Conservatory & glass roof

With lateral zip fabric guide using a zip system for optimum fabric tension. The fabric is tensioned on all sides. Single units can be made up to 600 cm wide with a 500 cm projection. Configure the Reflexa® LifeSmall Zip in our shop and order online. Also available with a Variovolant on request. Another option for shading a glass roof from below is the more economical standard under-roof awning. Key features: - electric motor as standard (crank drive not possible) - optionally radio-controlled with either a wall transmitter or a hand transmitter - optionally with bidirectional radio (Somfy iO standard) - iO allows integration into a smart home system and operation via the Somfy app - lateral zip guide of the fabric into the guide rail - optionally with D-valance (Variovolant, extendable up to 150 cm by crank) - choice of 650 colours for cassette and frame – at no extra charge - the installation height including cassette is only 16.4 cm The picture shows an under-glass awning with extendable Variovolant. The valance is attached to the front profile. The picture shows the front end profile without Variovolant. The picture shows the zip system connecting the fabric to the rail, viewed from below. Smooth running and precise guidance. The order width is always the centre-to-centre dimension, see measuring help. This corresponds to the centre of the fixing point of the guide rail brackets. The projection is the narrowest installation dimension in the direction in which the fabric extends, minus 2 cm. Advantages of a zip awning: - optimum fabric tension - no light gaps at the sides - can be made specially and exclusively as an under-glass awning with an additional Variovolant This system is also available as a 2-part shading unit.

A pleated blind for conservatories, sloping ceilings and horizontal glazing This plafond pleated blind is made for glass surfaces that are sloping or horizontal – in a conservatory as well as under a sloping roof. It is installed tensioned and can be up to 150 cm wide and 400 cm long. There are three ways to operate it: the WG 1 is moved with a handle, the WK with a crank or an electric rod, and the WM runs on a battery motor. It is fixed with a retaining clip or angle bracket. Mounting profiles, mounting brackets and the hand crank or electric rod for the WK are available on request – please mention this under “Notes”. Size: up to 150 cm wide and 400 cm long (finished size); minimum width WK 20 cm, WG 1 30 cm, WM 50 cm Operation: handle (WG 1), crank or electric rod (WK), battery motor (WM) Fitting: retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 790 erfal pleated fabrics

A plafond pleated blind for conservatories with special shapes This tensioned plafond pleated blind is designed for sloping and horizontal glass surfaces in trapezoid, triangular, pentagonal or hexagonal shapes – in conservatories as well as under sloping roofs. Triangles are also available as a fixed version. It is operated by a handle on the top or middle rail, with an operating-rod grip available if you prefer. To measure, you need the width and height of the finished blind and, depending on the shape, the smaller width or smaller height. Please describe a dimensioned sketch under “Notes”. The angles of the slopes must lie within the stated range; every sketch is checked before production. Size: EWG 50–53 up to 150 cm wide (EWG 53 up to 120 cm) and up to 150 or 200 cm long; EWG 54–56 up to 150 cm wide and 400 cm long Fixed: EFW 1/2 up to 180 or 200 cm Operation: handle on the top or middle rail, operating-rod grip available Fitting: “small” retaining clip or angle bracket; mounting profiles and brackets on request Fabrics: 686 erfal pleated fabrics, 5 profile colours

Plafond under-roof pleated blinds are a good alternative to typical roof-mounted conservatory shading. This conservatory shading is very easy to fit and very durable. The high-quality Cosiflor rail system adapts to almost any fitting situation. All fitting accessories are supplied. Choice of ceiling brackets or wall adapter angle brackets These blinds are fitted directly under the glass using clips or angle brackets. Particularly recommended for conservatory roofs. They are operated with a sliding rod. This type of shading is practical and good value when you compare external sun protection systems with these pleated blinds. Fitting really is simple, and all accessories are supplied. The fabric is self-tensioned and also has steel cables between the rails, which can be adjusted during fitting. This design always achieves optimum tension across the blind, so the fabric does not sag even over long lengths. All aluminium rails are available in silver-grey, white, bronze or black-brown. The matching PVC parts are available in grey, white and black-brown. Here are a few examples of other ways PL11 roof systems can be used:

