Solar control films

Low-E film for summer and winter – with more solar control XE 50 combines solar control in summer with a low-E effect in winter: its coating returns part of the room's heat to the room. Compared with XE 70 it is darker and blocks more solar heat. Note from the data sheet: under artificial light an iridescent effect (“oil film”) may be visible on the glass. It is fitted on the inside. The film is supplied cut to your size (width × height); roll width: 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 51 % on 4 mm single glazing, 47 % on 4/12/4 mm double glazing g-value (total solar energy transmittance): 0.42 on 4 mm single glazing, 0.49 on 4/12/4 mm double glazing Total solar energy rejected (90°): 58 % on 4 mm single glazing, 51 % on 4/12/4 mm double glazing Low-E: emissivity 0.37; Ug-value 4.4 W/(m² °C) on 4 mm single glazing, 2.4 W/(m² °C) on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 54 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 15 years

All-year film: less heat in summer, less heat loss in winter XE 70 is a low-E film for the room side. In summer it reduces incoming solar heat; in winter its coating reflects part of the room's heat back and so lowers heat loss through the glass. It is very light and shows little reflection on the inside. It is a multi-layer polyester film with a scratch-resistant surface. The film is supplied cut to your size (width × height); roll width: 148 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 68 % on 4 mm single glazing, 62 % on 4/12/4 mm double glazing g-value (total solar energy transmittance): 0.49 on 4 mm single glazing, 0.52 on 4/12/4 mm double glazing Total solar energy rejected (90°): 51 % on 4 mm single glazing, 48 % on 4/12/4 mm double glazing Low-E: emissivity 0.09; Ug-value 3.4 W/(m² °C) on 4 mm single glazing, 2.1 W/(m² °C) on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 52 % on 4 mm single glazing Thickness: 75 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 15 years

