Outdoor

With lateral zip fabric guide using a zip system for optimum fabric tension. The fabric is tensioned on all sides. Single units can be made up to 600 cm wide with a 500 cm projection. Configure the Reflexa® LifeSmall Zip in our shop and order online. Also available with a Variovolant on request. Another option for shading a glass roof from below is the more economical standard under-roof awning. Key features: - electric motor as standard (crank drive not possible) - optionally radio-controlled with either a wall transmitter or a hand transmitter - optionally with bidirectional radio (Somfy iO standard) - iO allows integration into a smart home system and operation via the Somfy app - lateral zip guide of the fabric into the guide rail - optionally with D-valance (Variovolant, extendable up to 150 cm by crank) - choice of 650 colours for cassette and frame – at no extra charge - the installation height including cassette is only 16.4 cm The picture shows an under-glass awning with extendable Variovolant. The valance is attached to the front profile. The picture shows the front end profile without Variovolant. The picture shows the zip system connecting the fabric to the rail, viewed from below. Smooth running and precise guidance. The order width is always the centre-to-centre dimension, see measuring help. This corresponds to the centre of the fixing point of the guide rail brackets. The projection is the narrowest installation dimension in the direction in which the fabric extends, minus 2 cm. Advantages of a zip awning: - optimum fabric tension - no light gaps at the sides - can be made specially and exclusively as an under-glass awning with an additional Variovolant This system is also available as a 2-part shading unit.

Reflexa® replacement awning fabrics are always charged per square metre. All fabrics have a water-repellent (Teflon) finish. They are acrylic fabrics weighing approx. 290 g/m². You can order the valance straight or scalloped. Example calculation and measuring: fabric width e.g. 396 cm, projection (height) 203 cm + valance 19 cm high = order width 396 cm x order height 222 cm Shipping throughout the EU. The hems (into which the existing PVC cord/keder is inserted) are made 2.5 cm wide as standard. If you need a different size, please let us know as a special request. The full fabric selection can be found in the configuration. - plain fabrics - block stripes - multi-stripes

Order and buy the Reflexa® LifeSmall under-roof awning up to 600 cm wide x 450 cm projection in our shop. Delivery to Switzerland and Austria is available. An under-roof awning is designed for situations where fitting over or on top of the roof is not possible for technical reasons. The LifeSmall is simply fitted underneath an existing roof structure, so the fabric is not exposed to dirt, wind load or moisture. A finished under-roof awning. The corner end profile runs right through to the end. - Standard frame colours white RAL 9016, silver RAL 9006, grey-brown RAL 8019, 3 grey metallic shades and any other RAL colour. All special colours at no extra cost - Somfy or ELERO motor fitted as standard - can also be operated by crank at a reduced price - high-quality awning fabric from the Reflexa® collection - from 450 projection = fabric support wire included to prevent the fabric from sagging - cassette height only 14.8 cm On awnings over 400 cm wide or 250 cm projection, increased and possibly noticeable sagging of the fabric may occur. This reflects the current state of the art and does not affect the function or use of the awning. In borderline cases, an additional fabric support wire can counteract this. (option in the configurator) (the centre distance varies depending on the drive, see drawings) Fitting on beams with crank drive TOP picture --- fitting on beams with motor drive. The minimum distances refer to the positions of the mounting brackets on the awning box. Measuring the projection for all types of fitting: - rear edge of universal bracket at the back of the awning box to front edge of guide rail (for recess fitting, we recommend deducting 1 - 2 cm) Measuring the width when fitting with reveal brackets: - inner edge of reveal to inner edge of reveal minus 8 cm for crank drive and minus 6 cm for motor drive (this is also the centre distance) Detail of the side guide rails and the end profile. Outside and inside view. Here you can see the rail holder and, below, the available reveal brackets. Summary of product features This under-roof awning is identical in construction to the T200 under-glass awning from the system supplier Varisol. You can configure this interior conservatory shading online and order it in our shop. In certain situations it may be necessary to split the awnings and fit them side by side. Coupled under-roof awnings are not possible for technical reasons. The price of this conservatory shading always depends on the width and projection. Another form of under-roof sun protection is the Plafond PL 11 pleated blind, which shades individual panes at low cost. Unlike the under-glass awning, the pleated blinds are operated with a hand operating rod. If you have any questions about the best shading for your property, we are happy to help by phone. For external conservatory shading, choose the Life conservatory awning For conservatory shading with variable guide rails for special shapes or sloping shading, choose the LifeFlex conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

