Patio & balcony

• up to 550 × 300 cm
• crank, motor, radio or solar
• optional Duomatic: tilt up to 55° by crank

• up to 550 × 300 cm
• motor, radio or solar
• 14 cm high cassette

• up to 550 × 300 cm
• crank, motor, radio or solar
• 13 cm flat cassette

• up to 700 × 400 cm
• crank, motor, radio or solar
• no visible screw fittings, optional Duomatic

• up to 700 × 400 cm
• crank, motor, radio or solar
• also with crossed arms or vario valance

Buy the extremely sturdy Reflexa® drop-arm awning in our shop. The sturdy drop arms provide stability, and the internal springs ensure optimum fabric tension. This allows a maximum width of 500 cm and a maximum extension of 150 cm. The standard extension angle is 90 degrees. For an angle of up to 120 degrees (surcharge), the fabric is made longer. Three different projections are available: 100 cm, 125 cm and 150 cm. The fabric selection is available in the configuration. Reflexa® fabric collection, 295 g/m², lightfast, Teflon-coated, high quality. Wall, ceiling and recess fitting (recess brackets at extra cost) is very quick: the awning is simply hooked onto brackets already fixed on site. All RAL frame colours at no extra charge, including white, silver, brown, anthracite, DB 703 etc. Supplied without valance as standard; a valance is available at extra cost. Choice of crank or motor drive. A rain canopy is available as an option; it is supplied with side caps and approx. 5 cm wider than the awning width. Free delivery within Germany with a Reflexa® works vehicle. Ceiling and wall brackets included, but without fixing screws into the building structure. Intermediate sizes are charged at the next higher table price, with no surcharge. Can be made accurate to the millimetre. All prices are delivered prices for self-installation, i.e. free delivery within Germany. Configure your new drop-arm awning in our shop and order with free shipping. Delivery to the EU and Switzerland is possible at extra cost.

• up to 700 × 350 cm
• crank, motor, radio or solar
• optional vario valance up to 600 cm wide

With the Bella Lamella louvred roof from Reflexa®, your patio becomes a place you can use all year round – even in winter. The sturdy aluminium frame carries rotating louvres: closed, they keep out rain, wind and snow; open, they let in light and fresh air. The louvres open up to 110°, and the motor lets you set them exactly as you need shade and brightness. Made to your measurements 1-bay system from 200 to 400 cm wide, 2-bay system from 400 to 800 cm, 3-bay system from 600 to 1,200 cm Projection 200 to 600 cm, system height up to 300 cm Snow and support load up to 112 kg/m² (largest system, louvres closed), wind resistance class 6 Free-standing or on the house wall Free-standing, the roof stands on posts with base plates. On the house wall it is fixed with wall consoles or wall brackets – at the back, front, side or around a corner; posts are then omitted on the wall side. Rainwater drains through the built-in gutters and is led down through the post profile. Operation and equipment Electric drive as standard, wired with 5 m cable bidirectional radio 868 (Combio 868) or io (Pergola Slim Receiver io) on request, with matching hand transmitters LED strip on two or four sides and LED spots in the louvres for atmospheric evenings S1 patio heaters, also with dimmer module, for cooler days additional posts along the longitudinal beam Colours Eight standard colours in matt fine texture: traffic white (RAL 9016), white aluminium (RAL 9006), grey aluminium (RAL 9007), anthracite grey (RAL 7016), slate grey (RAL 7015), micaceous iron anthracite (DB 703), grey brown (RAL 8019) and moss green (RAL 6005). The fine texture is more resistant to scratches and abrasion than gloss or smooth matt finishes – an advantage on large surfaces in particular. Tip on orientation When planning, consider which direction the roof faces and at what time of day you want to use the space. If the sun comes from the front when the louvres open, it shines directly underneath; if it comes from behind, you only get indirect light. For wall mounting, this decides whether the louvres run parallel or at right angles to the wall. We are happy to advise you.

Another vertical awning for wall fitting, particularly suitable for fitting under a roof, available from us. As there is no cassette, it can be made in one piece up to 500 cm wide x 300 cm high. With motor or crank drive. The brackets and drop bar can be ordered in any RAL colour at no extra cost. The tension cable is fixed backwards with a tensioning bracket or downwards with a tensioning block. Simple technology and great practical value are what set this vertical awning apart. Order width = outer edge of bracket to outer edge of bracket. Order height = top edge of bracket to bottom edge of the awning drop bar.

Side privacy and sun protection for balconies and terraces The Reflexa® wall-mounted folding screen is fixed to the house wall and opens like a fan. It shades from the side and blocks views, even where there is no room for an awning. When you don't need it, fold it up and it lies flat against the wall. The two-part bracket is fixed to the wall with four screws. A side bracket for recess mounting is available at extra cost. The handle is on the right as standard and can be moved to the left. Supplied Folding screen, bracket in RAL 9010, 8022 or 9006, zipped protective cover in white, beige or grey for the cold season, awning fabric from the plain collection, operating instructions. Fixing material is not included, as it depends on the wall. Height and projection: 100 to 225 cm, projection angle 90°. From 200 cm height the fabric panels have a horizontal seam. Every screen is made to measure.