Insect screens

Motorised insect screen roller blind for large windows and sliding doors This insect screen roller blind is driven by a motor and is intended for large window fronts and sliding systems up to 5 m wide. You can choose a 230 V motor operated by switch or radio, or the ER2/21 version with a 12 V battery and solar module. The housing comes in white or anthracite grey. Depending on the version, the box and guide rails are fitted in the reveal or in front of the opening. Important: the 230 V connection must be made by a qualified electrician. You measure the clear opening of the reveal or from lintel to floor in millimetres; each version explains how to work out the order size. Size: up to 5000 mm wide and 4000 mm high (order size) Versions: 5 Drive: 230 V motor with or without radio control, ER2/21 with 12 V battery and solar module Fitting: in the reveal or in front of the opening; 230 V connection by a qualified electrician Housing: white or anthracite grey

Reflexa® F 2.8 fly screen frame with spring pins in a high-quality version. Made to measure and delivered ready to fit. Fitted between the roller shutter and the window frame. Configure and buy in our shop. High-quality workmanship on all aluminium profiles, extruded profiles. No plastic inserts, but high-quality aluminium connectors. Quality fibreglass mesh in grey or black, or special mesh as an option: stainless steel or with pollen protection, matching our Reflexa® insect screen doors and roller screens. Any RAL profile colour possible at no extra charge. If you need a straight finish on the inner contact surface of the fixed frame, or if fitting between the roller shutter rails is essential, choose this F 2.8 fixed frame. The fixed frames are simply clamped into the timber or PVC frame using special spring pins (holes in the frame are required). The fixed frames are ready to fit. Fully assembled fixed frame, viewed from outside. Space required: 9 mm depth. Brush seal all round on the outer edge of the frame. Fitting options: in front of the window frame; between the roller shutter rails. The profile thickness of the insect screen frame is 8 mm. Installation depth 9 mm. A centre bar is fitted for heights / widths over 120 cm.

Insect screen door for balconies and patios – opens like a door The hinged screen door has an aluminium frame with a crossbar and opens just like an ordinary door. It is available for single balcony and patio doors and as a double version for French doors. On request it can have a kick panel at the bottom, for example if you have pets. Depending on the version, the door is screwed onto the door frame or set into the reveal. You can choose from 12 meshes, from fibreglass to stainless steel, and 7 frame colours. You measure the clear opening of the door frame or reveal in millimetres; each version shows the order size. Size: up to 2400 mm wide and 2500 mm high (order size) Versions: 10 – on the frame, in the reveal or double for French doors Extras: kick panel at the bottom on request Fitting: screwed onto the door frame or in the reveal Mesh: 12 types, from fibreglass to stainless steel; frame colours: 7

Hinged insect screen frame – swings open for airing and cleaning The hinged frame swings open just like a window sash, so the window remains easy to reach for airing and cleaning. As a swing window version, the frame opens both inwards and outwards and then closes by itself. The hinged frame is suitable for timber, uPVC and aluminium windows. Depending on the version, it is screwed onto the outside of the outer frame or set into the reveal. You can choose from 12 meshes, from fibreglass to stainless steel, and 7 frame colours. You measure the clear opening of the outer frame or reveal in millimetres; each version explains how to work out the order size. Size: up to 1300 mm wide and 2000 mm high (order size) Versions: 10, including swing windows Fitting: on the outer frame or in the reveal Mesh: 12 types, from fibreglass to stainless steel; frame colours: 7

Reflexa® E 2.8 insect screen fixed frame in a high-quality design. Made to measure and delivered ready to fit. Configure and order in our shop. The aluminium profiles are mitred at the corners. No plastic inserts, but high-quality aluminium corner connectors. The equally high-quality, rot-proof fibreglass mesh is available in black, grey, stainless steel or with pollen protection, to match our Reflexa® insect screen doors and roller screens. If you need a flush finish on the inside where the frame rests, choose the E 4 fixed frame from our range. The frames are simply clamped into the sash using special turn clips. For different sash thicknesses, we supply different-sized brackets of your choice at no extra cost. Fully fitted fixed frame, viewed from outside. These fixed frames cannot be used where roller shutter rails are fitted directly in front. Space required: 9 mm depth. Fitting options: in front of the window frame. The insect screen frame profile is 8 mm thick. Installation depth 9 mm. A centre bar is fitted above 120 cm height / width.

