Special shapes

Blackout external venetian blinds, fitted with 90 mm wide S or Z slats, for darkening with guide rails or cable guidance – order in our shop. As early as 30 years ago it was recognised that external venetian blinds can achieve a high blackout effect thanks to a special curvature of the slats, if they are shaped differently from a C-slat. The oldest blackout external venetian blinds are probably the Z-slats, which have a somewhat industrial, angular look. The S-slats are more harmonious and blend in more softly with the façade. Very high heat and light shielding. Properties of S and Z slats as blackout slats: good darkening in the slat area good prices, made in the EU high wind stability thanks to the special curvature Somfy drives for motorised versions crank operation available angled pelmets available large choice of colours reasonable delivery times good workmanship and quality thanks to fully automated production no shipping abroad (German addresses only) These colours are available. The spacers for the guide rails. All stack heights for all 4 slat types. Height = overall blind height including head rail. Blind height for 90 mm S-slats and 90 mm Z-slats with crank operation 60 cm                      135 mm stack      135 mm stack             80 cm                      145 mm                          145 mm 100 cm                    155 mm                          160 mm 120 cm                    170 mm                          170 mm 140 cm                    175 mm                          180 mm 160 cm                    190 mm                          190 mm 180 cm                    200 mm                          205 mm 200 cm                    215 mm                          215 mm 220 cm                    220 mm                          225 mm 240 cm                    235 mm                          235 mm 260 cm                    245 mm                          250 mm 280 cm                    255 mm                          260 mm 300 cm                    265 mm                          270 mm 320 cm                    275 mm                          280 mm 340 cm                    290 mm                          295 mm 360 cm                    300 mm                          305 mm 380 cm                    305 mm                          315 mm For motorised blinds the stack is 20 mm higher. Example calculation: Cover plate height: e.g. for 90 mm S-slats, external venetian blind height with motor = 220 cm = 220 mm plus 20 mm for the motor plus 20 mm recommended overlap = cover plate height 260 mm.

Buy an electric carport roller shutter or small roller door up to 400 cm wide for retrofitting in our configurator. Can be used as a carport roller door with a curtain weight of up to 20 kg. Available as Creato (round box) or Conturo (bevelled box). System supplier HEROAL®, made up by Reflexa®. Elero® motors with electronic limit switching as standard. Aluminium profile as standard. Wide choice of colours. Tested and certified roller shutters. You can use these roller shutters for indoor or outdoor fitting – also for patio doors and large window fronts. Advantages and features at a glance: - German Elero® RolTop D+ motors (electronic limit setting), no need to set the end positions - alternatively equivalent Somfy motors, depending on stock availability - also available with battery solar drive (including radio remote control and solar panel) - also available with crank drive (with removable crank) - made in Germany - hail impact tested, foam-filled aluminium curtain 52 mm high x 13.5 mm to DIN (MAXI profile) - Energy Label - larger possible sizes (up to 400 cm wide at 220 cm height, or 220 cm wide and 350 cm high) - integrated anti-lift protection through fixed shaft connectors - extruded bottom rails with rubber seal - 5-sided Conturo R box (bevelled at the front) or Creato R half-round box at no extra charge - sturdy CL 53 guide rails = 53 mm wide x 22 mm deep (piping insert for noise reduction) - optionally CL 68 rail type at no extra charge = 68 mm wide x 26.5 mm deep (greater curtain insertion depth) - box roll-formed as standard, extruded on request - box height always 20.5 cm - 60 mm octagonal steel shaft with bearing-mounted aluminium end cap - all RAL box and rail colours can be ordered at no extra charge - up to 265 cm wide x 273 cm high also usable as a roller door, as the curtain weight is below 20 kg - no fixings for the building structure are included in the delivery According to Reflexa, its roller shutters are made in Germany. The HEROAL® HSM 52 aluminium profile is filled with high-quality foam and has a face of 52 mm x 13.5 mm (measured without locking) The following curtain colours are available: This product is made to measure to your specifications and cannot be returned or exchanged. The order sizes are always the overall dimensions. Outer edge of guide rail to outer edge of guide rail = order width Top edge of box to bottom edge of bottom rail = order height The guide rails are 53 mm or 68 mm wide per side. The box height is always 20.5 cm