Full-surface shading from Reflexa® for conservatory roofs, with no light gaps at the sides thanks to zip technology. The zip-like system prevents the awning fabric from sagging at the sides. Larger areas up to 12 m wide are possible, and the awning can also be used in locations exposed to wind. Configure and order this conservatory shading in our shop. Features and product details: - Somfy electric motor as standard - optional radio control with wall or hand transmitter - optional bidirectional radio for smart home integration and operation via app - zip side guides with no light gaps at the fabric - protective cover for the drop bar when retracted (closed cassette) - choice of 650 colours for cassette and frame – at no extra cost - brackets / mounting feet included - housing height only 144 mm - max. width 12 metres - single units up to 6 metres wide; wider only as coupled systems (on request) - large choice of fabrics Precise fabric guidance in the side rails thanks to the zip system. Standard spacer height = 10.5 cm (also available in 15 and 20 cm heights at extra cost)

• up to 550 × 300 cm
• crank, motor, radio or solar
• optional Duomatic: tilt up to 55° by crank

• up to 550 × 300 cm
• motor, radio or solar
• 14 cm high cassette

• up to 550 × 300 cm
• crank, motor, radio or solar
• 13 cm flat cassette

• up to 700 × 400 cm
• crank, motor, radio or solar
• no visible screw fittings, optional Duomatic

• up to 700 × 400 cm
• crank, motor, radio or solar
• also with crossed arms or vario valance

Buy the extremely sturdy Reflexa® drop-arm awning in our shop. The sturdy drop arms provide stability, and the internal springs ensure optimum fabric tension. This allows a maximum width of 500 cm and a maximum extension of 150 cm. The standard extension angle is 90 degrees. For an angle of up to 120 degrees (surcharge), the fabric is made longer. Three different projections are available: 100 cm, 125 cm and 150 cm. The fabric selection is available in the configuration. Reflexa® fabric collection, 295 g/m², lightfast, Teflon-coated, high quality. Wall, ceiling and recess fitting (recess brackets at extra cost) is very quick: the awning is simply hooked onto brackets already fixed on site. All RAL frame colours at no extra charge, including white, silver, brown, anthracite, DB 703 etc. Supplied without valance as standard; a valance is available at extra cost. Choice of crank or motor drive. A rain canopy is available as an option; it is supplied with side caps and approx. 5 cm wider than the awning width. Free delivery within Germany with a Reflexa® works vehicle. Ceiling and wall brackets included, but without fixing screws into the building structure. Intermediate sizes are charged at the next higher table price, with no surcharge. Can be made accurate to the millimetre. All prices are delivered prices for self-installation, i.e. free delivery within Germany. Configure your new drop-arm awning in our shop and order with free shipping. Delivery to the EU and Switzerland is possible at extra cost.

The Reflexa® FenMA window awning with cable guide or guide rails is an unobtrusive, functional sun protection solution for vertical façades and medium-sized windows. Configure it online here in our shop and buy. It not only provides effective privacy and sun protection but also adds attractive splashes of colour to the façade. When the cover is retracted, the entire window area is clear, so even in poor, dull weather you can make full use of the daylight. Depending on the fabric chosen, the extended vertical awning still gives you a good view outside. Indoors, it creates pleasant lighting effects and a comfortable atmosphere. Available with a square or round cassette. Vertical sun protection for many applications. The key technical features of the FenMA S90 E + R and F90 E + R window awning: - very compact dimensions - slim cassette size 110 mm deep and only 90 mm high - available with cable guide or rail guide - with round cassette type R crank operation only, type E = square cassette also available with motor - cassette, brackets and rails can be ordered in any RAL colour at no extra cost - crank and motor drive are the same price - crank operation from inside or outside possible A wide choice of types and 2 different box shapes: semicircular type R or square type E. Side guide with cable or rail possible. Rail dimensions 35 mm wide x 50 mm deep. Please allow for the crank projection with crank operation. Configure your made-to-measure vertical window awnings with cable guide or rail guide in our shop. All prices include VAT. Delivery to Switzerland and Austria, as well as selected EU countries, is possible.

