Made-to-measure pleated blinds

A tensioned pleated blind with concealed cords On the FSG 2 the cords do not hang loose – they run out of sight in side rails. This keeps them out of reach of small children; according to erfal, the cord guide complies with EN 13120. The side rails have another benefit: very little light gets in at the edges. Both the top and the bottom rail can be moved. The blind is screwed in place – in the window recess, on the reveal or on the window or door frame. If you need a different fixing, please add it under “Notes”; other options are available on request. Size: 20 to 120 cm wide, 20 to 230 cm high (finished size) Operation: top and bottom rail adjustable Cords: concealed in side rails, to EN 13120 according to erfal Fitting: screwed into the recess, onto the reveal or onto the frame Fabrics: 761 erfal pleated fabrics; some fabrics only in smaller sizes

A pleated blind in a magnetic frame – fitted without drilling With Easy Frame, you stick a self-adhesive steel strip onto the window sash, and the magnetic frame with the pre-installed pleated blind holds onto it. There is no drilling or screwing, and the frame can be taken off at any time in one move. The frame holds either an ESG 1, an ESG 2 or the slim S-Plissee VS 2 ML. The frame is available in 5 colours. In the configurator you specify whether your measurements refer to the outer edge of the magnetic frame or to the clear sash opening. Size: 20 to 150 cm wide, 20 to 200 cm high; ESG over 120 cm wide up to 180 cm high Versions: ESG 1, ESG 2 or S-Plissee VS 2 ML in a magnetic frame Fitting: stick the steel strip onto the sash, attach the frame – no drilling Frame: 5 colours Fabrics: 763 erfal pleated fabrics

Configure and buy made-to-measure pleated blinds here with the ECOsaver range. Delivery costs Germany = € 0.00 Delivery costs EU and CH: see the configurator. The fabrics offered here are sourced from independent weavers that are not tied to any particular system. They are nevertheless high-quality and comparable to the original system manufacturers' fabrics. We use a high-quality aluminium rail system. The fabrics are divided into just 5 price groups. - Eco1 = plain fabrics in 20 colours, uncoated or with heat-protection backing (price group 1) - Eco2 = crush fabrics in 20 colours, uncoated or with heat-protection backing (price group 2) - Eco3 = decorative fabrics, transparent and semi-transparent, without heat protection, some honeycomb fabrics without perforation (price group 3) - Eco4 = DIMOUT fabrics, strong heat protection, low light transmission (price group 4) - Eco5 = blackout fabrics with strong heat protection Available as single-layer fabrics and honeycomb fabrics without perforation (price group 5) We offer the ECOsaver pleated blind range only as VES 1, VES 2 (both tensioned) or FR 1 free-hanging (with cord pull). Other special shapes are not possible. Not suitable for overhead or sloping windows. Type VES1 Type VES2 (available from 21 cm width) Type FR 1 All accessories are included. To prevent swinging, pleated blind types VES 1 and VES 2 are tensioned at the sides with a matching nylon cord. The blind is operated using handles in the centre, which allow infinitely variable adjustment of the fabric. As standard, this version is operated from top to bottom = VES 1. At no extra cost, you can also choose top-down/bottom-up operation = VES 2. All aluminium rails are available in silver grey, white, ivory or mahogany brown, with matching PVC parts / end caps. Clamp brackets are only available in white or brown. white silver ivory mahogany brown Colour samples can be found in the configuration. Order your new made-to-measure pleated blinds online in the shop – for blackout, privacy or sun protection. We also deliver to Switzerland, Austria and selected EU countries.

A free-hanging pleated blind for large windows and doors This pleated blind is fixed only at the top and is lowered like a roller blind. That makes it a good fit for large windows and doors, where a tensioned blind would be awkward to operate. A pull cord is the simplest option; on large, heavy blinds a chain is more comfortable. The FG spring-loaded version needs no cord at all, which makes it a sensible choice for children's rooms. With a battery motor you operate the blind using the remote control supplied and recharge it via USB. The top-down versions ESS 5 and ESM 5 also open from the top, so the lower part keeps its privacy while daylight comes in above. For tilting or slightly inclined windows, a tension-wire guide on both sides stops the blind from swinging. Size: up to 280 cm wide and 260 cm high, depending on version (finished size, minimum 20 cm) Versions: ESS 1, day and night ESS 3, top-down ESS 5, chain ESB 1, spring-loaded FG, battery motor ESM 1 and ESM 5 Fitting: retaining clips on wall, ceiling or window frame, angle brackets or clamp brackets with no drilling; FG with wall/ceiling brackets Fabrics: 762 erfal pleated fabrics