Every Reflexa® combination roller shutter comes with motor drive and is technically identical to the AsyRoll sloping roller shutter. Order online from us, made to measure. Colours, box shapes and slats are matched exactly to the main roller shutter. It is therefore available with a square or round box and a curtain with light slots. It is measured like a single roller shutter. Outer edge of guide rail to outer edge of guide rail = order width When combined with the sloping unit, the two guide rails are fitted back to back. Top edge of box to bottom edge of bottom rail = order height. You can order the sloping roller shutter here: Sloping roller shutter AsyRoll Comfort

Sloping venetian blinds for interiors – an easy way to shade sloping windows with horizontal blinds. As a sloping system (Slope), this horizontal blind can also be used on larger glazed areas. (Slat material is aluminium) At last, incoming light and heat can be controlled properly here too. Head rail 25 x 25 mm. Raising the blind is only possible to a limited extent (see side guide***). The following shapes are currently available (plus mirrored shapes). See configuration! - the pictures / sketches only illustrate the shapes and do not show technical details - the short width at the TOP of types B and C must not be less than 20 cm Slat width 25 mm. Free-hanging version. Lateral tensioning with a plastic cord on the left and right is available at a surcharge. Operating rod length can be chosen freely. Operation as standard by cord pull to raise the blind and by tilt wand to turn the slats. Available colours below: For more colours, see the selection box in the configuration. Summary: We only offer sloping venetian blinds for interiors with aluminium slats. The very slim design allows flexible installation. Configure your new Slope sloping blind for sun protection, privacy and heat protection in our shop and order with free shipping.

These economical ECOsaver external venetian blinds are available with 80 mm beaded slats or 80 mm flat slats. As well as C slats, Z slats and S slats are available on request. Buy online from a wide range. Anyone building a house and looking for external venetian blinds keeps wondering how the enormous price differences come about. Besides brand-related pricing, production location has for some time played a central role in the pricing of external venetian blinds. The same situation has existed for years with roller doors and roller shutters and makes it impossible for consumers to understand the huge price differences. To meet demand, we now also offer economical alternatives of this kind: quality from the Czech Republic. How to measure and order The order sizes of external venetian blinds are always finished sizes of the entire construction. For the width, this means outer edge of guide rail (with rail guide) or outer edge of slat (with cable guide). For the height, the order size is top edge of head rail to bottom edge of bottom rail = order height. For recess fitting, measure the recess and deduct 1–2 cm if you want to screw the blind to the window frame using spacers. If you want to fix the rails directly to the side of the reveal, first check carefully that the measurements at the top, middle and bottom are the same. The narrowest recess measurement is then the order width. For fitting in front of the reveal, please add the side overlaps (5–8 cm recommended). For the height, the stack height must be added. Below are the stack heights with motor drive and 80 mm beaded slats: Stack heights with crank operation are 20 mm smaller. Smallest stack heights possible with the 80 mm flat slat and cable guide: up to 100 cm blind height = 145 mm stack height up to 120 cm blind height = 150 mm up to 140 cm blind height = 155 mm up to 160 cm blind height = 160 mm up to 180 cm blind height = 165 mm up to 200 cm blind height = 170 mm up to 220 cm blind height = 175 mm up to 240 cm blind height = 180 mm up to 260 cm blind height = 185 mm up to 280 cm blind height = 190 mm up to 300 cm blind height = 195 mm up to 320 cm blind height = 200 mm up to 340 cm blind height = 205 mm up to 360 cm blind height = 210 mm up to 380 cm blind height = 215 mm up to 400 cm blind height = 220 mm Stack heights with crank operation are 20 mm smaller. Cover panels are made 25 mm higher than the stack height as standard. Summary of ECOsaver external venetian blind specification: - 80 mm beaded slats or flat slats - max. 400 cm wide x 400 cm high - crank as standard operation, motor at extra cost (SOMFY) - head rail in galvanised sheet steel - bottom rail anodised, other colours at no extra charge - anodised guide rails, other colours at no extra charge - many slat colours (see configurator) - rail guide or cable guide - cannot be delivered to Switzerland Slat colour choice: Delivery to German addresses only. To black out a window with blackout slats, choose blackout external venetian blinds.