Order and buy the Reflexa® LifeSmall under-roof awning up to 600 cm wide x 450 cm projection in our shop. Delivery to Switzerland and Austria is available. An under-roof awning is designed for situations where fitting over or on top of the roof is not possible for technical reasons. The LifeSmall is simply fitted underneath an existing roof structure, so the fabric is not exposed to dirt, wind load or moisture. A finished under-roof awning. The corner end profile runs right through to the end. - Standard frame colours white RAL 9016, silver RAL 9006, grey-brown RAL 8019, 3 grey metallic shades and any other RAL colour. All special colours at no extra cost - Somfy or ELERO motor fitted as standard - can also be operated by crank at a reduced price - high-quality awning fabric from the Reflexa® collection - from 450 projection = fabric support wire included to prevent the fabric from sagging - cassette height only 14.8 cm On awnings over 400 cm wide or 250 cm projection, increased and possibly noticeable sagging of the fabric may occur. This reflects the current state of the art and does not affect the function or use of the awning. In borderline cases, an additional fabric support wire can counteract this. (option in the configurator) (the centre distance varies depending on the drive, see drawings) Fitting on beams with crank drive TOP picture --- fitting on beams with motor drive. The minimum distances refer to the positions of the mounting brackets on the awning box. Measuring the projection for all types of fitting: - rear edge of universal bracket at the back of the awning box to front edge of guide rail (for recess fitting, we recommend deducting 1 - 2 cm) Measuring the width when fitting with reveal brackets: - inner edge of reveal to inner edge of reveal minus 8 cm for crank drive and minus 6 cm for motor drive (this is also the centre distance) Detail of the side guide rails and the end profile. Outside and inside view. Here you can see the rail holder and, below, the available reveal brackets. Summary of product features This under-roof awning is identical in construction to the T200 under-glass awning from the system supplier Varisol. You can configure this interior conservatory shading online and order it in our shop. In certain situations it may be necessary to split the awnings and fit them side by side. Coupled under-roof awnings are not possible for technical reasons. The price of this conservatory shading always depends on the width and projection. Another form of under-roof sun protection is the Plafond PL 11 pleated blind, which shades individual panes at low cost. Unlike the under-glass awning, the pleated blinds are operated with a hand operating rod. If you have any questions about the best shading for your property, we are happy to help by phone. For external conservatory shading, choose the Life conservatory awning For conservatory shading with variable guide rails for special shapes or sloping shading, choose the LifeFlex conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

Full-surface shading from Reflexa® for conservatory roofs, with no light gaps at the sides thanks to zip technology. The zip-like system prevents the awning fabric from sagging at the sides. Larger areas up to 12 m wide are possible, and the awning can also be used in locations exposed to wind. Configure and order this conservatory shading in our shop. Features and product details: - Somfy electric motor as standard - optional radio control with wall or hand transmitter - optional bidirectional radio for smart home integration and operation via app - zip side guides with no light gaps at the fabric - protective cover for the drop bar when retracted (closed cassette) - choice of 650 colours for cassette and frame – at no extra cost - brackets / mounting feet included - housing height only 144 mm - max. width 12 metres - single units up to 6 metres wide; wider only as coupled systems (on request) - large choice of fabrics Precise fabric guidance in the side rails thanks to the zip system. Standard spacer height = 10.5 cm (also available in 15 and 20 cm heights at extra cost)

The versatile Reflexa® Life conservatory awning, made to measure up to 1200 cm wide and 600 cm projection – configure and buy online. An ideal roof-mounted awning for conservatory shading, providing sun and heat protection. The Reflexa® LIFE conservatory awning stands out above all for its good value for money, high functionality and ease of fitting. The fabric is tensioned by a strap counter-tension system. The tension can easily be readjusted if required. Standard cover made of high-strength, rot-proof original awning fabric, spun-dyed, Teflon-coated, 295 grams per square metre, Reflexa® collection. Alternatively, all special collections ALL-WEATHER, LUMERA, GROOVE are available at extra cost. Soltis 92 on request (only up to 400 cm wide and 400 cm projection per bay) The fabric collection is available in the configurator. Key data: - cassette size 20.2 cm wide x 17.4 cm high - installed height = at least 18.9 cm - guide rails with rain drainage channel - fitting dimension from outer edge of cassette to centre of mounting foot = 3.2 cm - mounting foot dimensions = 4.5 cm wide x 9.4 cm long (fixed via slotted holes) - standard mounting foot height = 12 cm - all screw fixings in stainless steel - SOMFY or ELERO motor drive as standard - radio-controlled motor, wind sensor etc. available at extra cost - motors and controls are supplied by the manufacturer SOMFY or ELERO - very modern design - from 401 cm projection, a horizontal wind load support is fitted under the fabric (prevents the fabric from sagging) - competitive price, clean, high-quality workmanship from the German manufacturer Reflexa® - systems up to 1200 cm can be ordered (coupled from 601 cm, always with 2 drives) - awning covers sewn with special TENARA® thread (highest tear resistance) - The frame is offered in any RAL colour at no extra charge. Choose from 600 colours, exclusively from Reflexa. Number of spacers: - up to 250 cm projection = 2 spacers per side - up to 500 cm projection = 3 spacers per side - up to 600 cm projection = 4 spacers per side The cassette side caps and the guide rail end caps are available in 7 different colours (see configuration) Measuring guide for a coupled system: From a width of 601 cm, this awning is supplied as a coupled system. At the coupling point = guide as a double rail. Coupling dimension measured in cm from the drive side, viewed from outside looking at the conservatory (house wall). For a coupled version, please state the overall width from outer edge to outer edge of the conservatory (overall centre-to-centre dimension is overall width - 64 mm) and the coupling dimension (from the outer edge of the conservatory to the fixing dimension at the centre of the beam at the coupling point), in each case viewed from the drive side. Conservatory awnings ensure an ideal room climate in the conservatory. We offer various conservatory awnings that can be mounted on top of the roof or under the roof. You can easily order conservatory shading from us online. Our configurator helps you with the ordering process. Coupled systems are possible up to an overall width of 12 metres. Configure your conservatory awning and see a competitive online awning price. For interior shading of a conservatory as an under-roof awning, choose the LifeSmall conservatory awning For shading a conservatory with adjustable guide rails for special shapes or sloping shading, choose the LifeFlex conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