One pleated blind for large window fronts up to 3.60 m The L-Plissee is designed for large windows: up to 300 cm wide with cord operation and up to 360 cm with a battery motor, in each case up to 300 cm high. Besides the standard 20/25 mm pleat, there is the 32 mm Maxi pleat and the 64 mm XL Maxi honeycomb. The LSC 1 is tensioned and operated by a continuous cord at the side; the LSC 5 hangs freely and has a central pull cord. On the LMB 5, the Bliss battery motor does the work, with charger and remote control available on request. It is fitted with a wall bracket and clip to the ceiling or wall. Depending on fabric and area, tighter limits may apply – every order is checked before production. LSC 1: 45 to 300 cm wide, 25 to 260 cm high (finished size) LSC 5: 55 to 300 cm wide, up to 300 cm high LMB 5 with battery motor: 50 to 360 cm wide, 45 to 300 cm high Pleat size: 20/25 mm, Maxi 32 mm or XL Maxi honeycomb 64 mm Fabrics: 729 erfal fabrics; rails in white, black or grey

Configure and order honeycomb pleated blinds without punched holes, in blackout or semi-transparent fabric, made to measure. These pleated blinds are only suitable for vertical windows (not for roof windows or overhead windows). The ideal made-to-measure blackout honeycomb blind for conservatories, roof windows, bedrooms and, on request, special shapes. Ceiling bracket Wall angle bracket Clamp bracket Clips for VS 1 + VS 2 Cosiflor honeycomb blind with unpunched fabric, as it is double-layered (Cosiflor honeycomb fabric = unique). This fabric is designed like a honeycomb. The cords run in the space between the layers, so total blackout (for blackout fabrics see below) is possible across the whole fabric area. Side facing the glass = white Thermostop, room side = textile With the semi-transparent fabrics, both sides are textile; the fabric is still unpunched but semi-transparent overall. The fabric samples for these are shown in the configurator. Made to measure with 25 mm pleat depth. Delivery time approx. 1-2 weeks. VS 1 VS 2 Measure the height of the glazing rebate without deduction = order height - measure the smallest width of the glazing rebate from inner edge to inner edge, minus 2 mm (smallest width = in front of the seal = material dimension of the glazing rebate at its narrowest point; ignore the rubber seal) VS 1 and VS 2 are only suitable for vertical fitting (not overhead). This method of measuring corresponds to clips screwed into the glazing rebate. All accessories are included. To stop them swinging, these pleated blinds are tensioned at the sides with nylon cord. They are operated by handles in the middle, which allow the fabric to be adjusted continuously. As standard, this version is operated from the top down = corresponds to VS 1. At no extra cost, you can also choose top-down/bottom-up operation = corresponds to VS 2. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white, black-brown and anthracite. Note: This is a permanent low-price offer specifically for the Cosiflor honeycomb pleated blind collection 2016 with a white Thermostop coating on the back and total blackout, as well as Cosiflor honeycomb semi-transparent, washable at 30 degrees (unpunched honeycomb fabric, 100% polyester) You can choose from 15 colours in blackout quality with thermal protection and 26 colours in a semi-transparent version without thermal protection, see configurator. Cosiflor honeycomb with total blackout fabric = blackout pleated blind without punched holes For glazing rebate fitting = minimum depth of the glazing rebate = 23 mm. Fit the tensioning feet as described in the fitting instructions supplied with the blind. Fabric properties of the blackout fabrics: 72% reflection, 28% absorption, 0% transmission Cosiflor honeycomb with semi-transparent fabric = the ideal pleated blind without punched holes. Order this very effective sun and heat protection, configure your new honeycomb blinds to measure and have them delivered free of shipping charges.

Order pleated blinds in all shapes and colours from our pleated blind shop, with free shipping. Delivery to Germany, the EU and Switzerland Ceiling brackets (clips) Wall angle brackets Clamp brackets + € 13.50 per pleated blind These blinds are simply fitted onto the window or door frame. All accessories are included. Up to 800 mm width the blind is operated from the high side only; from a base width of 810 mm it is also operated from the low side (see drawing below). Depending on the angle and size, version F 1 or F 2 is applied automatically. The fabric can always be raised all the way to the top. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.

Order Cosiflor pleated blinds with continuous chain or motor in our pleated blind shop, in all shapes and colours, with free shipping. Delivery to Germany, the EU and Switzerland. Ceiling bracket Wall angle bracket Clamp bracket + € 13.50 per pleated blind The blind is operated with a bead chain or motor, which allows it to be adjusted to any position. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.