With lateral zip fabric guide using a zip system for optimum fabric tension. The fabric is tensioned on all sides. Single units can be made up to 600 cm wide with a 500 cm projection. Configure the Reflexa® LifeSmall Zip in our shop and order online. Also available with a Variovolant on request. Another option for shading a glass roof from below is the more economical standard under-roof awning. Key features: - electric motor as standard (crank drive not possible) - optionally radio-controlled with either a wall transmitter or a hand transmitter - optionally with bidirectional radio (Somfy iO standard) - iO allows integration into a smart home system and operation via the Somfy app - lateral zip guide of the fabric into the guide rail - optionally with D-valance (Variovolant, extendable up to 150 cm by crank) - choice of 650 colours for cassette and frame – at no extra charge - the installation height including cassette is only 16.4 cm The picture shows an under-glass awning with extendable Variovolant. The valance is attached to the front profile. The picture shows the front end profile without Variovolant. The picture shows the zip system connecting the fabric to the rail, viewed from below. Smooth running and precise guidance. The order width is always the centre-to-centre dimension, see measuring help. This corresponds to the centre of the fixing point of the guide rail brackets. The projection is the narrowest installation dimension in the direction in which the fabric extends, minus 2 cm. Advantages of a zip awning: - optimum fabric tension - no light gaps at the sides - can be made specially and exclusively as an under-glass awning with an additional Variovolant This system is also available as a 2-part shading unit.

Buy made-to-measure replacement roller door curtains from system manufacturer Heroal, with free shipping. Here you can order HEROAL replacement curtains for roller doors. We offer 3 different curtain types for different applications. The maximum sizes for each are listed in the configuration. The curtain is delivered with steel suspension springs and pre-locked. The curtain is finished at the bottom with a thin rubber lip on the RS52 and a thick OSE rubber lip on the RD75. Everything is made to measure and ready to install. Largest application size = 550 cm wide by 450 cm high The following colours are available: Or 11 profile colours coated in special RAL colours, at NO extra cost: Simply order your roller door curtain or replacement curtain in our shop, made to measure in a wide choice of colours and curtain types.

Slanted roller blinds are an affordable alternative to pleated blinds or venetian blinds and are ideal for full-surface interior shading of slanted windows. Fabric with or without thermal coating. Mounting on the window frame or into the sloping wall. The continuous fabric provides very effective privacy and heat protection in summer. The fabric is simply attached to the hooks provided. Due to the design the blinds are permanently tensioned, so the rolled-up fabric may need to be secured. New handle profile from 01/2025: aluminium rail with handle and concealed hanging holes on the underside of the aluminium profile. A screw as hanging point is supplied. Blind brackets are included. The maximum width and height are 160 cm each. 1 hole for the triangle type 2 holes for the trapezoid type The basis for calculation is always the pin width / width "C" times the fabric drop "B". All blinds can be ordered to the exact millimetre. Order width "C" is the pin dimension of the blind. Fabric width = approx. 4 cm narrower. The base width is "A" for triangles and "B" for trapezoids, see sketches. Please always add 2 cm to the small effective fabric height D. Blind height "B" for triangles = top edge of blind to bottom edge of fabric. Alternatively, you can simply give us the glass dimensions; we will then add the overlap of 2 cm all around ourselves. These brackets are supplied for wall and ceiling mounting. The following fabrics are available in the configurator: price group 1, up to approx. 80 % darkening (white approx. 50 %), without thermal coating. Privacy only. Or fabrics ofPrice group 2with an aluminium-pearlescent thermal backing, but translucent. Privacy and heat protection. Or fabrics ofPrice group 2with thermal coating and full blackout. The back of these fabrics is coated white (blackout). Only the fabric itself blacks out; the light gaps all around remain due to the design. You can configure triangular and trapezoidal slanted blinds made to measure online and order them. Special-shape blinds provide heat protection, sun protection and privacy.

Order pleated blinds in all shapes and colours from our pleated blind shop, with free shipping. Delivery to Germany, the EU and Switzerland Ceiling brackets (clips) Wall angle brackets Clamp brackets + € 13.50 per pleated blind These blinds are simply fitted onto the window or door frame. All accessories are included. Up to 800 mm width the blind is operated from the high side only; from a base width of 810 mm it is also operated from the low side (see drawing below). Depending on the angle and size, version F 1 or F 2 is applied automatically. The fabric can always be raised all the way to the top. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.

