Made-to-measure sun protection
Reflexa® Asyflex 80 NF self-supporting made to measure
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert- Width up to 270 cm, height up to 390 cm
Configurator
Reflexa® Asyflex 80 NF self-supporting in 3 steps
Choose step by step. The price updates with every change, and you can change completed steps at any time.
Product description
Self-supporting sloping external venetian blinds are particularly suitable for fitting to glass façades and low-energy houses. Sophisticated shading for special fitting situations.
This type of shading is needed where the building does not allow fitting directly to the façade or window frame. The complete construction consists of the sloping external venetian blind, guide rails and pelmet. An electric motor drives the blind and controls the tilting of the slats. The bottom rail is a telescopic rail that automatically shortens and lengthens as the blind moves up and down, depending on the angle required. This blind is only available with guide rails. Double, reinforced guide rail brackets hold the complete system and the factory-fitted U-shaped pelmet.
Details and features:
- fitted with 80 mm nipple-guided flat slats, available in many colours
- available with an inclination of up to 45 degrees (full list at the end of this page)
- ELERO 230 V motor as standard
- radio control possible
- U-shaped square box pelmet to cover the slat stack included as standard (round version on request)
- side caps for the pelmet included as standard
- fully pre-assembled and ready to fit
- double guide rail brackets in various sizes
- guide rails, pelmet, bottom rail and spacers available in any colour at no extra cost
- guide rails available in round or square design
- guide rails always inside the pelmet
Horizontal and vertical sectional drawings are provided below to help you with measuring. If you need technical support, please send us photos at: shop(at)sonnenschutzshop24.eu
Please refer to the technical drawings for the measuring guidelines.
All available slat colours for the Asyflex 80 NF self-supporting.
Stack sizes and pelmet sizes – finished sizes with rail guidance: (parallel to the slope)
80 mm slats up to 120 cm blind height = 16 cm / 19 cm
80 mm slats up to 140 cm blind height = 17 cm / 20 cm
80 mm slats up to 160 cm blind height = 19 cm / 22 cm
80 mm slats up to 180 cm blind height = 20 cm / 23 cm
80 mm slats up to 200 cm blind height = 20 cm / 23 cm
80 mm slats up to 220 cm blind height = 21 cm / 24 cm
80 mm slats up to 240 cm blind height = 23 cm / 26 cm
80 mm slats up to 260 cm blind height = 24 cm / 27 cm
80 mm slats up to 280 cm blind height = 26 cm / 30 cm
80 mm slats up to 300 cm blind height = 27 cm / 30 cm
80 mm slats up to 320 cm blind height = 28 cm / 31 cm
80 mm slats up to 340 cm blind height = 29 cm / 32 cm
80 mm slats up to 360 cm blind height = 31 cm / 34 cm
80 mm slats up to 390 cm blind height = 33 cm / 36 cm
Stack sizes and pelmet sizes with stainless steel rod guidance. (parallel to the slope)
80 mm slats up to 120 cm blind height = 15 cm / 18 cm
80 mm slats up to 140 cm blind height = 16 cm / 19 cm
80 mm slats up to 160 cm blind height = 17 cm / 20 cm
80 mm slats up to 180 cm blind height = 18 cm / 21 cm
80 mm slats up to 200 cm blind height = 19 cm / 22 cm
80 mm slats up to 220 cm blind height = 19 cm / 22 cm
80 mm slats up to 240 cm blind height = 20 cm / 23 cm
80 mm slats up to 260 cm blind height = 21 cm / 24 cm
80 mm slats up to 280 cm blind height = 22 cm / 25 cm
80 mm slats up to 300 cm blind height = 23 cm / 26 cm
80 mm slats up to 320 cm blind height = 24 cm / 27 cm
80 mm slats up to 340 cm blind height = 25 cm / 28 cm
80 mm slats up to 360 cm blind height = 26 cm / 29 cm
80 mm slats up to 390 cm blind height = 28 cm / 31 cm
Manufacturing limits for sloping external venetian blinds:
up to 190 cm width = up to 45 degrees inclination
up to 200 cm width = up to 44 degrees inclination
up to 210 cm width = up to 41 degrees inclination
up to 220 cm width = up to 37 degrees inclination
up to 230 cm width = up to 34 degrees inclination
up to 240 cm width = up to 30 degrees inclination
up to 250 cm width = up to 25 degrees inclination
up to 260 cm width = up to 19 degrees inclination
up to 270 cm width = up to 12 degrees inclination (only with rail guidance and 80 mm slats)
Technology & fitting
Key data from the configurator
- Sizes
- Width up to 270 cm · height up to 390 cm
- Delivery time
- 3-5 weeks
Instructions & downloads
Advice
Personal expert advice
Not sure about size, fabric or fitting? Call us or let us check your configuration before production.
+49 9732 3023858Mon–Thu 9 am–4 pm, Fri 9 am–2 pm
Have my configuration checkedWhat customers say
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Overall rating of our shop on ProvenExpert. As of 18.10.2026
All reviews on ProvenExpert