Dark dual-reflective film with little reflection on the inside True Vue 15 noticeably darkens the room and reduces glare and heat. It is strongly reflective on the outside (depending on the lighting) and much less so inside. The tint is neutral grey. It is a multi-layer metallised film with a scratch-resistant surface, fitted on the room side. The film is supplied cut to your size (width × height); roll widths: 183 and 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 12 % on 4 mm single glazing, 11 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 45/23 % on 4 mm single glazing g-value (total solar energy transmittance): 0.19 on 4 mm single glazing, 0.32 on 4/12/4 mm double glazing Total solar energy rejected (90°): 81 % on 4 mm single glazing, 68 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 88 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Medium darkening with low reflection on the room side True Vue 30 is the middle grade of the range: it noticeably reduces heat and glare and lets in roughly a third of the light. It reflects on the outside depending on the light, and only slightly inside. Neutral grey tint; multi-layer metallised film with a scratch-resistant surface, fitted on the inside. The film is supplied cut to your size (width × height); roll widths: 183 and 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 31 % on 4 mm single glazing, 29 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 22/13 % on 4 mm single glazing g-value (total solar energy transmittance): 0.37 on 4 mm single glazing, 0.46 on 4/12/4 mm double glazing Total solar energy rejected (90°): 63 % on 4 mm single glazing, 52 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 73 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Light dual-reflective film with subtle darkening True Vue 40 is the lightest film in the True Vue range. It takes away part of the sun's heat, darkens only subtly and keeps the neutral grey tint. It is a multi-layer metallised film with a scratch-resistant surface, fitted on the room side. The film is supplied cut to your size (width × height); roll widths: 183 and 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 39 % on 4 mm single glazing, 36 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 14/10 % on 4 mm single glazing g-value (total solar energy transmittance): 0.46 on 4 mm single glazing, 0.55 on 4/12/4 mm double glazing Total solar energy rejected (90°): 54 % on 4 mm single glazing, 45 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 67 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Very dark solar film – mirror outside, hardly any reflection inside True Vue 5 darkens strongly and clearly reduces glare and solar heat. What makes it special: it is highly reflective on the outside (depending on the light) but only minimally on the room side, so looking out stays more comfortable even at dusk. Neutral grey tint, multi-layer metallised film with a scratch-resistant surface, fitted on the inside. The film is supplied cut to your size (width × height); roll widths: 183 and 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 5 % on 4 mm single glazing, 5 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 45/8 % on 4 mm single glazing g-value (total solar energy transmittance): 0.16 on 4 mm single glazing, 0.31 on 4/12/4 mm double glazing Total solar energy rejected (90°): 84 % on 4 mm single glazing, 69 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 94 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Strong heat control from the outside – with a pronounced mirror effect AX Plus 20 is applied to the outside of the pane, so a large share of the sun's heat is stopped before it reaches the glass. Its silver surface is highly reflective: during the day you can see out clearly while the view in from outside is largely blocked – how much depends on the lighting. It is made of two layers of polyester with sputtered aluminium and a scratch-resistant top coat. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 16 % on 4 mm single glazing, 15 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 61/58 % on 4 mm single glazing g-value (total solar energy transmittance): 0.18 on 4 mm single glazing, 0.14 on 4/12/4 mm double glazing Total solar energy rejected (90°): 82 % on 4 mm single glazing, 86 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 85 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Exterior heat control with a medium mirror finish – and more daylight If a room should stay noticeably cooler without becoming too dark, AX Plus 30 strikes a balance between shading and brightness. The film is fitted externally and has a silver mirror finish; the view in from outside is restricted depending on the lighting. It consists of two polyester layers with sputtered aluminium and a scratch-resistant surface. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 34 % on 4 mm single glazing, 31 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 41/37 % on 4 mm single glazing g-value (total solar energy transmittance): 0.33 on 4 mm single glazing, 0.28 on 4/12/4 mm double glazing Total solar energy rejected (90°): 67 % on 4 mm single glazing, 72 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 68 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Light exterior solar film with a subtle mirror finish AX Plus 50 lets about half of the visible light through while still reducing solar heat at the window. The silver reflection is subtle, so the façade looks calmer than with darker grades. The film is fitted externally and consists of two polyester layers with sputtered aluminium plus a scratch-resistant surface. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 48 % on 4 mm single glazing, 44 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 27/25 % on 4 mm single glazing g-value (total solar energy transmittance): 0.44 on 4 mm single glazing, 0.38 on 4/12/4 mm double glazing Total solar energy rejected (90°): 56 % on 4 mm single glazing, 62 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 58 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Lightest exterior film: heat control with almost unchanged daylight According to the manufacturer, AX Plus 80 is the lightest exterior film in its range. Instead of metal, a nano-ceramic coating sits between two polyester layers, so the film hardly reflects and is barely noticeable on the glass. Rooms stay bright while part of the solar heat is kept outside. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 78 % on 4 mm single glazing, 71 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 8/8 % on 4 mm single glazing g-value (total solar energy transmittance): 0.56 on 4 mm single glazing, 0.47 on 4/12/4 mm double glazing Total solar energy rejected (90°): 44 % on 4 mm single glazing, 53 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 35 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Maximum darkening from the outside – hardly any reflection inside AX Plus DS 06 is designed for rooms where glare and heat should be reduced as much as possible. It is highly reflective on the outside (depending on the light) but much less so on the room side, so your own reflection is less of a nuisance in the evening. The tint is neutral grey. It is a two-layer metallised polyester film with a scratch-resistant surface, fitted externally. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 5 % on 4 mm single glazing, 4 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 60/15 % on 4 mm single glazing g-value (total solar energy transmittance): 0.13 on 4 mm single glazing, 0.09 on 4/12/4 mm double glazing Total solar energy rejected (90°): 87 % on 4 mm single glazing, 91 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 95 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Strong darkening from the outside, little reflection on the room side AX Plus DS 15 clearly reduces glare and solar heat but lets in a little more light than DS 06. It is strongly reflective on the outside (depending on the lighting) and much less so inside. The tint is neutral grey. The two-layer metallised polyester film with a scratch-resistant surface is fitted externally. The film is supplied cut to your size (width × height); roll widths: 183, 152 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 14 % on 4 mm single glazing, 13 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 42/17 % on 4 mm single glazing g-value (total solar energy transmittance): 0.23 on 4 mm single glazing, 0.18 on 4/12/4 mm double glazing Total solar energy rejected (90°): 77 % on 4 mm single glazing, 82 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 87 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Dark stainless-steel look with very high heat control AX Plus ES 15 is the darkest stainless-steel film in the Bruxsafol range. It noticeably darkens the room, reduces glare and keeps a lot of solar heat out. The surface is reflective; how much can be seen from outside depends on the lighting. Two polyester layers with sputtered stainless steel and a scratch-resistant layer make up the film, which is fitted externally. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 13 % on 4 mm single glazing, 12 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 40/36 % on 4 mm single glazing g-value (total solar energy transmittance): 0.25 on 4 mm single glazing, 0.18 on 4/12/4 mm double glazing Total solar energy rejected (90°): 75 % on 4 mm single glazing, 82 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 89 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Stainless-steel look for noticeably less heat at the window AX Plus ES 25 sits in the middle of the stainless-steel range: it clearly reduces heat and glare but lets in more light than ES 15. From outside it shows a reflective stainless-steel look. It is made of two polyester layers with sputtered stainless steel and a scratch-resistant surface, fitted externally. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 24 % on 4 mm single glazing, 22 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 28/25 % on 4 mm single glazing g-value (total solar energy transmittance): 0.35 on 4 mm single glazing, 0.27 on 4/12/4 mm double glazing Total solar energy rejected (90°): 65 % on 4 mm single glazing, 73 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 81 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Light stainless-steel film with a very subtle reflection AX Plus ES 40 is the lightest grade in the stainless-steel range. It takes away part of the sun's heat but reflects only modestly, letting comparatively plenty of daylight into the room. It consists of two polyester layers with sputtered stainless steel and a scratch-resistant surface, fitted on the outside. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 39 % on 4 mm single glazing, 35 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 18/15 % on 4 mm single glazing g-value (total solar energy transmittance): 0.47 on 4 mm single glazing, 0.39 on 4/12/4 mm double glazing Total solar energy rejected (90°): 53 % on 4 mm single glazing, 61 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 69 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Barely visible heat control for the outside of the glass AX Plus N 75 is intended for windows whose appearance should change as little as possible: it hardly reflects and lets plenty of daylight through, yet still reduces incoming solar heat. The film consists of two multi-sputtered polyester layers with a scratch-resistant surface and is fitted externally. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 71 % on 4 mm single glazing, 64 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 8/8 % on 4 mm single glazing g-value (total solar energy transmittance): 0.45 on 4 mm single glazing, 0.39 on 4/12/4 mm double glazing Total solar energy rejected (90°): 55 % on 4 mm single glazing, 61 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 48 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Strong exterior heat control in a warm bronze tone AX Plus SB 20 combines strong solar control with a bronze tone that many people find more pleasant than cool silver. It is highly reflective; depending on the light, the view in from outside is greatly reduced. It consists of two polyester layers with sputtered copper and a scratch-resistant surface, fitted on the outside. The film is supplied cut to your size (width × height); roll widths: 183, 152 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 24 % on 4 mm single glazing, 22 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 40/37 % on 4 mm single glazing g-value (total solar energy transmittance): 0.20 on 4 mm single glazing, 0.16 on 4/12/4 mm double glazing Total solar energy rejected (90°): 80 % on 4 mm single glazing, 84 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 84 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years for vertical and 5 years for sloped installation – with all edges sealed

