Skip to main content Skip to search Skip to main navigation
Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Roller doors · made to measure

Roller doors up to 265 cm wide

The HRT05 roller door is designed for smaller garages: up to 265 cm wide and 273 cm high, measured at the outer edges. It uses Heroal’s 52 mm aluminium profile and is assembled by Reflexa. Because the curtain weighs under 20 kg up to 250 × 250 cm, the door needs no fall protection.

The box measures 21 × 21 cm and is bevelled at the front or semi-circular, at no extra cost. In this size, the carport roller shutter with HSM 52 profile can also be used as a door.

  • Made to the millimetre
  • Free shipping within Germany (except islands)
  • Instant price in the configurator
Roller doors up to 265 cm wide 4,83★★★★★
282 reviews

Subcategories

Our models

Filter products
Carport roller shutter up to 400 cm wide, HSM52 profile
Carport roller shutter up to 400 cm wide, HSM52 profile

Buy an electric carport roller shutter or small roller door up to 400 cm wide for retrofitting in our configurator. Can be used as a carport roller door with a curtain weight of up to 20 kg. Available as Creato (round box) or Conturo (bevelled box). System supplier HEROAL®, made up by Reflexa®. Elero® motors with electronic limit switching as standard. Aluminium profile as standard. Wide choice of colours. Tested and certified roller shutters. You can use these roller shutters for indoor or outdoor fitting – also for patio doors and large window fronts. Advantages and features at a glance: - German Elero® RolTop D+ motors (electronic limit setting), no need to set the end positions - alternatively equivalent Somfy motors, depending on stock availability - also available with battery solar drive (including radio remote control and solar panel) - also available with crank drive (with removable crank) - made in Germany - hail impact tested, foam-filled aluminium curtain 52 mm high x 13.5 mm to DIN (MAXI profile) - Energy Label - larger possible sizes (up to 400 cm wide at 220 cm height, or 220 cm wide and 350 cm high) - integrated anti-lift protection through fixed shaft connectors - extruded bottom rails with rubber seal - 5-sided Conturo R box (bevelled at the front) or Creato R half-round box at no extra charge - sturdy CL 53 guide rails = 53 mm wide x 22 mm deep (piping insert for noise reduction) - optionally CL 68 rail type at no extra charge = 68 mm wide x 26.5 mm deep (greater curtain insertion depth) - box roll-formed as standard, extruded on request - box height always 20.5 cm - 60 mm octagonal steel shaft with bearing-mounted aluminium end cap - all RAL box and rail colours can be ordered at no extra charge - up to 265 cm wide x 273 cm high also usable as a roller door, as the curtain weight is below 20 kg - no fixings for the building structure are included in the delivery According to Reflexa, its roller shutters are made in Germany. The HEROAL® HSM 52 aluminium profile is filled with high-quality foam and has a face of 52 mm x 13.5 mm (measured without locking) The following curtain colours are available: This product is made to measure to your specifications and cannot be returned or exchanged. The order sizes are always the overall dimensions. Outer edge of guide rail to outer edge of guide rail = order width Top edge of box to bottom edge of bottom rail = order height The guide rails are 53 mm or 68 mm wide per side. The box height is always 20.5 cm

Regular price: From €320.91
Roller door HRT05 without fall arrest device
Roller door HRT05 without fall arrest device

Configure the aluminium roller door HRT05 and buy it made to measure online. Certified up to 250 cm wide x 250 cm high clear opening. (Tested according to HEROAL® certificate RT05, profile Maxi 52) Roller door LIGHT HRT05 with 52 mm Heroal aluminium profile, assembled by Reflexa in Germany. The certificate is available at the bottom of this page. Max. outer dimensions 265 cm wide x 273 cm high. German PREMIUM equipment in many colours. Box size 21 x 21 cm, bevelled at the front or, alternatively, semi-circular at no extra charge. (Picture of the door shows fitting variant 2 = behind the opening, box facing inwards. The rear box panel and guide rails are not visible from outside; the convex side of the curtain faces outwards.) All the important details of the HRT05 roller door These roller doors come as standard with a robust, high-quality integrated mechanical 230 V elero® tubular motor. No fall arrest device is needed because the curtain weighs less than 20 kg, in line with HEROAL® certificate RT05 (available as a PDF at the bottom of the page). They can optionally be operated by BECK-O-TRONIC® radio control or by a switch only. Other circuits, such as yard lighting, can also be connected to the BECK-O-TRONIC®. The BECK-O-TRONIC® has an additional manual switch function. (The description is also available as a PDF at the bottom of the page.) The LIGHT HRT05 has a 1 cm hard rubber seal on the extruded bottom profile. Certificate RT05 (see link at the very bottom), together with the associated DIN standards for doors, is met because the curtain weight does not exceed 20 kg up to a size of 250 x 250 cm. A fall arrest device is therefore not required. The foam-filled aluminium curtain (face = 52 mm high x 13.5 mm thick to DIN) is fitted like a conventional roller shutter in, behind or in front of the reveal opening. We are happy to send you fitting notes for this roller door on request. The 21 cm high x 21 cm wide box (bevelled at 45 degrees at the front) is attractive and blends in with any façade. The keder-guided rails measure 28 mm deep and 68 mm wide and allow the curtain to run almost silently. These doors are supplied pre-assembled with the curtain rolled in. Screws for fixing to the building are not included. Roller door order sizes: drive side always viewed from inside. Top edge of box to bottom edge of bottom rail = order height Outer edge of rail to outer edge of rail = order width Steel springs suspending the curtain inside the box on a sturdy 60 mm steel shaft differ from conventional roller shutter shafts in their greater stability and durability. The bottom slat of the door is finished with a standard rubber lip that compensates for slight unevenness in the floor. Our view: high-quality German Heroal® branded product and an economical option for small garage doors that are easy to install yourself. Suitable for widths up to 265 cm and heights up to 270 cm. Box and rail colour available in any RAL colour at no extra charge. Aluminium slat dimensions: Fitting variants: These roller doors can be fitted in several ways. Summary of winding direction: - if the box faces outwards (left roller), the convex side of the curtain always faces inwards - if the box faces inwards (right roller), the convex side of the curtain always faces outwards Important note on the garage: - the garage must be closed on all sides once the door has been installed (if the garage is open at the back, the increased wind load can push the curtain backwards out of the guide rails) We deliver with our own factory vehicles in secure packaging. ***Restriction: these doors are not suitable as high-speed doors or for operation every minute (supermarkets, loading bays etc.). Every tubular motor has a thermal switch and shuts the system down in the event of overload or overheating.

Regular price: From €864.10

Drive and operation

  • An Elero 230 V tubular motor is built in as standard.
  • It is operated by switch or optionally by BECK-O-TRONIC radio control. Other circuits can also be connected to it, such as the yard light; a manual switching function is built in.
  • Tested to Heroal certificate RT05 up to 250 × 250 cm clear dimensions; the certificate is available as a PDF on the product page.

You put together the HRT05 roller door in the configurator. For wider garages there is the SMART H55 up to 400 cm.

More roller doors