An insect screen fixed frame for your window The fixed frame is an aluminium frame with tensioned mesh that sits on the outside of the window. There are 19 fixing options for uPVC, timber and aluminium windows, including windows with roller shutters. In autumn you simply lift the frame out. Depending on the fixing, angle brackets grip around the outside of the window frame, hook-in clips hold it in the frame without drilling, or the frame sits in the outer frame or in the wall reveal. You can choose from 12 meshes, from fibreglass and pollen protection to stainless steel, and 7 frame colours. You measure the clear opening of the window frame in millimetres; each fixing explains how to calculate the order size. Size: up to 2000 mm wide and 2500 mm high, less with some fixings (order size) Fixings: 19 – angle brackets, hook-in clips, in the outer frame or in the wall reveal Mesh: 12 types, from fibreglass and pollen protection to stainless steel Frame colours: 7 Larger sizes and special shapes on request

Insect screens for roof windows For roof windows there is an insect screen roller blind that is fitted in the window's inner lining. Which version fits depends on how the lining runs at the top and bottom. Alternatively, the SD1/1 is a fixed frame for roof windows. A centrifugal brake lets the special mesh roll up gently. You can choose standard, Transpatec, fine-mesh or electrosmog mesh, in 7 colours. You measure the clear opening of the inner lining in millimetres; each version explains how to work out the order size. Size: up to 1600 mm wide and 2000 mm high (order size) Versions: 5 – roller blinds for different lining shapes and the SD1/1 fixed frame Fitting: in the inner lining of the roof window Mesh: standard, Transpatec, fine mesh or electrosmog; 7 colours Centrifugal brake for gentle roll-up

Insect screen roller blind – down only when you need it With this insect screen roller blind, the mesh rolls up into a box and is only pulled down when needed. The rest of the time it stays out of sight. It suits windows as well as doors. A centrifugal brake makes sure the special mesh rolls up gently. The box and guide rails are screwed into the reveal or onto the outer frame. You can choose standard, Transpatec, fine-mesh or electrosmog mesh, in 7 colours. You measure the clear opening of the reveal or outer frame in millimetres; each version explains how to work out the order size. Size: up to 2000 mm wide and 3000 mm high (order size) Versions: 6, for windows and doors Fitting: screwed into the reveal or onto the outer frame Mesh: standard, Transpatec, fine mesh or electrosmog; 7 colours Centrifugal brake for gentle roll-up

Light well covers – let light and air in, keep leaves and small animals out A made-to-measure cover keeps leaves, insects and small animals out of your basement light well, while light and air still get through. There are 12 versions: LiSA rests on the rim of the well, while ELSA and TERRESA sit inside the well and can be walked on. RESi with a polycarbonate sheet also keeps the rain out. For the grille you can choose stainless steel mesh, expanded metal or welded mesh. The frame is aluminium, available in three colours and optionally with anti-lift protection. You measure the clear opening of the well rebate; each version explains how to work out the order size from this. Larger sizes and special shapes are available on request. Size: up to 200 cm wide, 60, 90 or 130 cm deep depending on version (order size) Versions: LiSA, RESi, ELSA and TERRESA – 12 in total Fitting: LiSA and RESi screwed from above or fixed with cavity anchors, fixing brackets or butyl sealing tape; ELSA and TERRESA laid in RESi with wall connection: screwed to the house wall Grille: stainless steel mesh, expanded metal or welded mesh; aluminium frame in three colours