A pleated blind for conservatories, sloping ceilings and horizontal glazing This plafond pleated blind is made for glass surfaces that are sloping or horizontal – in a conservatory as well as under a sloping roof. It is installed tensioned and can be up to 150 cm wide and 400 cm long. There are three ways to operate it: the WG 1 is moved with a handle, the WK with a crank or an electric rod, and the WM runs on a battery motor. It is fixed with a retaining clip or angle bracket. Mounting profiles, mounting brackets and the hand crank or electric rod for the WK are available on request – please mention this under “Notes”. Size: up to 150 cm wide and 400 cm long (finished size); minimum width WK 20 cm, WG 1 30 cm, WM 50 cm Operation: handle (WG 1), crank or electric rod (WK), battery motor (WM) Fitting: retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 790 erfal pleated fabrics

A plafond pleated blind for conservatories with special shapes This tensioned plafond pleated blind is designed for sloping and horizontal glass surfaces in trapezoid, triangular, pentagonal or hexagonal shapes – in conservatories as well as under sloping roofs. Triangles are also available as a fixed version. It is operated by a handle on the top or middle rail, with an operating-rod grip available if you prefer. To measure, you need the width and height of the finished blind and, depending on the shape, the smaller width or smaller height. Please describe a dimensioned sketch under “Notes”. The angles of the slopes must lie within the stated range; every sketch is checked before production. Size: EWG 50–53 up to 150 cm wide (EWG 53 up to 120 cm) and up to 150 or 200 cm long; EWG 54–56 up to 150 cm wide and 400 cm long Fixed: EFW 1/2 up to 180 or 200 cm Operation: handle on the top or middle rail, operating-rod grip available Fitting: “small” retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 686 erfal pleated fabrics, 5 profile colours

Plafond under-roof pleated blinds are a good alternative to typical roof-mounted conservatory shading. This conservatory shading is very easy to fit and very durable. The high-quality Cosiflor rail system adapts to almost any fitting situation. All fitting accessories are supplied. Choice of ceiling brackets or wall adapter angle brackets These blinds are fitted directly under the glass using clips or angle brackets. Particularly recommended for conservatory roofs. They are operated with a sliding rod. This type of shading is practical and good value when you compare external sun protection systems with these pleated blinds. Fitting really is simple, and all accessories are supplied. The fabric is self-tensioned and also has steel cables between the rails, which can be adjusted during fitting. This design always achieves optimum tension across the blind, so the fabric does not sag even over long lengths. All aluminium rails are available in silver-grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown. Here are a few examples of other ways PL11 roof systems can be used:

Special-shape shading as a four-sided pleated blind, tensioned at the sides, for tilt-and-turn windows, doors and conservatory shading Delivery to Germany, the EU and Switzerland. Ceiling bracket Wall angle bracket Clamp bracket + € 21.00 per pleated blind They are operated by a sliding handle in the middle, which allows infinitely variable adjustment of the fabric. As standard, this version is operated from top to bottom. The upper triangle cannot be operated. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.

