------------------------------------------------

- Here is the specification with all exact stack heights for 80 mm flanged slats. (please click)

- Here is the specification with all stack heights for 60 mm flanged slats. (please click)

- Here is the specification with all stack heights for 80 mm flat slats. (please click)

- Here is the specification with all stack heights for 88 mm blackout Z slats. (please click)

cm
Info and measuring guide

Please state in cm.

Here is an overview of the blind heights and the corresponding package heights.

NEW package heights from 03/2022.

- Here is an overview of all package heights and slat types. (please click)

How to measure

Measuring the order width (exterior) when fitting with spacers onto the window frame.

- Measure the narrowest dimension from wall to inner wall edge minus 1 cm = order width of the external venetian blind. The guide rails are screwed to the window frame with spacers = fitting inside the window opening.

Measuring the order height (exterior)

From the underside of the window opening (also called the reveal or lintel) to the top edge of the window sill minus 5 millimetres = order height of the external venetian blind

Alternative fitting method

Measuring the order width (exterior) when fitting without spacers into the wall opening.

- Measure the narrowest dimension from wall to inner wall edge without deduction = order width of the external venetian blind. Here the guide rails are simply screwed through the rail into the side wall = fitting inside the window opening.

Measuring the order height (exterior)

From the underside of the window opening to the top edge of the window sill, minus 5 millimetres = order height of the external venetian blind

Alternative fitting method

Measuring the order width (exterior) when fitting with spacers in front of the window opening.

- Window opening plus approx. 5 cm overlap on the right and left = order width of the external venetian blind. The blind is therefore fitted to the wall so that the raised slat stack is not in the field of view of the window. Side caps are required for the cover plate, see configuration.

Measuring the order height (exterior)

- Window opening plus stack height plus 3 cm = order height of the external venetian blind

Phone: +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Quantity discount
Info and measuring guide

If your total order comprises more than one blind, please select the applicable quantity discount. The discount is then automatically applied and calculated by the system.

The discount applies regardless of whether the blinds are of different sizes.

Motor side
Info and measuring guide

This specification depends on the structural conditions on site where the electrical connection is planned.

Please always select the drive side as seen from inside.

If you need 2, 3 or 4 blinds and want to operate them with radio motors, select the radio motor without hand transmitter and, under accessories, a 5-channel hand transmitter. You can then operate all the blinds with one hand transmitter.

Delivery is always with a Hirschmann coupling.

Motor type
Info and measuring guide

SOMFY io motors are a new type of radio module that can be operated via smartphone and tablet. (further SOMFY accessories required)

When you order io motors, we supply the basic prerequisite for integrating your blinds into a home network for automation.

The normal RTS radio modules are not compatible with the io modules. So if you have a normal sun/wind control installed on site or do not want smartphone or tablet networking, please select normal RTS radio modules.

All motors are 220 / 230 V mains motors.

ELERO Comfort motors set their end positions themselves. No manual adjustment required.

Control
Slat and guide
Info and measuring guide

Please select the slat width here.

With flat slats, the slat stack in the raised position is reduced by approx. 25 %.

Explanation:

- flanged slats are bent over at the sides = flanged, which makes them very stable but gives slightly higher stack heights

- flat slats are made of the same material in the same thickness, but are more sensitive to storms at larger widths. Because of their flat shape, the stack heights are smaller

We recommend rail guidance for every blind, as this version is very resistant to storms.

Type
Info and measuring guide

Here you have the option of ordering double guides (double guide rails or double cable tensioners, depending on the blind version) at no surcharge.

Type

If you want to install several blinds next to each other on a house front, with each unit having its own drive but joined at the ends by a double guide, select coupled blind in the selection: delivery 1 x single guide (for the side guidance) and 1 x double guide, in which the units are to run together. The measuring is the same. Width as always = outer edge of guide rail to outer edge of guide rail, which for a double guide rail would be the centre point of the double guide rail.

With cable guidance = outer edge of slat to outer edge of slat.

For 3 units that are to run together side by side, proceed in exactly the same way. Then please select centre coupled blind for one blind. For 3 blinds, for example, you will then receive 2 x single guides and 2 double guides.

We have discontinued the option of ordering coupled blinds with only one drive for 2 blinds. The reason is that the textile tapes in the blinds are subject to differing shrinkage. This means that with 1 drive and 2 blinds, the units will hang unevenly over time. Subsequent adjustment/levelling of the heights is not possible with coupled units with only one drive.

We therefore only offer coupled units each with their own drive.

Additional cable guide
Info and measuring guide

This is recommended for blind widths over 3 metres.

An additional hole is punched in the slats and a plastic-coated steel cable is threaded through. An angle bracket in a matching colour is supplied for tensioning the cable.

For asymmetrical additional tensioning, please enter the dimension under “Notes”. Please also state from which side you measured. (Left or right, as seen from inside or outside)

Fitting type
Info and measuring guide

Ceiling installation = installation in the reveal towards the ceiling or under a roof overhang.