A pleated blind for conservatories, sloping ceilings and horizontal glazing This plafond pleated blind is made for glass surfaces that are sloping or horizontal – in a conservatory as well as under a sloping roof. It is installed tensioned and can be up to 150 cm wide and 400 cm long. There are three ways to operate it: the WG 1 is moved with a handle, the WK with a crank or an electric rod, and the WM runs on a battery motor. It is fixed with a retaining clip or angle bracket. Mounting profiles, mounting brackets and the hand crank or electric rod for the WK are available on request – please mention this under “Notes”. Size: up to 150 cm wide and 400 cm long (finished size); minimum width WK 20 cm, WG 1 30 cm, WM 50 cm Operation: handle (WG 1), crank or electric rod (WK), battery motor (WM) Fitting: retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 790 erfal pleated fabrics

A plafond pleated blind for conservatories with special shapes This tensioned plafond pleated blind is designed for sloping and horizontal glass surfaces in trapezoid, triangular, pentagonal or hexagonal shapes – in conservatories as well as under sloping roofs. Triangles are also available as a fixed version. It is operated by a handle on the top or middle rail, with an operating-rod grip available if you prefer. To measure, you need the width and height of the finished blind and, depending on the shape, the smaller width or smaller height. Please describe a dimensioned sketch under “Notes”. The angles of the slopes must lie within the stated range; every sketch is checked before production. Size: EWG 50–53 up to 150 cm wide (EWG 53 up to 120 cm) and up to 150 or 200 cm long; EWG 54–56 up to 150 cm wide and 400 cm long Fixed: EFW 1/2 up to 180 or 200 cm Operation: handle on the top or middle rail, operating-rod grip available Fitting: “small” retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 686 erfal pleated fabrics, 5 profile colours

Plafond under-roof pleated blinds are a good alternative to typical roof-mounted conservatory shading. This conservatory shading is very easy to fit and very durable. The high-quality Cosiflor rail system adapts to almost any fitting situation. All fitting accessories are supplied. Choice of ceiling brackets or wall adapter angle brackets These blinds are fitted directly under the glass using clips or angle brackets. Particularly recommended for conservatory roofs. They are operated with a sliding rod. This type of shading is practical and good value when you compare external sun protection systems with these pleated blinds. Fitting really is simple, and all accessories are supplied. The fabric is self-tensioned and also has steel cables between the rails, which can be adjusted during fitting. This design always achieves optimum tension across the blind, so the fabric does not sag even over long lengths. All aluminium rails are available in silver-grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown. Here are a few examples of other ways PL11 roof systems can be used:

Free-hanging Cosiflor pleated blinds type F1 or F2, wide choice of fabrics, made to measure up to 180 cm wide. Always free shipping within Germany. Delivery to Germany, the EU and Switzerland. Ceiling bracket (clips) Wall angle bracket Clamp bracket Operated by cord pull on the left or right. Type F 1 = operated from top to bottom. Type F 2 = top-down/bottom-up operation. Infinitely variable height adjustment with cord brake. All accessories are included. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown. Max. size is 260 cm high and up to 180 cm wide in the configurator, up to 230 cm wide on request.

Order Cosiflor VS 8 pleated blinds in our pleated blind shop, in all shapes and colours, with free shipping. All fitting accessories are included. Fitting in the glazing rebate or on the frame is possible. Choice of ceiling brackets or wall angle brackets

Decorative Cosiflor pleated blinds with a wide choice of fabrics, made to measure – order in our shop. Buy this high-quality pleated blind system and configure it in the shop. Delivery to Germany, the EU and Switzerland: Cosiflor pleated blinds are versatile and can be fitted in almost any situation. We distinguish between fitting in the glazing rebate (directly in front of the pane), fitting on the window or door frame (for windows with glazing bars or doors) or, where drilling is not allowed, fitting with clamp brackets on the window or door sash. The different measuring options are described below. These pleated blinds are only suitable for vertical windows. (not for roof windows or overhead windows) Please note that we do not offer the new glazing bead clips that competitors advertise with the slogan "fitting in the glazing bead without drilling". In our opinion this system is not fully developed and can damage the insulation of the window or door and, in rare cases, even cause the glass to break. With conventional glazing bead fitting, which we can recommend, the tension shoes (clips VS 1 / VS 2) are screwed into the glazing bead as shown in the picture. Installation instructions are available as a PDF at the end of this page. These brackets can be selected: ceiling bracket, wall angle bracket, clamp bracket, clips for VS 1 + VS 2, also available with adhesive plates All accessories are included. To stop them swinging, these pleated blinds are tensioned at the sides with nylon cord. They are operated by handles in the middle, which allow the blind to be adjusted to any position. As standard, this version is operated from top to bottom = VS 1. At no extra cost, you can also choose operation from both sides = VS 2. All aluminium rails are available in silver grey, white, bronze, black-brown and anthracite. The matching PVC parts for the pleated blind are available in grey, white and black-brown.