• up to 700 × 350 cm
• crank, motor, radio or solar
• optional vario valance up to 600 cm wide

The versatile Reflexa® Life conservatory awning, made to measure up to 1200 cm wide and 600 cm projection – configure and buy online. An ideal roof-mounted awning for conservatory shading, providing sun and heat protection. The Reflexa® LIFE conservatory awning stands out above all for its good value for money, high functionality and ease of fitting. The fabric is tensioned by a strap counter-tension system. The tension can easily be readjusted if required. Standard cover made of high-strength, rot-proof original awning fabric, spun-dyed, Teflon-coated, 295 grams per square metre, Reflexa® collection. Alternatively, all special collections ALL-WEATHER, LUMERA, GROOVE are available at extra cost. Soltis 92 on request (only up to 400 cm wide and 400 cm projection per bay) The fabric collection is available in the configurator. Key data: - cassette size 20.2 cm wide x 17.4 cm high - installed height = at least 18.9 cm - guide rails with rain drainage channel - fitting dimension from outer edge of cassette to centre of mounting foot = 3.2 cm - mounting foot dimensions = 4.5 cm wide x 9.4 cm long (fixed via slotted holes) - standard mounting foot height = 12 cm - all screw fixings in stainless steel - SOMFY or ELERO motor drive as standard - radio-controlled motor, wind sensor etc. available at extra cost - motors and controls are supplied by the manufacturer SOMFY or ELERO - very modern design - from 401 cm projection, a horizontal wind load support is fitted under the fabric (prevents the fabric from sagging) - competitive price, clean, high-quality workmanship from the German manufacturer Reflexa® - systems up to 1200 cm can be ordered (coupled from 601 cm, always with 2 drives) - awning covers sewn with special TENARA® thread (highest tear resistance) - The frame is offered in any RAL colour at no extra charge. Choose from 600 colours, exclusively from Reflexa. Number of spacers: - up to 250 cm projection = 2 spacers per side - up to 500 cm projection = 3 spacers per side - up to 600 cm projection = 4 spacers per side The cassette side caps and the guide rail end caps are available in 7 different colours (see configuration) Measuring guide for a coupled system: From a width of 601 cm, this awning is supplied as a coupled system. At the coupling point = guide as a double rail. Coupling dimension measured in cm from the drive side, viewed from outside looking at the conservatory (house wall). For a coupled version, please state the overall width from outer edge to outer edge of the conservatory (overall centre-to-centre dimension is overall width - 64 mm) and the coupling dimension (from the outer edge of the conservatory to the fixing dimension at the centre of the beam at the coupling point), in each case viewed from the drive side. Conservatory awnings ensure an ideal room climate in the conservatory. We offer various conservatory awnings that can be mounted on top of the roof or under the roof. You can easily order conservatory shading from us online. Our configurator helps you with the ordering process. Coupled systems are possible up to an overall width of 12 metres. Configure your conservatory awning and see a competitive online awning price. For interior shading of a conservatory as an under-roof awning, choose the LifeSmall conservatory awning For shading a conservatory with adjustable guide rails for special shapes or sloping shading, choose the LifeFlex conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

The adaptable LifeFlex conservatory awning for fitting on domed roofs or special shapes up to 600 cm wide and 500 cm projection – buy online in our shop configurator. This conservatory awning was developed specifically for special shapes in conservatories. The REFLEXA® LifeFlex can be fitted in many ways because the guide rails can be adjusted sideways. This means the fitting surface is no longer rigidly fixed; fitting can also be asymmetrical on existing beams. The patented tensioning system works independently of the drive system. The hem of the awning cover is double-stitched at the sides for reinforcement. In addition to the lateral adjustability, the overhang at the front can be up to 100 cm. The frame is offered in any RAL colour at no extra charge. Choose from 600 colours. Standard cover made of high-strength, rot-proof original awning fabric, spun-dyed, Teflon-coated, 295 grams per square metre, Reflexa® collection. Alternatively, all special collections ALL-WEATHER (max. 350 cm projection), LUMERA, PERFORA, Tempoteststar etc. are available at extra cost. Soltis 92 (only up to 500 cm wide) A high-quality SOMFY or ELERO motor is fitted as standard. We therefore need the following details for your order: - overall box width as per sketch - overall projection as per sketch (the front profile of the awning ends approx. 10 cm before the end of the rail) - rail fixing dimension = centre-to-centre dimension, centre of rail to centre of rail (minimum = half the box width) - the distances to the guide rails on the right and left may differ. The preset rail fixing dimension can be shifted on site. Maximum box width is 600 cm Side view details and number of spacers Standard spacers with slotted holes for flexible fitting included (see picture above). Taller spacers can be selected in the configurator (see picture below). Roof-mounted awning design with the option of fitting the guide rails offset. Configure the fully protected LifeFlex awning online here in our awning shop. Designed specifically for domed roofs or sloping conservatories. Always with a high-quality Somfy motor drive, electrically operated. Asymmetrical roofs are no problem for this special awning – the adjustable rail fixing makes it possible. Interior shading of a conservatory as an under-roof awning, choose the LifeSmall conservatory awning For exterior shading of a conservatory, choose the Life conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