Solar film for plastic glazing such as polycarbonate and multiwall sheets AX Poly 15 is designed specifically for plastic glazing, such as polycarbonate panes or twin-wall sheets. It keeps out a lot of heat and is highly reflective. Important according to the data sheet: because of the strong reflection, apply it only to flat surfaces – even a slight curve can cause a burning-glass effect; the manufacturer does not recommend it for roller doors. It is fitted externally. The film is supplied cut to your size (width × height); roll widths: 183 and 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 14 % on 4 mm single glazing Visible light reflection outside/inside: 65/64 % on 4 mm single glazing g-value (total solar energy transmittance): 0.17 on 4 mm single glazing Total solar energy rejected (90°): 83 % on 4 mm single glazing UV protection (300–380 nm): over 99 %; fading protection 84 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 3 years for both vertical and sloped installation – with all edges sealed

Dark polyurethane film for plastic and curved glazing AX-PU 15 is made of highly transparent polyurethane with strongly absorbing particles. It hardly reflects, which keeps the burning-glass effect of reflective films low, and it is flexible – suitable, for example, for plastic roller doors or curved panes. The surface is self-healing and the adhesive is matched to plastics. According to the data sheet, because of its high absorption it may only be fitted to plastic glazing and toughened glass (e.g. ESG); it is applied externally. The film is supplied cut to your size (width × height); roll width: 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 15 % on 4 mm single glazing Visible light reflection outside/inside: 8/8 % on 4 mm single glazing g-value (total solar energy transmittance): 0.25 on 4 mm single glazing Total solar energy rejected (90°): 75 % on 4 mm single glazing UV protection (300–380 nm): over 99 %; fading protection 87 % on 4 mm single glazing Thickness: 190 µm Manufacturer's warranty: 5 years for vertical and 3 years for sloped installation