Special-shape shading as a four-sided pleated blind, tensioned at the sides, for tilt-and-turn windows, doors and conservatory shading Delivery to Germany, the EU and Switzerland. Ceiling bracket Wall angle bracket Clamp bracket + € 21.00 per pleated blind They are operated by a sliding handle in the middle, which allows infinitely variable adjustment of the fabric. As standard, this version is operated from top to bottom. The upper triangle cannot be operated. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.

Order special-shape pleated blinds in our pleated blind shop, in all shapes and colours, with free shipping. All fitting accessories are included. Glazing rebate fitting and frame fitting possible. Choice of ceiling bracket or wall angle bracket VS 5 VS 6 Measuring guide: (for fitting in the glazing rebate) - measure the height of the glazing rebate without deduction H 1 - measure the smallest width of the glazing rebate without deduction B - measure the short height without deduction H 2 - measure the top width without deduction - measure the slope without deduction All necessary deductions are made during production! Can be fitted in the glazing rebate with clips or on the frame with angle brackets. For frame fitting, please add 8 cm to the width and height.

Order Cosiflor pleated blinds type VS 9 or VS 10 in our pleated blind shop, in all shapes and colours, with free shipping. All fitting accessories are included. Fitting in the glazing rebate or on the frame is possible. Choice of ceiling brackets or wall angle brackets VS9 VS10 Measuring instructions: - measure the height of the glazing rebate without deduction - measure the smallest width of the glazing rebate without deduction - measure the sloping side of the triangle without deduction All necessary deductions are made during manufacture! Fitting in the glazing rebate with clips or on the frame with angle brackets. For fitting on the frame, please add 4 cm to the width and 8 cm to the height (please watch out for protruding handle fittings).

A slim tensioned pleated blind with recessed grips The S-Plissee SMART has slim rails and is operated by recessed grips rather than add-on handles. Both the top and the bottom rail slide freely, so you decide which part of the window stays open and where you want privacy. The VS 2 SL is designed for the window sash. The VS 2 SL Loggia version is fixed with a mounting profile to frameless balcony and patio glazing. Rails are available in white, grey or black. A few fabrics are only available in smaller sizes – the configurator points this out. Size: up to 120 cm wide and 230 cm high; Loggia 30 to 100 cm wide (finished size) Versions: VS 2 SL for window sashes, VS 2 SL Loggia for frameless glazing Fitting for VS 2 SL: tension shoes or wall brackets, as well as glazing-bead brackets, clamp brackets, “Slim” clamp brackets or adhesive profile Operation: recessed grips, top and bottom rail slide freely Fabrics: 418 fabrics and colours; rails in white, grey or black

A tensioned pleated blind that moves freely along your window This pleated blind is held between a top and a bottom rail fitted directly to the window. With the ESG 2 both rails slide freely, so you can uncover the window from the top or from the bottom, just as you need. On the ESG 1 the top rail stays in place and only the bottom rail moves. For day and night use, the ESG 3 and ESG 50 combine two fabrics – for example a translucent one and a blackout one. For a drill-free fit, choose clamp brackets, adhesive plates or the ESC 2 with an adhesive profile for glass or frame (not wood). The cords are colour-matched to the fabric. Size: up to 200 cm wide and 240 cm high, minimum 20 cm (finished size) Versions: ESG 1, ESG 2, ESG 2 ML, day and night ESG 3 and ESG 50, ESC 2 with adhesive profile Fitting: retaining clip and tension shoe or angle brackets; clamp, glazing-bead, flat and edge brackets or adhesive plates are also available Fabrics: 763 erfal pleated fabrics Some fabrics have smaller maximum sizes, shown when you choose the fabric

These triangular pleated blinds can also be made in DUETTE fabric. Fabric without punched holes. Please enquire. Configure Cosiflor special shapes made to measure in our shop. Choice of ceiling brackets or wall angle brackets Your measurements then provide all the information needed for production. Slope SD1 Slope SD2 When fitting on the frame, please add the overlaps. The triangular shape must be measured again on the frame. Slope SD3 Slope SD4 These blinds are fitted with clips or angle brackets directly under the glazing bead or onto the window frame. Particularly suitable for conservatories or triangular windows. They are operated by a cord pull on the high side. Installation is really easy. All accessories are included. All aluminium rails are available in silver grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown.