erfal pleated blinds

A tensioned pleated blind with concealed cords On the FSG 2 the cords do not hang loose – they run out of sight in side rails. This keeps them out of reach of small children; according to erfal, the cord guide complies with EN 13120. The side rails have another benefit: very little light gets in at the edges. Both the top and the bottom rail can be moved. The blind is screwed in place – in the window recess, on the reveal or on the window or door frame. If you need a different fixing, please add it under “Notes”; other options are available on request. Size: 20 to 120 cm wide, 20 to 230 cm high (finished size) Operation: top and bottom rail adjustable Cords: concealed in side rails, to EN 13120 according to erfal Fitting: screwed into the recess, onto the reveal or onto the frame Fabrics: 761 erfal pleated fabrics; some fabrics only in smaller sizes

A pleated blind in a magnetic frame – fitted without drilling With Easy Frame, you stick a self-adhesive steel strip onto the window sash, and the magnetic frame with the pre-installed pleated blind holds onto it. There is no drilling or screwing, and the frame can be taken off at any time in one move. The frame holds either an ESG 1, an ESG 2 or the slim S-Plissee VS 2 ML. The frame is available in 5 colours. In the configurator you specify whether your measurements refer to the outer edge of the magnetic frame or to the clear sash opening. Size: 20 to 150 cm wide, 20 to 200 cm high; ESG over 120 cm wide up to 180 cm high Versions: ESG 1, ESG 2 or S-Plissee VS 2 ML in a magnetic frame Fitting: stick the steel strip onto the sash, attach the frame – no drilling Frame: 5 colours Fabrics: 763 erfal pleated fabrics

A free-hanging pleated blind for large windows and doors This pleated blind is fixed only at the top and is lowered like a roller blind. That makes it a good fit for large windows and doors, where a tensioned blind would be awkward to operate. A pull cord is the simplest option; on large, heavy blinds a chain is more comfortable. The FG spring-loaded version needs no cord at all, which makes it a sensible choice for children's rooms. With a battery motor you operate the blind using the remote control supplied and recharge it via USB. The top-down versions ESS 5 and ESM 5 also open from the top, so the lower part keeps its privacy while daylight comes in above. For tilting or slightly inclined windows, a tension-wire guide on both sides stops the blind from swinging. Size: up to 280 cm wide and 260 cm high, depending on version (finished size, minimum 20 cm) Versions: ESS 1, day and night ESS 3, top-down ESS 5, chain ESB 1, spring-loaded FG, battery motor ESM 1 and ESM 5 Fitting: retaining clips on wall, ceiling or window frame, angle brackets or clamp brackets with no drilling; FG with wall/ceiling brackets Fabrics: 762 erfal pleated fabrics

One pleated blind for large window fronts up to 3.60 m The L-Plissee is designed for large windows: up to 300 cm wide with cord operation and up to 360 cm with a battery motor, in each case up to 300 cm high. Besides the standard 20/25 mm pleat, there is the 32 mm Maxi pleat and the 64 mm XL Maxi honeycomb. The LSC 1 is tensioned and operated by a continuous cord at the side; the LSC 5 hangs freely and has a central pull cord. On the LMB 5, the Bliss battery motor does the work, with charger and remote control available on request. It is fitted with a wall bracket and clip to the ceiling or wall. Depending on fabric and area, tighter limits may apply – every order is checked before production. LSC 1: 45 to 300 cm wide, 25 to 260 cm high (finished size) LSC 5: 55 to 300 cm wide, up to 300 cm high LMB 5 with battery motor: 50 to 360 cm wide, 45 to 300 cm high Pleat size: 20/25 mm, Maxi 32 mm or XL Maxi honeycomb 64 mm Fabrics: 729 erfal fabrics; rails in white, black or grey

A pleated blind for conservatories, sloping ceilings and horizontal glazing This plafond pleated blind is made for glass surfaces that are sloping or horizontal – in a conservatory as well as under a sloping roof. It is installed tensioned and can be up to 150 cm wide and 400 cm long. There are three ways to operate it: the WG 1 is moved with a handle, the WK with a crank or an electric rod, and the WM runs on a battery motor. It is fixed with a retaining clip or angle bracket. Mounting profiles, mounting brackets and the hand crank or electric rod for the WK are available on request – please mention this under “Notes”. Size: up to 150 cm wide and 400 cm long (finished size); minimum width WK 20 cm, WG 1 30 cm, WM 50 cm Operation: handle (WG 1), crank or electric rod (WK), battery motor (WM) Fitting: retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 790 erfal pleated fabrics

A plafond pleated blind for conservatories with special shapes This tensioned plafond pleated blind is designed for sloping and horizontal glass surfaces in trapezoid, triangular, pentagonal or hexagonal shapes – in conservatories as well as under sloping roofs. Triangles are also available as a fixed version. It is operated by a handle on the top or middle rail, with an operating-rod grip available if you prefer. To measure, you need the width and height of the finished blind and, depending on the shape, the smaller width or smaller height. Please describe a dimensioned sketch under “Notes”. The angles of the slopes must lie within the stated range; every sketch is checked before production. Size: EWG 50–53 up to 150 cm wide (EWG 53 up to 120 cm) and up to 150 or 200 cm long; EWG 54–56 up to 150 cm wide and 400 cm long Fixed: EFW 1/2 up to 180 or 200 cm Operation: handle on the top or middle rail, operating-rod grip available Fitting: “small” retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 686 erfal pleated fabrics, 5 profile colours

A slim tensioned pleated blind with recessed grips The S-Plissee SMART has slim rails and is operated by recessed grips rather than add-on handles. Both the top and the bottom rail slide freely, so you decide which part of the window stays open and where you want privacy. The VS 2 SL is designed for the window sash. The VS 2 SL Loggia version is fixed with a mounting profile to frameless balcony and patio glazing. Rails are available in white, grey or black. A few fabrics are only available in smaller sizes – the configurator points this out. Size: up to 120 cm wide and 230 cm high; Loggia 30 to 100 cm wide (finished size) Versions: VS 2 SL for window sashes, VS 2 SL Loggia for frameless glazing Fitting for VS 2 SL: tension shoes or wall brackets, as well as glazing-bead brackets, clamp brackets, “Slim” clamp brackets or adhesive profile Operation: recessed grips, top and bottom rail slide freely Fabrics: 418 fabrics and colours; rails in white, grey or black

A tensioned pleated blind that moves freely along your window This pleated blind is held between a top and a bottom rail fitted directly to the window. With the ESG 2 both rails slide freely, so you can uncover the window from the top or from the bottom, just as you need. On the ESG 1 the top rail stays in place and only the bottom rail moves. For day and night use, the ESG 3 and ESG 50 combine two fabrics – for example a translucent one and a blackout one. For a drill-free fit, choose clamp brackets, adhesive plates or the ESC 2 with an adhesive profile for glass or frame (not wood). The cords are colour-matched to the fabric. Size: up to 200 cm wide and 240 cm high, minimum 20 cm (finished size) Versions: ESG 1, ESG 2, ESG 2 ML, day and night ESG 3 and ESG 50, ESC 2 with adhesive profile Fitting: retaining clip and tension shoe or angle brackets; clamp, glazing-bead, flat and edge brackets or adhesive plates are also available Fabrics: 763 erfal pleated fabrics Some fabrics have smaller maximum sizes, shown when you choose the fabric