Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Go to homepage
Send a message
€0.00

Made-to-measure sun protection

Reflexa® external venetian blind EL71 N with V-slat made to measure

Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
  • Width up to 470 cm, height up to 400 cm
from €637.30
incl. VAT · free shipping within Germany (except islands)
Delivery time 3-5 weeks
Configure now Advice +49 9732 3023858
Free shipping within Germany (except islands)
Payment by prepayment (bank transfer)
24 months statutory warranty
Expert advice Mon–Fri · +49 9732 3023858

Configurator

Reflexa® external venetian blind EL71 N with V-slat in 3 steps

Choose step by step. The price updates with every change, and you can change completed steps at any time.

cm
cm
Info and measuring guide

The basis for dimensioning is the top edge of the top rail to the bottom edge of the bottom rail.

up to 100 cm total height = 15.1 cm stack

up to 120 cm total height = 16.5 cm stack

up to 140 cm total height = 17.9 cm stack

up to 160 cm total height = 19.7 cm stack

up to 180 cm total height = 21.1 cm stack

up to 200 cm total height = 22.5 cm stack

up to 220 cm total height = 24.3 cm stack

up to 240 cm total height = 25.7 cm stack

up to 260 cm total height = 27.1 cm stack

up to 280 cm total height = 28.9 cm stack

up to 300 cm total height = 30.3 cm stack

up to 320 cm total height = 31.7 cm stack

up to 340 cm total height = 33.5 cm stack

up to 360 cm total height = 34.9 cm stack

up to 380 cm total height = 36.3 cm stack

up to 400 cm total height = 38.1 cm stack

Factory fascia dimension = plus 2.5 cm as height allowance.

How to measure

Measuring instructions as for the other external venetian blinds and as follows:

Please note: all order sizes are finished sizes of the blind. So outer edge of guide rail to outer edge of guide rail = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind.

Measuring the order width (outside) for fitting with spacers on the window frame.

- Measure the narrowest dimension from wall to inner wall edge minus 1 cm = order width of the external blind. The guide rails are screwed to the window frame using spacers = fitting in the window opening.

Measuring the order height (outside)

From the underside of the window opening (also called the reveal or lintel) to the top of the windowsill

minus 5 millimetres = order height of the external blind

Alternative fitting method

Measuring the order width (outside) for fitting without spacers in the wall opening.

- Measure the narrowest dimension from wall to inner wall edge without deduction = order width of the external blind. Here the guide rails are simply screwed through the guide into the side wall = fitting in the window opening.

Measuring the order height (outside)

From the underside of the window opening to the top of the windowsill, minus 5 millimetres = order height of the external blind

Alternative fitting method

Measuring the order width (outside) for fitting with spacers in front of the window opening.

- Window opening plus approx. 5 cm overlap on the right and left = order width of the external blind. Fitting is therefore on the wall, so that the raised blind stack is not in the field of view of the window. Side covers are required for the cover plate, see configuration.

Measuring the order height (outside) - window opening plus stack height plus 3 cm = order height of the external blind

Phone: +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Motor side
Motor type
Type
Fitting type
Colour

The colour dots show an approximate shade – screen colours may differ from the original.

Rail colour

The colour dots show an approximate shade – screen colours may differ from the original.

This refers to the colour of the bottom rail as well as the colour of the guide rails and any spacers (ABH).
Info and measuring guide
Spacer

Standard T-slot rails with spacers

Spacer

If you do not select any spacers, we will supply the standard size.

Spacer

On request without spacers, for screwing the guide rail through the guide, between the reveal or for plastering in.

Spacer

Blackout rails without side light entry, type S 70, two-part. Particularly useful with blackout slats if maximum blackout is also required at the sides.

Extras
Info and measuring guide

- 38-degree working position:

When the blind is lowered, the working position switches on automatically and tilts the slats to an opening angle of 38 degrees. This angle ensures optimum protection from sun and glare and meets the requirements of the German Workplace Ordinance (Arbeitsstättenverordnung). The working position is held in any stopping position of the blind and can likewise be deactivated in any position.

Aluminium angled pelmet
Side cap
Call-back service
Please complete all steps first.

Product description

The new blackout external venetian blinds from Reflexa®, with the 71 mm V-slat as type EL71 N, can be configured made to measure and ordered online in our shop.

Thanks to the special curvature of the slats, near blackout can be achieved. Fitted without spacers. The new S-guide rails are used. Soft closing thanks to rubber seals between the slats.

All guide rails can be ordered. Standard or S70 blackout rails. (selectable in the configurator)


If you have any questions about your planning, we will be happy to help. Shipping and delivery with our own vehicles, on request also to Austria and Switzerland as well as selected EU countries.


The new V-slat type EL71 N with rail guidance and almost complete blackout.

Max. width 470 cm x 400 cm height.

Harmonious appearance thanks to perfect workmanship.


Even, neat stacking of the slats.

Stack sizes of the complete external venetian blind when fully raised.

Measurement basis is top edge of head rail to bottom edge of bottom rail.

up to 100 cm total height = 15.1 cm stack

up to 120 cm total height = 16.5 cm stack

up to 140 cm total height = 17.9 cm stack

up to 160 cm total height = 19.7 cm stack

up to 180 cm total height = 21.1 cm stack

up to 200 cm total height = 22.5 cm stack

up to 220 cm total height = 24.3 cm stack

up to 240 cm total height = 25.7 cm stack

up to 260 cm total height = 27.1 cm stack

up to 280 cm total height = 28.9 cm stack

up to 300 cm total height = 30.3 cm stack

up to 320 cm total height = 31.7 cm stack

up to 340 cm total height = 33.5 cm stack

up to 360 cm total height = 34.9 cm stack

up to 380 cm total height = 36.3 cm stack

up to 400 cm total height = 38.1 cm stack

Factory pelmet size = plus 2.5 cm added to the height.

Fitting options: ceiling, wall, recess

For additional blackout of a window with blackout slats, choose our good-value blackout external venetian blind.



Technology & fitting

Key data from the configurator

Sizes
Width up to 470 cm · height up to 400 cm
Delivery time
3-5 weeks

Instructions & downloads

Advice

Personal expert advice

Not sure about size, fabric or fitting? Call us or let us check your configuration before production.

+49 9732 3023858

Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Have my configuration checked

What customers say

4,83
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert

Overall rating of our shop on ProvenExpert. As of 18.10.2026

All reviews on ProvenExpert

Reviews of this product

Reflexa® external venetian blind EL71 N with V-slat
This website uses cookies to ensure the best experience possible. More information...