Order external venetian blinds with 50 mm aluminium slats here – small stack heights, a wide range of uses and many drive options. High-quality Reflexa® external venetian blinds with 50 mm aluminium slats, crank or motor operation, made in Germany and of the latest generation (180 degree tilt). At the bottom of this page (below the colours) you will find detailed technical descriptions and PDFs to print out. Prices for external venetian blinds with 50 mm slats are slightly lower than for the wider, flanged slats. Order in our shop and configure your new external venetian blind. The picture above shows the Reflexa® EMA 50 endless cord blind, which carries out all functions – tilting the slats as well as raising and lowering the blind. During installation the cord is led through the window frame (drill a hole through the frame or wall beforehand) and operated via a deflection pulley (included in the delivery). For endless cord gears and crank drives we always make the gear flush with the head rail. The pictures show the gear protruding. Changing from "flush" to "protruding" is easy during installation. Reflexa® endless cord operation is the best-selling version for 50 mm slats. Endless cord gears are an economical version of the external venetian blind. - 50 mm external venetian blinds are available with endless cord gear, crank drive, motor drive or radio-controlled motor; the manufacturer is always Reflexa. Reflexa® motor operation Crank operation We offer 50 mm slats up to a width of 500 cm (cord pull up to 300 cm width, endless cord gear up to 250 cm, crank and motor up to 500 cm width) and a maximum height of 360 cm. For larger blind sizes, please choose the 60, 80 or 88 mm slats, which are flanged at the sides. For protection against wind and weather, the 50 mm blinds can be made with lateral tensioning using a nylon-coated steel wire. For widths over 200 cm we recommend an additional central guide wire (wind protection). To cover the head rail and the slat stack when the blind is raised, an angle cover plate in a matching RAL colour can be fitted on top. The endless cord gear is durable and maintenance-free. Ladder tapes made of 100% Terylene. Head rail always in natural silver, 57 x 51 mm or 40 x 30 mm depending on the drive type. Bottom rail 51 x 20 mm, coated in a colour of your choice. Please note*: with small widths, the blind may hang slightly askew; this cannot be avoided. Please note: all order sizes are finished sizes of the blind, i.e. outer edge of slat to outer edge of slat = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind. Wall fitting, so that the raised slat stack is out of the window's field of view. Side caps are required for the cover plate, see configuration. Order height (outside) = window opening height plus stack height plus 3 cm = order height of the external venetian blind Fitting options: ceiling, wall, recess Please note that only our measuring guide is binding for you. Any different measuring guides from manufacturers are not valid. We have written ours to be as easy as possible for a non-specialist to follow. If you have any questions, please call our telephone hotline. The following slat colours are available. Other slat colours can be supplied on request at no extra charge – just ask. Head rail always in silver. The bottom rail and tensioning brackets of the blind are silver, dark grey or white as standard. All other colours are available at a surcharge, see configurator. We are happy to send you the stack heights and specifications of the individual slat types on request.

Order and buy the Reflexa® LifeSmall under-roof awning up to 600 cm wide x 450 cm projection in our shop. Delivery to Switzerland and Austria is available. An under-roof awning is designed for situations where fitting over or on top of the roof is not possible for technical reasons. The LifeSmall is simply fitted underneath an existing roof structure, so the fabric is not exposed to dirt, wind load or moisture. A finished under-roof awning. The corner end profile runs right through to the end. - Standard frame colours white RAL 9016, silver RAL 9006, grey-brown RAL 8019, 3 grey metallic shades and any other RAL colour. All special colours at no extra cost - Somfy or ELERO motor fitted as standard - can also be operated by crank at a reduced price - high-quality awning fabric from the Reflexa® collection - from 450 projection = fabric support wire included to prevent the fabric from sagging - cassette height only 14.8 cm On awnings over 400 cm wide or 250 cm projection, increased and possibly noticeable sagging of the fabric may occur. This reflects the current state of the art and does not affect the function or use of the awning. In borderline cases, an additional fabric support wire can counteract this. (option in the configurator) (the centre distance varies depending on the drive, see drawings) Fitting on beams with crank drive TOP picture --- fitting on beams with motor drive. The minimum distances refer to the positions of the mounting brackets on the awning box. Measuring the projection for all types of fitting: - rear edge of universal bracket at the back of the awning box to front edge of guide rail (for recess fitting, we recommend deducting 1 - 2 cm) Measuring the width when fitting with reveal brackets: - inner edge of reveal to inner edge of reveal minus 8 cm for crank drive and minus 6 cm for motor drive (this is also the centre distance) Detail of the side guide rails and the end profile. Outside and inside view. Here you can see the rail holder and, below, the available reveal brackets. Summary of product features This under-roof awning is identical in construction to the T200 under-glass awning from the system supplier Varisol. You can configure this interior conservatory shading online and order it in our shop. In certain situations it may be necessary to split the awnings and fit them side by side. Coupled under-roof awnings are not possible for technical reasons. The price of this conservatory shading always depends on the width and projection. Another form of under-roof sun protection is the Plafond PL 11 pleated blind, which shades individual panes at low cost. Unlike the under-glass awning, the pleated blinds are operated with a hand operating rod. If you have any questions about the best shading for your property, we are happy to help by phone. For external conservatory shading, choose the Life conservatory awning For conservatory shading with variable guide rails for special shapes or sloping shading, choose the LifeFlex conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

