with 50 mm slats

Order external venetian blinds with 50 mm aluminium slats here – small stack heights, a wide range of uses and many drive options. High-quality Reflexa® external venetian blinds with 50 mm aluminium slats, crank or motor operation, made in Germany and of the latest generation (180 degree tilt). At the bottom of this page (below the colours) you will find detailed technical descriptions and PDFs to print out. Prices for external venetian blinds with 50 mm slats are slightly lower than for the wider, flanged slats. Order in our shop and configure your new external venetian blind. The picture above shows the Reflexa® EMA 50 endless cord blind, which carries out all functions – tilting the slats as well as raising and lowering the blind. During installation the cord is led through the window frame (drill a hole through the frame or wall beforehand) and operated via a deflection pulley (included in the delivery). For endless cord gears and crank drives we always make the gear flush with the head rail. The pictures show the gear protruding. Changing from "flush" to "protruding" is easy during installation. Reflexa® endless cord operation is the best-selling version for 50 mm slats. Endless cord gears are an economical version of the external venetian blind. - 50 mm external venetian blinds are available with endless cord gear, crank drive, motor drive or radio-controlled motor; the manufacturer is always Reflexa. Reflexa® motor operation Crank operation We offer 50 mm slats up to a width of 500 cm (cord pull up to 300 cm width, endless cord gear up to 250 cm, crank and motor up to 500 cm width) and a maximum height of 360 cm. For larger blind sizes, please choose the 60, 80 or 88 mm slats, which are flanged at the sides. For protection against wind and weather, the 50 mm blinds can be made with lateral tensioning using a nylon-coated steel wire. For widths over 200 cm we recommend an additional central guide wire (wind protection). To cover the head rail and the slat stack when the blind is raised, an angle cover plate in a matching RAL colour can be fitted on top. The endless cord gear is durable and maintenance-free. Ladder tapes made of 100% Terylene. Head rail always in natural silver, 57 x 51 mm or 40 x 30 mm depending on the drive type. Bottom rail 51 x 20 mm, coated in a colour of your choice. Please note*: with small widths, the blind may hang slightly askew; this cannot be avoided. Please note: all order sizes are finished sizes of the blind, i.e. outer edge of slat to outer edge of slat = order width, and top edge of blind to bottom edge of bottom rail = order height of the finished blind. Wall fitting, so that the raised slat stack is out of the window's field of view. Side caps are required for the cover plate, see configuration. Order height (outside) = window opening height plus stack height plus 3 cm = order height of the external venetian blind Fitting options: ceiling, wall, recess Please note that only our measuring guide is binding for you. Any different measuring guides from manufacturers are not valid. We have written ours to be as easy as possible for a non-specialist to follow. If you have any questions, please call our telephone hotline. The following slat colours are available. Other slat colours can be supplied on request at no extra charge – just ask. Head rail always in silver. The bottom rail and tensioning brackets of the blind are silver, dark grey or white as standard. All other colours are available at a surcharge, see configurator. We are happy to send you the stack heights and specifications of the individual slat types on request.