The adaptable LifeFlex conservatory awning for fitting on domed roofs or special shapes up to 600 cm wide and 500 cm projection – buy online in our shop configurator. This conservatory awning was developed specifically for special shapes in conservatories. The REFLEXA® LifeFlex can be fitted in many ways because the guide rails can be adjusted sideways. This means the fitting surface is no longer rigidly fixed; fitting can also be asymmetrical on existing beams. The patented tensioning system works independently of the drive system. The hem of the awning cover is double-stitched at the sides for reinforcement. In addition to the lateral adjustability, the overhang at the front can be up to 100 cm. The frame is offered in any RAL colour at no extra charge. Choose from 600 colours. Standard cover made of high-strength, rot-proof original awning fabric, spun-dyed, Teflon-coated, 295 grams per square metre, Reflexa® collection. Alternatively, all special collections ALL-WEATHER (max. 350 cm projection), LUMERA, PERFORA, Tempoteststar etc. are available at extra cost. Soltis 92 (only up to 500 cm wide) A high-quality SOMFY or ELERO motor is fitted as standard. We therefore need the following details for your order: - overall box width as per sketch - overall projection as per sketch (the front profile of the awning ends approx. 10 cm before the end of the rail) - rail fixing dimension = centre-to-centre dimension, centre of rail to centre of rail (minimum = half the box width) - the distances to the guide rails on the right and left may differ. The preset rail fixing dimension can be shifted on site. Maximum box width is 600 cm Side view details and number of spacers Standard spacers with slotted holes for flexible fitting included (see picture above). Taller spacers can be selected in the configurator (see picture below). Roof-mounted awning design with the option of fitting the guide rails offset. Configure the fully protected LifeFlex awning online here in our awning shop. Designed specifically for domed roofs or sloping conservatories. Always with a high-quality Somfy motor drive, electrically operated. Asymmetrical roofs are no problem for this special awning – the adjustable rail fixing makes it possible. Interior shading of a conservatory as an under-roof awning, choose the LifeSmall conservatory awning For exterior shading of a conservatory, choose the Life conservatory awning For free-standing conservatory-style shading without a glass roof, choose the Viladora pergola awning

Configure the Viladora pergola awning made to measure and buy it easily in our shop. Max. width 600 cm and max. height / projection 600 cm. This new development from Reflexa® impresses with its simplicity on the one hand and a very high quality standard on the other. The frame is available in 7 frame colours at no extra cost. A SOMFY electric motor is part of the standard version. The scope of delivery is as follows: - awning cover from the entire high-quality acrylic fabric collection - fabric seams sewn with Tenara thread are standard on all REFLEXA® awnings - radio-controlled motor version with SOMFY hand transmitter and receiver - standard frame colours: brown RAL 8019, anthracite RAL 7016, silver RAL 9006, natural white RAL 9010, traffic white RAL 9016, anthracite metallic DB 703 or dark brown shade 8077; any other RAL colour at no extra cost - roof posts 3 metres long (can be shortened) - 2 wall brackets for the cassette - 2 floor mounting plates The centre distance of the support posts at the floor (see picture) is = minus 47 mm per side. A sectional drawing of the Viladora. A wind load support is fitted as standard from a width of 401 cm or a projection of 301 cm. Also available with the vertical zip awning type FenMa Zip, mounted directly on the support profiles. The ideal interior shading for a conservatory is the under-glass awning Life Small from Reflexa. For external conservatory shading, choose the conservatory awning Life For conservatory shading with variable guide rails for special shapes or sloping shading, choose the conservatory awning LifeFlex