Light polyurethane film for plastic and curved glazing AX-PU 72 is the light counterpart to AX-PU 15: highly transparent polyurethane with absorbing particles, hardly reflective and flexible. This makes it suitable for plastic panes, roller doors or curved surfaces where as much light as possible should be kept. Self-healing surface, adhesive designed for plastics. According to the data sheet it may only be fitted to plastic glazing and toughened glass (e.g. ESG); it is applied externally. The film is supplied cut to your size (width × height); roll width: 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 74 % on 4 mm single glazing Visible light reflection outside/inside: 9/9 % on 4 mm single glazing g-value (total solar energy transmittance): 0.50 on 4 mm single glazing Total solar energy rejected (90°): 50 % on 4 mm single glazing UV protection (300–380 nm): over 99 %; fading protection 40 % on 4 mm single glazing Thickness: 186 µm Manufacturer's warranty: 5 years for vertical and 3 years for sloped installation

Maximum heat control from inside with a strong silver mirror finish Film 101 is applied to the room side of the glass – ideal when the outside is hard to reach. It keeps out a lot of solar heat and has a silver mirror finish; during the day the view in from outside is greatly restricted, depending on the light. It consists of two polyester layers with sputtered aluminium and a scratch-resistant surface. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 16 % on 4 mm single glazing, 15 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 58/58 % on 4 mm single glazing g-value (total solar energy transmittance): 0.20 on 4 mm single glazing, 0.30 on 4/12/4 mm double glazing Total solar energy rejected (90°): 80 % on 4 mm single glazing, 70 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 84 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Silver solar film for inside – cooler, but not too dark Film 102 is the lighter counterpart to 101: it clearly reduces solar heat while letting noticeably more light into the room. From outside it shows a silver reflection; how much can be seen in depends on the lighting. It is fitted on the inside and consists of two polyester layers with sputtered aluminium and a scratch-resistant surface. The film is supplied cut to your size (width × height); roll widths: 183, 152, 122 and 91 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 34 % on 4 mm single glazing, 32 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 38/36 % on 4 mm single glazing g-value (total solar energy transmittance): 0.35 on 4 mm single glazing, 0.43 on 4/12/4 mm double glazing Total solar energy rejected (90°): 65 % on 4 mm single glazing, 57 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 67 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years

Strong glare control and privacy from inside: grey, silver, grey Film 301 has three layers: a middle layer with sputtered aluminium between two grey layers. The result is a very dark film that strongly reduces glare, cuts solar heat and – depending on the light – allows hardly any view in from outside during the day. It is fitted on the inside and has a scratch-resistant surface. The film is supplied cut to your size (width × height); roll width: 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 5 % on 4 mm single glazing, 5 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 10/10 % on 4 mm single glazing g-value (total solar energy transmittance): 0.26 on 4 mm single glazing, 0.44 on 4/12/4 mm double glazing Total solar energy rejected (90°): 74 % on 4 mm single glazing, 56 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 94 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 5 years

Bronze solar film for inside – warm and bright SB 165 clearly reduces solar heat while still letting in a good third of the light. Its bronze tone feels warmer than silver. From outside it reflects, depending on the lighting. It consists of two polyester layers with sputtered copper and a scratch-resistant surface, fitted on the room side. The film is supplied cut to your size (width × height); roll width: 152 cm. Before you order, please check that the film suits your glazing – the guide and the data sheet below explain what to look for. Visible light transmission (VLT): 35 % on 4 mm single glazing, 32 % on 4/12/4 mm double glazing Visible light reflection outside/inside: 29/27 % on 4 mm single glazing g-value (total solar energy transmittance): 0.30 on 4 mm single glazing, 0.39 on 4/12/4 mm double glazing Total solar energy rejected (90°): 70 % on 4 mm single glazing, 61 % on 4/12/4 mm double glazing UV protection (300–380 nm): over 99 %; fading protection 75 % on 4 mm single glazing Thickness: 50 µm; fire classification B/s1/d0 to EN 13501-1 Manufacturer's warranty: 10 years