The new PL2 pleated screen door stands out above all for its wide range of uses. This system can be made in one piece up to 300 cm wide and 300 cm high, so large patio openings can be covered in a single piece without compromising ease of use. Order here in our shop configurator. The well-engineered Neher® insect screen system technology makes this possible. Three different bottom rails are available: a self-adhesive ultra-slim bottom rail (black or silver) only 8 mm high, an 8 mm rail with a 7-degree incline for sloping surfaces, and a 19 mm screw-on bottom rail (matched to the frame colour). The units can be ordered in silver-grey anodised, white RAL 9016, anthracite RAL 7016, light brown RAL 8001, mid brown RAL 8014, dark brown similar to RAL 8077, moss green RAL 6005 and fir green RAL 6009, covering a very wide range of colours. The pleated insect screen door is made precisely to measure at the factory and supplied disassembled for transport reasons. Assembly, however, is very simple. Ultra-slim floor rail with adhesive tape, no drilling. 19 mm high floor rail for screw fixing When fitting in front of a recess, the rail widths must be added on all sides. The order sizes are always the finished sizes / outer-edge dimensions of the finished pleated screen door) The key facts about the insect screen door at a glance: - max. size for one-piece doors is 300 cm wide x 300 cm high - frame material: high-quality coated extruded aluminium - high-quality pleated insect mesh (special synthetic fibre), anthracite - supplied with fixing kit for standard fitting - recess fitting or face fitting possible - storm protection (green mesh glider) included from a width of 131 cm - mesh size 1.53 x 1.33 mm Pleated insect screen doors can be shipped to selected EU countries.

We can offer Reflexa® hinged insect screen frames in 8 standard colours at no extra charge. Configure and buy in our shop. Profile colours available (white RAL 9016, anthracite RAL 7016, ochre RAL 8001, black-brown shade 8077, silver anodised EV1, anthracite metallic DB 703, brown RAL 8014 and matt bronze C33). The UV-stable piping is always black or grey and is matched as closely as possible to the frame colour. Max. width = 130 cm x max. height = 210 cm. The extruded aluminium frames have a high-quality coating and are torsionally rigid. A brush seal is fitted at the top and bottom, and a magnetic strip on the vertical closing edge. The counterpart of the magnetic strip on the window or door frame is self-adhesive and very easy to fit. The fibreglass mesh is either black or grey. The hinges are low-maintenance aluminium hinges. From a height of 150 cm, a handle bar is fitted as standard (handle bar width = 65 mm), which provides greater torsional rigidity in the middle section. For smaller heights, the frame is operated with a handle knob, see picture. No kick plate is fitted at the bottom of these hinged frames. Opening and closing is done exclusively via the 65 mm wide handle bar in the middle on doors and via the handle knob on windows. View from inside: this sample unit is under 150 cm high and is operated by a handle knob. Over 150 cm height = made with a centre bar.

These insect screen frames are mainly used where the sash rebate is slightly angled and the window closes flush without any protruding parts. Fitted in the clear sash opening. The smallest size of the hook-in brackets is 14 mm. Fixed brackets at the bottom and pivoting brackets at the top for easy hooking in. The profile itself is just 10 mm thick. We can offer the Reflexa® Flylock® fixed-frame insect screens in 8 standard colours at no extra cost (white RAL 9016, anthracite RAL 7016, ochre RAL 8001, black-brown shade 8077, silver anodised EV1, anthracite metallic DB 703, brown RAL 8014 and matt bronze C33). The UV-stable keder is always black or grey and is chosen to match the frame colour as closely as possible. Max. width = 230 cm x max. height = 230 cm. A crossbar is fitted above 120 cm height / width. The extruded aluminium frames have a high-quality coating and are torsion-resistant. A brush seal is fitted all round. The fibreglass mesh is either black or grey.