With the Bella Lamella louvred roof from Reflexa®, your patio becomes a place you can use all year round – even in winter. The sturdy aluminium frame carries rotating louvres: closed, they keep out rain, wind and snow; open, they let in light and fresh air. The louvres open up to 110°, and the motor lets you set them exactly as you need shade and brightness. Made to your measurements 1-bay system from 200 to 400 cm wide, 2-bay system from 400 to 800 cm, 3-bay system from 600 to 1,200 cm Projection 200 to 600 cm, system height up to 300 cm Snow and support load up to 112 kg/m² (largest system, louvres closed), wind resistance class 6 Free-standing or on the house wall Free-standing, the roof stands on posts with base plates. On the house wall it is fixed with wall consoles or wall brackets – at the back, front, side or around a corner; posts are then omitted on the wall side. Rainwater drains through the built-in gutters and is led down through the post profile. Operation and equipment Electric drive as standard, wired with 5 m cable bidirectional radio 868 (Combio 868) or io (Pergola Slim Receiver io) on request, with matching hand transmitters LED strip on two or four sides and LED spots in the louvres for atmospheric evenings S1 patio heaters, also with dimmer module, for cooler days additional posts along the longitudinal beam Colours Eight standard colours in matt fine texture: traffic white (RAL 9016), white aluminium (RAL 9006), grey aluminium (RAL 9007), anthracite grey (RAL 7016), slate grey (RAL 7015), micaceous iron anthracite (DB 703), grey brown (RAL 8019) and moss green (RAL 6005). The fine texture is more resistant to scratches and abrasion than gloss or smooth matt finishes – an advantage on large surfaces in particular. Tip on orientation When planning, consider which direction the roof faces and at what time of day you want to use the space. If the sun comes from the front when the louvres open, it shines directly underneath; if it comes from behind, you only get indirect light. For wall mounting, this decides whether the louvres run parallel or at right angles to the wall. We are happy to advise you.

Another vertical awning for wall fitting, particularly suitable for fitting under a roof, available from us. As there is no cassette, it can be made in one piece up to 500 cm wide x 300 cm high. With motor or crank drive. The brackets and drop bar can be ordered in any RAL colour at no extra cost. The tension cable is fixed backwards with a tensioning bracket or downwards with a tensioning block. Simple technology and great practical value are what set this vertical awning apart. Order width = outer edge of bracket to outer edge of bracket. Order height = top edge of bracket to bottom edge of the awning drop bar.

Configure the Viladora pergola awning made to measure and buy it easily in our shop. Max. width 600 cm and max. height / projection 600 cm. This new development from Reflexa® impresses with its simplicity on the one hand and a very high quality standard on the other. The frame is available in 7 frame colours at no extra cost. A SOMFY electric motor is part of the standard version. The scope of delivery is as follows: - awning cover from the entire high-quality acrylic fabric collection - fabric seams sewn with Tenara thread are standard on all REFLEXA® awnings - radio-controlled motor version with SOMFY hand transmitter and receiver - standard frame colours: brown RAL 8019, anthracite RAL 7016, silver RAL 9006, natural white RAL 9010, traffic white RAL 9016, anthracite metallic DB 703 or dark brown shade 8077; any other RAL colour at no extra cost - roof posts 3 metres long (can be shortened) - 2 wall brackets for the cassette - 2 floor mounting plates The centre distance of the support posts at the floor (see picture) is = minus 47 mm per side. A sectional drawing of the Viladora. A wind load support is fitted as standard from a width of 401 cm or a projection of 301 cm. Also available with the vertical zip awning type FenMa Zip, mounted directly on the support profiles. The ideal interior shading for a conservatory is the under-glass awning Life Small from Reflexa. For external conservatory shading, choose the conservatory awning Life For conservatory shading with variable guide rails for special shapes or sloping shading, choose the conservatory awning LifeFlex

Side privacy and sun protection for balconies and terraces The Reflexa® wall-mounted folding screen is fixed to the house wall and opens like a fan. It shades from the side and blocks views, even where there is no room for an awning. When you don't need it, fold it up and it lies flat against the wall. The two-part bracket is fixed to the wall with four screws. A side bracket for recess mounting is available at extra cost. The handle is on the right as standard and can be moved to the left. Supplied Folding screen, bracket in RAL 9010, 8022 or 9006, zipped protective cover in white, beige or grey for the cold season, awning fabric from the plain collection, operating instructions. Fixing material is not included, as it depends on the wall. Height and projection: 100 to 225 cm, projection angle 90°. From 200 cm height the fabric panels have a horizontal seam. Every screen is made to measure.