Skip to main content Skip to search Skip to main navigation
Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
made to measure

Made-to-measure roller shutters

Made-to-measure roller shutters for windows and doors. From Reflexa come the made-to-measure roller shutter up to 260 cm wide and the AsyRoll sloping and combination roller shutters.

Roller doors, roller grilles and carport roller doors are in their own section, Roller doors.

  • Made to the millimetre
  • Free shipping within Germany (except islands)
  • Instant price in the configurator
Roller shutters 4,83★★★★★
282 reviews

Subcategories

Our models

Filter products
Combination roller shutter AsyRoll SE
Combination roller shutter AsyRoll SE

Every Reflexa® combination roller shutter comes with motor drive and is technically identical to the AsyRoll sloping roller shutter. Order online from us, made to measure. Colours, box shapes and slats are matched exactly to the main roller shutter. It is therefore available with a square or round box and a curtain with light slots. It is measured like a single roller shutter. Outer edge of guide rail to outer edge of guide rail = order width When combined with the sloping unit, the two guide rails are fitted back to back. Top edge of box to bottom edge of bottom rail = order height. You can order the sloping roller shutter here: Sloping roller shutter AsyRoll Comfort

Regular price: From €667.61
Reflexa made-to-measure roller shutter up to 260 cm wide
Reflexa made-to-measure roller shutter up to 260 cm wide

Configure Reflexa roller shutters (Heroal system) in our shop and buy them made to measure online. High quality, made in Germany. Roller shutter box shape rectangular with a 28 degree bevel at the front as standard, or a round box at no extra charge. Aluminium curtain available at a 35% surcharge (all HEROAL® system) All guide rails (22 mm deep x 53 mm wide; with integrated insect screen roller 40 mm deep x 53 mm wide) have a rubber piping insert for quiet running of the curtain. Strap operation (or Elero® or Elero 868 ® motor and remote control at a surcharge). Supplied as standard with strap pull (possible up to 4.3 m²), strap guide roller and screw caps. The rails are supplied undrilled or drilled. Fixing screws for the building structure are not included. We cannot give a guarantee for PVC units larger than 3.5 m². Combination roller shutters with a double guide rail are pre-assembled with a continuous pelmet and delivered in one piece. Box and rail colour available in any colour at no extra charge The PVC curtain is a hollow-chamber profile, 37 mm high x 8.5 mm thick. The aluminium curtain is a foam-filled, insulated profile, 37 mm high x 8 mm thick. For the colour range see above. The configurator shows the matching box size automatically under “Your selection”. It depends on height, curtain and drive (Reflexa table 2026). Now also available with a spring-loaded insect screen roller. An additional roller is fitted at the top of the box. The guide rails then have a double track (towards the inside for the insect screen roller, outside for the roller shutter) For the surcharge for an integrated insect screen roller, see configuration. (including double guide rails and accessories) Standard roller shutter or roller shutter with fly screen. All roller shutters are available made to measure with either strap pull or motor drive. The roller shutters have passed a hail impact test. According to Reflexa, its roller shutters are made in Germany. Order in our shop and configure what you need. We also deliver to Austria, Switzerland and other selected EU countries.

Regular price: From €193.23
Sloping roller shutter Reflexa® AsyRoll comfort
Sloping roller shutter Reflexa® AsyRoll comfort