Full-surface shading from Reflexa® for conservatory roofs, with no light gaps at the sides thanks to zip technology. The zip-like system prevents the awning fabric from sagging at the sides. Larger areas up to 12 m wide are possible, and the awning can also be used in locations exposed to wind. Configure and order this conservatory shading in our shop. Features and product details: - Somfy electric motor as standard - optional radio control with wall or hand transmitter - optional bidirectional radio for smart home integration and operation via app - zip side guides with no light gaps at the fabric - protective cover for the drop bar when retracted (closed cassette) - choice of 650 colours for cassette and frame – at no extra cost - brackets / mounting feet included - housing height only 144 mm - max. width 12 metres - single units up to 6 metres wide; wider only as coupled systems (on request) - large choice of fabrics Precise fabric guidance in the side rails thanks to the zip system. Standard spacer height = 10.5 cm (also available in 15 and 20 cm heights at extra cost)

Configure Reflexa roller shutters (Heroal system) in our shop and buy them made to measure online. High quality, made in Germany. Roller shutter box shape rectangular with a 28 degree bevel at the front as standard, or a round box at no extra charge. Aluminium curtain available at a 35% surcharge (all HEROAL® system) All guide rails (22 mm deep x 53 mm wide; with integrated insect screen roller 40 mm deep x 53 mm wide) have a rubber piping insert for quiet running of the curtain. Strap operation (or Elero® or Elero 868 ® motor and remote control at a surcharge). Supplied as standard with strap pull (possible up to 4.3 m²), strap guide roller and screw caps. The rails are supplied undrilled or drilled. Fixing screws for the building structure are not included. We cannot give a guarantee for PVC units larger than 3.5 m². Combination roller shutters with a double guide rail are pre-assembled with a continuous pelmet and delivered in one piece. Box and rail colour available in any colour at no extra charge The PVC curtain is a hollow-chamber profile, 37 mm high x 8.5 mm thick. The aluminium curtain is a foam-filled, insulated profile, 37 mm high x 8 mm thick. For the colour range see above. The configurator shows the matching box size automatically under “Your selection”. It depends on height, curtain and drive (Reflexa table 2026). Now also available with a spring-loaded insect screen roller. An additional roller is fitted at the top of the box. The guide rails then have a double track (towards the inside for the insect screen roller, outside for the roller shutter) For the surcharge for an integrated insect screen roller, see configuration. (including double guide rails and accessories) Standard roller shutter or roller shutter with fly screen. All roller shutters are available made to measure with either strap pull or motor drive. The roller shutters have passed a hail impact test. According to Reflexa, its roller shutters are made in Germany. Order in our shop and configure what you need. We also deliver to Austria, Switzerland and other selected EU countries.

Self-supporting sloping external venetian blinds are particularly suitable for fitting to glass façades and low-energy houses. Sophisticated shading for special fitting situations. This type of shading is needed where the building does not allow fitting directly to the façade or window frame. The complete construction consists of the sloping external venetian blind, guide rails and pelmet. An electric motor drives the blind and controls the tilting of the slats. The bottom rail is a telescopic rail that automatically shortens and lengthens as the blind moves up and down, depending on the angle required. This blind is only available with guide rails. Double, reinforced guide rail brackets hold the complete system and the factory-fitted U-shaped pelmet. Details and features: fitted with 80 mm nipple-guided flat slats, available in many colours available with an inclination of up to 45 degrees (full list at the end of this page) ELERO 230 V motor as standard radio control possible U-shaped square box pelmet to cover the slat stack included as standard (round version on request) side caps for the pelmet included as standard fully pre-assembled and ready to fit double guide rail brackets in various sizes guide rails, pelmet, bottom rail and spacers available in any colour at no extra cost guide rails available in round or square design guide rails always inside the pelmet Horizontal and vertical sectional drawings are provided below to help you with measuring. If you need technical support, please send us photos at: shop(at)sonnenschutzshop24.eu Please refer to the technical drawings for the measuring guidelines. All available slat colours for the Asyflex 80 NF self-supporting. Stack sizes and pelmet sizes – finished sizes with rail guidance: (parallel to the slope) 80 mm slats up to 120 cm blind height = 16 cm / 19 cm 80 mm slats up to 140 cm blind height = 17 cm / 20 cm 80 mm slats up to 160 cm blind height = 19 cm / 22 cm 80 mm slats up to 180 cm blind height = 20 cm / 23 cm 80 mm slats up to 200 cm blind height = 20 cm / 23 cm 80 mm slats up to 220 cm blind height = 21 cm / 24 cm 80 mm slats up to 240 cm blind height = 23 cm / 26 cm 80 mm slats up to 260 cm blind height = 24 cm / 27 cm 80 mm slats up to 280 cm blind height = 26 cm / 30 cm 80 mm slats up to 300 cm blind height = 27 cm / 30 cm 80 mm slats up to 320 cm blind height = 28 cm / 31 cm 80 mm slats up to 340 cm blind height = 29 cm / 32 cm 80 mm slats up to 360 cm blind height = 31 cm / 34 cm 80 mm slats up to 390 cm blind height = 33 cm / 36 cm Stack sizes and pelmet sizes with stainless steel rod guidance. (parallel to the slope) 80 mm slats up to 120 cm blind height = 15 cm / 18 cm 80 mm slats up to 140 cm blind height = 16 cm / 19 cm 80 mm slats up to 160 cm blind height = 17 cm / 20 cm 80 mm slats up to 180 cm blind height = 18 cm / 21 cm 80 mm slats up to 200 cm blind height = 19 cm / 22 cm 80 mm slats up to 220 cm blind height = 19 cm / 22 cm 80 mm slats up to 240 cm blind height = 20 cm / 23 cm 80 mm slats up to 260 cm blind height = 21 cm / 24 cm 80 mm slats up to 280 cm blind height = 22 cm / 25 cm 80 mm slats up to 300 cm blind height = 23 cm / 26 cm 80 mm slats up to 320 cm blind height = 24 cm / 27 cm 80 mm slats up to 340 cm blind height = 25 cm / 28 cm 80 mm slats up to 360 cm blind height = 26 cm / 29 cm 80 mm slats up to 390 cm blind height = 28 cm / 31 cm Manufacturing limits for sloping external venetian blinds: up to 190 cm width = up to 45 degrees inclination up to 200 cm width = up to 44 degrees inclination up to 210 cm width = up to 41 degrees inclination up to 220 cm width = up to 37 degrees inclination up to 230 cm width = up to 34 degrees inclination up to 240 cm width = up to 30 degrees inclination up to 250 cm width = up to 25 degrees inclination up to 260 cm width = up to 19 degrees inclination up to 270 cm width = up to 12 degrees inclination (only with rail guidance and 80 mm slats)