Configure and buy a high-quality Reflexa® insect screen sliding door and sliding frame in any RAL colour, made to measure in our shop. Reflexa sliding systems are elegant and space-saving – the convenient solution for large openings such as patio or conservatory doors. Thanks to well-engineered technology, the sliding panels open and close almost silently. The reinforced frame profile always keeps the insect screen perfectly in shape. You can configure this system freely in our shop. Advantages of insect screen sliding doors - suitable for flush or offset doors - ball-bearing rollers ensure quiet, smooth opening and closing - easy configuration and ordering in the shop - barrier-free installation for wheelchair access is possible - high-quality workmanship and long service life thanks to Reflexa's in-house manufacturing of insect screen sliding frames The mesh / insect screen fabric can be ordered as standard in black or grey fibreglass. Also available with a pollen protection function at a surcharge. The sliding rails can be ordered in any length you like; this does not affect the price. A centre bar is fitted automatically at the factory for heights over 150 cm. If you have any questions about measuring, we will be happy to help by phone. Any other profile colour is available at no extra charge. Summary: Made-to-measure insect screen sliding frames can be used in many situations and are becoming increasingly popular. The profile parts are available in many colours at no extra charge. The sliding panels run on 2 rails, so the whole system glides smoothly in its runners. Configure your new insect screen sliding frame online in the Reflexa insect screen shop.

Light and quiet. Buy the high-quality Reflexa® insect screen swing doors PT 1, PT 3 and step-free PT 3 BL online. Comfortable to use thanks to soft closing by a durable return spring. Thanks to the various mounting frame options and the low installation depth of just 13 mm, Flylock swing doors can be fitted to all common existing door types. For cleaning or during the winter months, the swing door can easily be lifted in and out. Brushes all round and magnets floating in the outer edges ensure all-round protection and even closing. The door opens freely in both directions. It has a kick plate at the bottom and a 6.5 cm wide recessed handle bar in the middle. New features 10/2025 Precision – high-precision hinge solution Flexibility – adjustable door leaves for a perfect fit Maintenance-free – even closing thanks to a durable spring Tightness – brushes all round provide an almost complete seal Smooth movement – minimal friction thanks to single-sided brushes Cleanliness – no open grooves, simple and hygienic Elegance – closing and hinge mechanism integrated in the profile chamber, hinges largely concealed The mesh is made of fibreglass in black or grey, as you prefer. All aluminium profile parts are mitre-cut and bonded with two-component adhesive. Every door has a high-quality coating and a UV-stable keder. Typical Reflexa®. Single-leaf insect screen swing door Quickly in or out: open with a light push, and the door closes again by itself, silently – that is the clever swing technology from Flylock. The pivot side can be chosen freely. Always viewed from the outside, standing in front of the door. Horizontal section. Vertical section. The recessed handle bar is always in the middle as standard. Scope of delivery, insect screen swing door: - swing door fully pre-assembled in the mounting frame - cover caps - fitting instructions - standard fitting kit (14 sheet-metal screws 4.2 x 19) Measuring instructions for swing door PT 3: Order width = clear opening width plus 7.4 cm Order height = clear opening height plus 7.4 cm Horizontal section. Or as the step-free swing door PT 3 BL, closed on 3 sides only, with a loose L-angle rail at the bottom and a brush seal on the door. Measuring instructions for swing door PT 3 BL Order width = clear opening width plus 7.4 cm Order height = clear opening height plus 3.3 cm Other profile colours are also available at no extra cost. Order this made-to-measure insect screen swing door in our shop, for almost any building situation. Effective insect protection for your home, made to measure to the millimetre.

You can order these high-quality light well covers and other Reflexa® insect screens in our shop. Key facts: - high-quality stainless steel mesh, weather-resistant, profiles anodised silver, reinforced profile corners - fixed underneath with rubber adhesive tape A further distinction is made as to whether the cover is made without brush seals on all 4 sides, or whether the light well cover has no brush on 3 sides and a brush seal on 1 side at the back, towards the wall. Shown here without overhangs, without brush seals all round, type LA-1 Shown here with side overhangs, with brush seals all round underneath, type LA-1B Alternative version LA-2 = without overhang like LA-1, but 3 sides without brush and 1 brush at the back (light well opening) or LA-2B = with overhangs like LA-1B, but 3 sides with brush underneath and 1 brush at the back (light well opening)