Sloping roller shutter AsyRoll Comfort, available up to 274 cm wide. Buy Reflexa shading for sloping windows online.The AsyRoll 4.0 sloping roller shutter is the asymmetric roller shutter from Reflexa®. This solution for shading sloping windows is extremely versatile and has been refined several times over the years. Motor drive as standard. HSM curtain type HSM37 (37 mm face width), double-walled, foam-filled aluminium hollow-chamber profile with light slots. Guide rails 7 cm wide; the box height depends on the manufacturing dimensions of the roller shutter unit.Summary and details:Sloping roller shutters are an effective way to protect asymmetric glass façades from sun and heat. Reflexa has been a pioneer in developing and refining these products for decades. You can order AsyRoll roller shutters, commonly known as sloping roller shutters, online at Sonnenschutzshop24. Together with Reflexa, we have been supplying end customers and retailers with high-quality sun protection products since 1999. These sloping roller shutters can also be made as triangular units or combination systems. We are also happy to discuss your plans by phone.Technical and roller shutter notes:For technical reasons, part of the curtain always remains visible when raised. All corner slats and the top 10 roller shutter slats are always without light slots. Always motor-operated.AsyRoll shading specification- excellent weather protection and insulation (protection against heat and cold) - filled with special foam - pelmets with additional mitre cut for round and square combinations - guide rails of extruded aluminium with plastic keder and brush seal - profiles of double-walled, calibrated aluminium - cross rail of extruded aluminium - fully enclosed 3- or 4-part box of extruded aluminium - can be made for angles of inclination up to 45° - also available with radio-controlled solar drive (no cabling or mains connection) - restriction: rails and box must not be plastered into the façadeAngle restrictions for manufacture:Or as a sloping roller shutter combination. Can be fitted in the recess or in front of the recess. Colour choice for roller shutter curtain type HSM 37, face 37 x 8 mm, followed by the box shapes (box sizes are matched to the roller shutter heights. Boxes are available in 16.5 cm, 18 cm and 20.5 cm heights) Boxes and rails come as standard in white RAL 9016, brown RAL 8019, silver RAL 9006 and anodised C 0. Special colours available at extra cost, see configurator. Box shape semi-circular or square with bevelled front at no extra charge. The guide rails are 7 cm wide and 4 cm deep. You can order the straight combination roller shutter to go with the sloping roller shutter here: AsyRoll SE combination

Regular price: From €1,764.15
More about Roller shutters

Hotline +49 9732 3023858

Dear prospective customers,

due to the large number of suppliers, we are receiving more and more questions, which we would like to answer briefly here in advance.

Certification:

Roller doors must be certified by a system provider. If the system provider is based outside Germany, the certification must comply with EU requirements (valid throughout the EU).

Anti-fall device:

Doors with a curtain weight of more than 20 kg must be fitted with an anti-fall device, or there must be explicit certification that the weight is below 20 kg and has been technically tested accordingly (see DIN EN 12604). For roller doors, an anti-fall device is not an option but an obligation.

Motor manufacturers:

All our doors are fitted with a high-quality tubular motor from the German manufacturer BECKER® or RADEMACHER®. Likewise, we use BECKER® controls exclusively.

OSE bottom rail with electronics (opto-sensor bottom rail):

All roller doors with radio remote control that are publicly accessible, as well as commercial doors, must have a so-called OSE bottom rail with electronics. With every movement of the door, this electronic safety device checks whether there are obstacles in the door area below before the door rolls down.

Roller door curtains:

There are not very many certified roller door curtains in Germany. As a rule, there are 2 different curtain sizes. One is, for example, the profile H 55 (e.g. names at HEROAL). These are usually 55 mm high (curtain height without hook) and 14 mm in face depth. All profiles are only tested and approved up to certain sizes.

Smaller profile sizes, such as the frequently offered profile AS or RP 52, are mostly ordinary roller shutter profiles without roller door certification.

Larger roller doors use, for example, profile 75, which can be used for door widths of at least 600 cm. The profile dimensions here are 75 mm high and 20 mm face depth according to DIN, with a weight of 5.7 kg per square metre.

Face depth means that the spatial thickness of the profile (measured at the highest point on a flat surface) shows this dimension. As the profiles must be able to roll up, the face depth cannot mean the continuous thickness (like a block) of the curtain profile.

All curtains are made of aluminium and foam-filled (insulated) free of CFCs.

You can buy these selected roller door types and versions from us online at a favourable price:

  • Certified without anti-fall device and with a curtain weight below 20 kg, profile H55 roller door HRT05
  • Above that, with profile H55 and anti-fall device, door H55
  • Roller door – roller shutter Rollux 55
  • Roller door Rollux 77
  • Doors up to 620 cm wide, profile RD75 without box
  • Doors up to 600 cm wide, profile RD75 with box
  • Heroal roller shutters
  • Replacement curtains
  • Roller grilles
  • Sloped roller shutters
  • XXL roller shutters

Your Sonnenschutzshop24 team

You can configure Heroal® roller shutters, roller doors and roller grilles with us at a fair price for quality. Certified products made in Germany, using German drive technology from BECKER® and RADEMACHER®, complete this product family.