The Asyflex sloping external venetian blind is the ideal external sun protection and privacy solution for sloping windows and other special shapes. The Reflexa AsyFlex sloping external venetian blind is a versatile slat system. Thanks to a patented telescopic rail, windows and glazed areas with a pitch of up to 45 degrees can be shaded. Sloping external venetian blinds are becoming increasingly popular. Despite their high cost, they are almost indispensable in summer. They can be used in many different situations and you can configure them online with us. Sloping shading can be made as a roller shutter or as a venetian blind. Both systems are always electrically operated. For many years Reflexa® has been a pioneer in developing these complex external shading systems for sloping windows. Use our configurator and you will receive a competitive online price immediately. New: from 04/2026 the Asyflex 80 SMS can be ordered as a quick-fit system. Winner of the 2015 Innovation Award at the R+T trade fair. New: Asyflex with rail guide (nipple guide). The adjustable slat positions of the sloping external venetian blind allow almost unlimited control of incoming light. The adjustable aluminium slats look light and unobtrusive, which also makes them ideal for conservatories and glass extensions. They can be set anywhere from closed through half open to fully open. The AsyFlex sloping blind can also be combined with a matching straight external venetian blind. We are happy to advise you on planning. Design your façade without compromise. The wide choice of colours lets you combine the slats, pelmets and telescopic rails as you wish. Standard rails are T-groove guide rails. Blackout rails S70 are available as an option. Further features of the sloping external venetian blind: The slats are made from a curved special aluminium strip with a lightfast, corrosion-resistant paint finish. Available as an 80 mm flat slat (up to 270 cm width with rail guide). To cover the slat stack when the blind is raised, we can supply an L-shaped or U-shaped cover plate in a matching colour. For fitting in front of the house wall, the cover plate is supplied closed at the sides (with side caps). For fitting in the reveal, a cover plate open at the sides is recommended. Details of the Asyflex blind: the blind is guided at the sides by a stainless steel rod or by 25 x 25 mm side rails (80 mm slats only). Supplied as standard with a high-quality 230 V mains motor. The drive is pre-installed out of sight in the head rail. Delivery within Germany is free of charge, using the manufacturer's own vehicles at no risk to you. We deliver throughout the EU and to Switzerland. The production sizes are derived from these measurements (geometric shape). Deductions are made at the factory. When fitting in front of a reveal opening (on an open house wall), please allow for the necessary overlaps all round and for the stack sizes. All order sizes are finished sizes of the blind. The type of fitting must be selected in the configurator; this determines whether deductions are made or the sizes are taken as finished sizes. If you make your own deductions for fitting in the reveal, please note that this also changes the diagonal of the geometric shape, which in turn changes the heights accordingly. If you make a deduction from the base width, a new geometric shape must therefore be measured vertically upwards, which will not match the net dimensions of the actual reveal. Explanation of a sample external venetian blind and the corresponding stack and pelmet sizes: Stack sizes and pelmet sizes – finished sizes with rail guide: (parallel to the slope) 80 mm slats up to 120 cm blind height = 16 cm / 19 cm 80 mm slats up to 140 cm blind height = 17 cm / 20 cm 80 mm slats up to 160 cm blind height = 19 cm / 22 cm 80 mm slats up to 180 cm blind height = 20 cm / 23 cm 80 mm slats up to 200 cm blind height = 20 cm / 23 cm 80 mm slats up to 220 cm blind height = 21 cm / 24 cm 80 mm slats up to 240 cm blind height = 23 cm / 26 cm 80 mm slats up to 260 cm blind height = 24 cm / 27 cm 80 mm slats up to 280 cm blind height = 26 cm / 30 cm 80 mm slats up to 300 cm blind height = 27 cm / 30 cm 80 mm slats up to 320 cm blind height = 28 cm / 31 cm 80 mm slats up to 340 cm blind height = 29 cm / 32 cm 80 mm slats up to 360 cm blind height = 31 cm / 34 cm 80 mm slats up to 390 cm blind height = 33 cm / 36 cm Stack sizes and pelmet sizes with wire and stainless steel rod guide (parallel to the slope) 80 mm slats up to 120 cm blind height = 15 cm / 18 cm 80 mm slats up to 140 cm blind height = 16 cm / 19 cm 80 mm slats up to 160 cm blind height = 17 cm / 20 cm 80 mm slats up to 180 cm blind height = 18 cm / 21 cm 80 mm slats up to 200 cm blind height = 19 cm / 22 cm 80 mm slats up to 220 cm blind height = 19 cm / 22 cm 80 mm slats up to 240 cm blind height = 20 cm / 23 cm 80 mm slats up to 260 cm blind height = 21 cm / 24 cm 80 mm slats up to 280 cm blind height = 22 cm / 25 cm 80 mm slats up to 300 cm blind height = 23 cm / 26 cm 80 mm slats up to 320 cm blind height = 24 cm / 27 cm 80 mm slats up to 340 cm blind height = 25 cm / 28 cm 80 mm slats up to 360 cm blind height = 26 cm / 29 cm 80 mm slats up to 390 cm blind height = 28 cm / 31 cm Possible sizes of sloping external venetian blinds: up to 1876 mm width = up to 45 degrees pitch up to 1909 mm width = up to 44 degrees pitch up to 2003 mm width = up to 41 degrees pitch up to 2121 mm width = up to 37 degrees pitch up to 2202 mm width = up to 34 degrees pitch up to 2301 mm width = up to 30 degrees pitch up to 2408 mm width = up to 25 degrees pitch up to 2513 mm width = up to 19 degrees pitch up to 2601 mm width = up to 12 degrees pitch up to 2649 mm width = up to 5 degrees pitch New: now also available as the Asyflex 80 SMS sloping external venetian blind, quick-fit system

• up to 550 × 300 cm
• crank, motor, radio or solar
• optional Duomatic: tilt up to 55° by crank

• up to 550 × 300 cm
• motor, radio or solar
• 14 cm high cassette

• up to 550 × 300 cm
• crank, motor, radio or solar
• 13 cm flat cassette

• up to 700 × 400 cm
• crank, motor, radio or solar
• no visible screw fittings, optional Duomatic

• up to 700 × 400 cm
• crank, motor, radio or solar
• also with crossed arms or vario valance