Honeycomb pleated blinds
With the Cosiflor honeycomb blind, two layers of fabric form a honeycomb. The cords run in the space between them, so the fabric needs no punched holes – with blackout fabric it darkens very well. The side facing the glass is white and thermal-coated. As well as blackout fabrics there are semi-transparent fabrics that are washable at up to 30 degrees.
The honeycomb blind is made tensioned and is intended for vertical windows. For roof windows there are dedicated Duette blinds in the roof window section.
- Made to the millimetre
- Free shipping within Germany (except islands)
- Instant price in the configurator
4,83★★★★★282 reviews
Subcategories
Our models
Configure and order honeycomb pleated blinds without punched holes, in blackout or semi-transparent fabric, made to measure. These pleated blinds are only suitable for vertical windows (not for roof windows or overhead windows). The ideal made-to-measure blackout honeycomb blind for conservatories, roof windows, bedrooms and, on request, special shapes. Ceiling bracket Wall angle bracket Clamp bracket Clips for VS 1 + VS 2 Cosiflor honeycomb blind with unpunched fabric, as it is double-layered (Cosiflor honeycomb fabric = unique). This fabric is designed like a honeycomb. The cords run in the space between the layers, so total blackout (for blackout fabrics see below) is possible across the whole fabric area. Side facing the glass = white Thermostop, room side = textile With the semi-transparent fabrics, both sides are textile; the fabric is still unpunched but semi-transparent overall. The fabric samples for these are shown in the configurator. Made to measure with 25 mm pleat depth. Delivery time approx. 1-2 weeks. VS 1 VS 2 Measure the height of the glazing rebate without deduction = order height - measure the smallest width of the glazing rebate from inner edge to inner edge, minus 2 mm (smallest width = in front of the seal = material dimension of the glazing rebate at its narrowest point; ignore the rubber seal) VS 1 and VS 2 are only suitable for vertical fitting (not overhead). This method of measuring corresponds to clips screwed into the glazing rebate. All accessories are included. To stop them swinging, these pleated blinds are tensioned at the sides with nylon cord. They are operated by handles in the middle, which allow the fabric to be adjusted continuously. As standard, this version is operated from the top down = corresponds to VS 1. At no extra cost, you can also choose top-down/bottom-up operation = corresponds to VS 2. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white, black-brown and anthracite. Note: This is a permanent low-price offer specifically for the Cosiflor honeycomb pleated blind collection 2016 with a white Thermostop coating on the back and total blackout, as well as Cosiflor honeycomb semi-transparent, washable at 30 degrees (unpunched honeycomb fabric, 100% polyester) You can choose from 15 colours in blackout quality with thermal protection and 26 colours in a semi-transparent version without thermal protection, see configurator. Cosiflor honeycomb with total blackout fabric = blackout pleated blind without punched holes For glazing rebate fitting = minimum depth of the glazing rebate = 23 mm. Fit the tensioning feet as described in the fitting instructions supplied with the blind. Fabric properties of the blackout fabrics: 72% reflection, 28% absorption, 0% transmission Cosiflor honeycomb with semi-transparent fabric = the ideal pleated blind without punched holes. Order this very effective sun and heat protection, configure your new honeycomb blinds to measure and have them delivered free of shipping charges.
VS 1 or VS 2?
The honeycomb blind is tensioned and secured against swinging with nylon cords at the sides. As standard it is operated from top to bottom (VS 1); at no extra cost you can choose operation from both sides (VS 2). It is moved with sliding handles in the middle. It is made 30 to 150 cm wide and 30 to 260 cm high, with a 25 mm pleat depth.
Blackout or semi-transparent?
With the blackout fabrics, the side facing the glass is white with a thermal coating and the inside is textile; full blackout is possible across the fabric area. The semi-transparent fabrics are textile on both sides, also without holes, but let light through overall.
Fitting and measuring
It is fitted with clips in the glazing rebate, with brackets on the frame or with clamp brackets without drilling. For clip fitting, measure the height of the glazing rebate without deduction – this is the order height – and the smallest width of the glazing rebate from inner edge to inner edge minus 2 mm. The honeycomb blind is only suitable for vertical windows, not for overhead fitting.
More pleated blinds
- erfal made-to-measure pleated blinds – tensioned, free-hanging, L blind up to 360 cm
- ECOsaver pleated blind – fabrics in five price groups
- S-Plissee SMART – slim profiles with recessed grip
- Cosiflor system pleated blinds – ten designs, also for sloped windows
- Roof window pleated blinds – by window type