--------------------

Wall installation: installation in front of the reveal opening towards the wall (brackets are supplied)

Textured paint
Colour

The colour dots show an approximate shade – screen colours may differ from the original.

Info and measuring guide
Colour
Rail colour

The colour dots show an approximate shade – screen colours may differ from the original.

Info and measuring guide

The bottom rail, spacers and side guide rails (with cable guidance, this applies to the tensioning brackets at the bottom) are manufactured in this colour.

Even with special colours, everything is always coated together in the same colour: side rails, bottom rail and spacers.

The head rail is always natural silver RAL 9006. Please enquire about special requests.

Extras
Info and measuring guide

- 38 degree working position:

When the venetian blind is lowered, the working position engages automatically and tilts the slats to a 38 degree opening angle. This angle ensures optimum sun and glare protection and meets the requirements of the German Workplaces Ordinance. The working position is held in any stopping position of the blind and can also be deactivated in any position.

- Daylight-guiding technology: (one third of the blind height)

The principle is that the slats in the upper section are tilted differently from those in the lower section. This allows you to regulate the incoming daylight yourself as required.

Info and measuring guide
Spacer

If you do not select any spacers, we will supply the standard size.

Spacer

On request without spacers, for screwing the guide rail through the guide, within the reveal.

Spacer

Blackout rails without lateral light ingress, type S 70, two-part. Particularly useful with the blackout slats Z88 or S93 if maximum darkening is required.

The colour of the spacers is always identical to the colour of the bottom rail and side guide rails.

Info and measuring guide

All controls have a switch function. An extra switch is not required. A switch is only required if the blind is to be operated by it alone. Third-party switches can also be used.

We supply the optional radio wall transmitter in an attractive surface-mounted version, type Centralis RTS from Somfy.

We will also be happy to advise you by phone on further radio accessories or controls.

Optionally, we can offer you a 5-channel or 1-channel hand transmitter with scroll wheel (fine slat adjustment). The angle of incident light can be set precisely using the scroll wheel.

or a radio timer in the hand transmitter, type SOMFY Telis 16 RTS

(up to 6 groups programmable)

Accessories

Isolating relays are only required if you want to operate several venetian blinds with one sun and wind control.

For example:

2 blinds, one sun and wind control.

- 1 isolating relay is required (one blind is connected directly to the control, each additional blind requires an isolating relay)

Info and measuring guide

We can supply L-shaped fascias or U-channel fascias (square-edged).

If you order the aluminium cover fascia "YES", we always supply the fascia 1 cm wider than the blind width.

If you need a different fascia width, please enter this under “Notes” or ask us by phone on 09732 3023858.

We can supply L-shaped fascias or U-channel fascias (square-edged).

High-quality coating, in a 2 mm thick version.

If you order aluminium cover fascia "YES", we always supply the fascia 1 cm wider than the blind width.

If you require a different fascia width, please enter this under “Notes” or ask us by phone on 09732 3023858.

- please enter the width here in the format

for example: 212.5 cm

For installation in the reveal, the trim should be as wide as the reveal minus 0.5 cm.

For installation in front of the reveal opening, the trim should be 1 cm wider than the blind dimension.

For installation in front of a conservatory or around a corner, a wider trim is usually required. You can choose and enter the dimension freely.

The developed height is always adapted to the blind height.

The colour of the cover trim is always the same as that of the side rails and bottom rail of the blind.

The manufacturer is REFLEXA-Rettenbach.

The height of the cover trims is automatically adapted to the stack heights. We supply the trims in L or U shape.

If you need wider cover trims (e.g. for coupling on a conservatory etc.), please enter the exact width under “Notes”.

Aluminium angled pelmet Aluminium angled pelmet Aluminium angled pelmet

As standard fascias, we supply fascias in L or U shape for mounting on a wall, ceiling or reveal. The lower flange is bent inwards. (edge protection, see fascia types 2 above)

-----------------------------------------------------------------------------

Alternatively, at no surcharge, we can offer the following fascias as plaster carriers type 2.1 and 5.1 for integration into a façade that is still to be insulated. In this version, the lower flange is bent outwards so that it can be used as a plaster edge. The bent dimension P 1 is 2 cm. These fascias are also available as L or U trims. Plaster carrier fascias are always supplied in natural silver, uncoated. When using plaster carrier fascias, please note that thermal reactions may occur due to the different material properties of the aluminium fascias and the plaster carrier boards. Please always consult your architect about this.

Aluminium angled pelmet Aluminium angled pelmet
Side cap
Info and measuring guide

These are required if you want to install in front of a reveal opening, in order to close off the cover plate at the sides. (riveted firmly to any angle plate at the factory)

Butt connector
Info and measuring guide

These are required if two plates are to be joined so that a window front is covered uniformly by the cover plate.