This Reflexa® pleated insect screen door is a robust, space-saving system with a profile depth of only 21 mm. It is particularly suitable where space is limited and a solid solution is needed. You can order pleated screen doors online in our shop. Thanks to the specially folded dark grey or black mesh, the pleated insect screen folds down to around 2% of its actual width when opened and is then barely noticeable. Even so, the robust, weather-resistant mesh is not affected by light knocks and keeps its shape when touched. In short: a very high-quality pleated insect screen door from Reflexa that keeps its shape. The stacking side (when pushed together) is always stated as viewed from outside and is the opposite of the overall closing direction. Type PL 1 (standard floor guide rail, 3 cm high) Type PL 1 U (with low floor guide rail, 1 cm high) With type PL1 U, the floor rail is screwed downwards into the floor: Key data: - max. size for single doors is 250 cm wide x 280 cm high - frame material: high-quality coated extruded aluminium - high-quality pleated polyester mesh, black or anthracite grey - supplied with fixing kit for standard fitting Profile colours other than those shown here are available at no extra charge. For transport reasons, pleated screen doors over 120 cm wide or high are supplied unassembled. Assembly on site is very simple. Pleated insect screen double doors up to 490 cm wide are also available on request (divided symmetrically or asymmetrically).

Sliding insect screen for patio and lift-and-slide doors The sliding system has a sliding panel with an aluminium frame that runs in a top track and a guide rail. It is designed for sliding and lift-and-slide doors with a surrounding frame and can be single or double; as a double version with panels opening in opposite directions, widths of more than 4 m are possible. The running track and guide rail are fixed at the top and bottom of the door frame, and the panel is then hung in. You can choose from 12 meshes, from fibreglass to stainless steel, and 7 frame colours. You measure the clear outer dimension of the door frame in millimetres; each version shows the order size. Size: up to 5200 mm wide and 3500 mm high (order size) Versions: 6 – single or double with opposing panels Fitting: running track and guide rail at the top and bottom of the door frame, panel hung in Mesh: 12 types, from fibreglass to stainless steel; frame colours: 7

Swing insect screen door – swings open and closes by itself The swing door opens both inwards and outwards and then closes again on its own. This makes it a good choice for patio doors that are used a lot – even when your hands are full. A grab bar comes as standard, and you can add a centre bar or a kick panel. Depending on the version, the swing door sits on the door frame, in the reveal or as a double door in the opening. You can choose from 12 meshes, from fibreglass to stainless steel, and 7 frame colours. You measure the clear opening of the door frame or reveal in millimetres; each version shows the order size. Size: up to 2600 mm wide and 2500 mm high (order size) Versions: 7 – on the frame, in the reveal or double Features: grab bar as standard, centre bar or kick panel optional Fitting: screwed onto the door frame or in the reveal Mesh: 12 types, from fibreglass to stainless steel; frame colours: 7

Easily configure double pleated insect screen doors from Reflexa® Flylock, two-panel and made to measure, and buy them in our shop. No delivery charges within Germany. Key features: - thanks to the specially pleated grey or black mesh, the pleated insect screen folds back to almost 2% of its actual width when opened (per panel) and is therefore barely noticeable - sturdy, rot-resistant mesh, insensitive to light knocks, flame-retardant - easy installation, asymmetrical division also possible - 4 versions and 2 bottom rails make this product very versatile to install - any RAL colour (frame and rails) is available at no extra charge. A very high-quality, dimensionally stable pleated insect screen door from Reflexa. Below are the different pleated screen types and bottom rails, PL 1 D or PL 1 U and PL 2 D or PL D U; for the selection see configurator. The measuring explanation is intended for recess fitting. If fitting directly onto the frame or onto an open surface, adapt the measurements to the unit dimensions. All order sizes are finished sizes / outer-edge dimensions of the finished pleated screen door. Order width = clear width plus 60 mm Order height = clear height minus 2 mm The pleated screen can be divided symmetrically or asymmetrically, see configurator. The handle rails are 45 mm wide per panel. This shows a simulation of fitting on the frame, i.e. in front of the recess.