For example, you have 2 blinds on a façade that are to be installed next to each other. However, the plate is to be continuous. You therefore order 2 plates with only one side cap each and a butt connector in the middle. The two plates then usually have to be wider than the blind. Please enter the exact width under “Notes”.

Call-back service
Please complete all steps first.

Product description

Reflexa® external venetian blinds – made-to-measure exterior blinds with motor drive from a quality manufacturer. Order conveniently in the configurator. External venetian blinds for sun protection and darkening.

This high-quality design (original Reflexa® external venetian blinds) allows large widths and heights at the same time and is also highly resistant to wind and storms. (Slat thickness 0.50 mm = more than twice as strong as a 50 mm slat.) All fitting brackets, consoles and any stiffening brackets for the cover plates are included free of charge with every delivery. Maximum sizes are 600 cm wide by 500 cm high with the 60 or 80 mm flanged slat. Our external venetian blinds come as standard with a 180-degree tilting mechanism. (EL 71 blackout slats: 90-degree tilt only.) A 38-degree working position or daylight-redirecting technology is available as an option.

Good reasons to choose Reflexa® external venetian blinds:

- high-quality, precise workmanship, lowest possible stack heights for all slat types

- wide colour range and a well-proven system (all flanged slats with deep embossing, no PVC eyelet)

- 80 mm flat slats also available with guide rails, so the lowest possible stack heights can be achieved

- a choice of slat widths, C 60 mm, C 80 mm

- 60 mm and 80 mm flat slats available with cable or rail guidance

- safe delivery by our own factory lorry within Germany, by freight carrier throughout the EU and to Switzerland

- minimum width with rail guidance for 60 and 80 mm flanged slats = 51 cm

- minimum width for 80 mm flat slats: rail guidance = 51 cm, cable guidance = 44 cm

- Please note*: with narrow widths, the blind may hang slightly askew; this cannot be avoided.

- Looking for blackout external venetian blinds? See the new EL 71 N blackout slats here (please click)

Our Reflexa® external venetian blinds are fully pre-assembled at the factory and are therefore easy to fit yourself. Detailed, professional fitting instructions are also enclosed. The stack heights of the Reflexa® brand are extremely low, which is a considerable advantage, particularly when fitting to conservatories. If you have any questions about fitting or before measuring, our hotline will be happy to help.

The blind is driven by an integrated 220 / 230 V venetian blind motor (pre-fitted in the head rail). The motor cable is approx. 100 cm long and ends in an attached Hirschmann connector. The matching Hirschmann socket is supplied and is connected to your mains cable. Fitting is very simple.

Please note: All order sizes are finished sizes of the blind, i.e. outer edge of guide rail to outer edge of guide rail = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind.

Fitting options: ceiling, wall, recess. An overview of all guide rails is shown here.

Spacer with guide rail, see image (standard guide rail size = 25 x 25 mm)

At a glance: stack heights of the best-selling external venetian blind with 80 mm flanged slats, motor drive and rail guidance (type EL80N):

We are happy to send you the stack heights and specifications of the individual slat types on request.

Please note: As standard, the cover plate is 2.5 cm higher than the respective stack size. (On request we can supply cover plates with an overlap of only 1.5 cm.)

The following slat colours are available. Bottom rail, guide rails and spacers come as standard in white RAL 9016, cream white RAL 9010, silver RAL 9006, RAL 9007, DB 703 or anthracite RAL 7016 and RAL 7015 at no extra cost. Rails, spacers and bottom rail can be powder-coated in any other RAL colour of your choice at no extra cost. The head rail is always natural silver RAL 9006 and is normally concealed by the cover plate, which can be ordered separately. The cover plate is made of 2 mm aluminium.


Now also available: RAL 7015 slate grey and RAL 7037 dusty grey. Other colours on request.

Summary:

Our online shop offers a wide range of external venetian blinds for sun and heat protection. Whether self-supporting external venetian blinds or the new, patented SMS external venetian blind system from Reflexa, all systems can be ordered online in the configurator. We also deliver to Switzerland and Austria. You can choose between crank drive and motor drive, with io motors for smartphone control as an option. External venetian blinds are also ideal for retrofitting in almost any building situation. Their good heat-reflecting properties have long been known, which is why these shading systems are becoming increasingly popular for offices and homes. You can request the complete price list in the shop. We are happy to advise you.



Technology & fitting

Key data from the configurator

Sizes
Width up to 600 cm · height up to 500 cm
Delivery time
3-4 weeks

Instructions & downloads

Advice

Personal expert advice

Not sure about size, fabric or fitting? Call us or let us check your configuration before production.

+49 9732 3023858

Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Have my configuration checked

What customers say

4,83
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert

Overall rating of our shop on ProvenExpert. As of 18.10.2026

All reviews on ProvenExpert

Reviews of this product

Reflexa® External Venetian Blind with Motor
This website uses cookies to ensure the best experience possible. More information...