Accessories and spare parts for your sun protection

Original Baier accessories for roof window roller shutters: spare cranks, switch/transformer unit and radio receiver for 24 V, push button, radio receiver and separating relay for 230 V, mounting frames for flush and surface mounting, and radio hand transmitters (868.3 MHz) for one, four or 24 shutters or groups.

Erfal roller and pleated blinds with eACCU battery motor (EAM series) run without power cables. Here you will find the accessories: a second remote control, a wall transmitter with display, the app box for smartphone control, a light sensor and everything for charging. The remote controls and the wall transmitter come with a magnetic wall holder and use 433.92 MHz. The app box connects to your router via LAN or Wi-Fi (2.4 GHz); USB-C cable and power supply are included. The light sensor sticks to the window with a suction cup and has four brightness levels – it does not fit the ESM5 top-down motor. The top-down motor has its own two-way remote control. Charging is via USB-C: with power supply and 3 m charging cable, or permanently with the solar panel (550 × 65 mm, 4.7 W, IP55, indoor and outdoor). For several EAM24-Matter systems there is a group power supply for up to five systems. For vertical blinds with Bliss battery motor: Bliss 5-channel remote control and USB-C charger with 5 m cable.

Reflexa® replacement awning fabrics are always charged per square metre. All fabrics have a water-repellent (Teflon) finish. They are acrylic fabrics weighing approx. 290 g/m². You can order the valance straight or scalloped. Example calculation and measuring: fabric width e.g. 396 cm, projection (height) 203 cm + valance 19 cm high = order width 396 cm x order height 222 cm Shipping throughout the EU. The hems (into which the existing PVC cord/keder is inserted) are made 2.5 cm wide as standard. If you need a different size, please let us know as a special request. The full fabric selection can be found in the configuration. - plain fabrics - block stripes - multi-stripes

Buy made-to-measure replacement roller door curtains from system manufacturer Heroal, with free shipping. Here you can order HEROAL replacement curtains for roller doors. We offer 3 different curtain types for different applications. The maximum sizes for each are listed in the configuration. The curtain is delivered with steel suspension springs and pre-locked. The curtain is finished at the bottom with a thin rubber lip on the RS52 and a thick OSE rubber lip on the RD75. Everything is made to measure and ready to install. Largest application size = 550 cm wide by 450 cm high The following colours are available: Or 11 profile colours coated in special RAL colours, at NO extra cost: Simply order your roller door curtain or replacement curtain in our shop, made to measure in a wide choice of colours and curtain types.

Replacements for the small parts a tensioned pleated blind needs: handles for moving it, tension shoes and brackets with cover cap for fixing it. For blinds out of reach there is the operating rod with a mount for the folding handle. Handles come in white, ivory, grey, black, beige, light brown, brown and dark brown; tension shoes and brackets also in wood tones. The parts come in packs so that shipping pays off. The operating rod is charged per running metre. Made for Omnisol pleated blinds; for other makes please ask us first: +49 9732 3023858.

Don't want to drill into your window frame? Omnisol has several solutions. Clamp holders are the most popular option for PVC windows: they clamp onto the window sash and the tension shoes attach to them. For very narrow or rounded glazing beads there are adhesive mounts, for straight or slightly sloping beads adhesive plates – both hold with special adhesive pads, and the blind then runs in the glass rebate directly in front of the pane. Adhesive mounts can be removed if needed. Glass clips slide between glazing bead and pane; they can also be removed. Adhesive rails are self-adhesive profiles with holders: A1 horizontal in the glazing bead, A2 vertical in the glazing bead, A3 vertical on the frame, A4 and B1 horizontal on the frame. Choose the length to match the width or height of your blind.

A bracket has broken, the tilt wand is missing or the chain is too short? Here you will find the most important accessories and spare parts for Omnisol indoor venetian blinds: ceiling and universal brackets for the 25 × 25 mm head rail, clamp holders for PVC windows, tension bases and tension brackets, cord winders, magnetic holders for the bottom rail, tilt mechanism, cord lock, and tilt wands and chains in seven lengths. Omnisol only supplies these parts in fixed quantities, so we sell them in packs – the number of pieces is shown for each item. If you are unsure which part fits your blind, send us a photo or call us: +49 9732 3023858.

Warmth on the terrace as soon as you switch on – no preheating. Reflexa's S1 and S3 heaters use the Solastar-G infrared tube, which reduces light emission by up to 99 %. The heater tilts up to 45° (one direction). The S1 with 1400 or 2000 watts comes with a bracket for wall or ceiling, quick clamp and a 50 cm cable with Schuko plug and Hirschmann coupling. With the support tube holder it mounts directly on a support-tube awning (not possible on Suntigua with crossed arms). The S3 with 2500 watts comes with a T-bracket for wall or ceiling and a 50 cm cable; it cannot be mounted on the awning. Connecting cables from 2.5 to 10 m reach sockets further away. To control the heater by radio you need the io dimmer module (3 levels: 33 / 66 / 100 %, up to 3000 W) and a Somfy io transmitter. Heaters, holders and dimmer module are available in RAL 9010, RAL 9006 and DB 703.

Replacement crank for Reflexa Plisseo pleated blinds with crank operation. Choose the length so that you can reach the crank comfortably – from 400 mm for windows at hand height up to 3000 mm for roof windows and high glazing. Colour grey.

The solar tubular motor makes an existing roller shutter electric – with no power cable and no electrician. The solar panel charges the battery and the motor sits in the shutter shaft. You receive a complete Reflexa set: motor, solar panel, battery, adapter, drive and motor bracket. Elero RolAir/RolSolar 868 or Somfy RS100 Solar io, 3 to 20 Nm For octagonal shafts SW 50 and SW 60 Optional matching hand transmitter Which motor fits depends on the weight of the curtain – the pulling force is shown for each motor. The solar panel needs a clear view of the sky.

Your old roller shutter motor has stopped working, or you finally want to get rid of the strap? Here you will find tubular motors by Elero, Somfy and Simu from the Reflexa range – as a wired motor for a switch, as a radio motor or with an emergency crank in case of a power cut. Which motor fits depends on the weight of your shutter. Each motor shows its torque and pulling force for shutters up to 1.5 m and up to 2.5 m high, plus the total length of the motor. Adapter and drive for your shaft (octagonal SW 50 or SW 60) and the motor bracket are included in the set. Radio motors need a matching transmitter, which is not included: Elero 868 MHz motors an Elero transmitter, Somfy io and Somfy RTS motors a transmitter with the same radio technology. Connection to 230 V must be done by an electrician. Give us the size and curtain of your shutter below – we check the motor before ordering.

For Somfy motors with io radio. io is Somfy's newer radio technology; RTS transmitters do not work with it and vice versa. The exception is the Situo 5 Bi-radio: it speaks both protocols and suits homes with a mix of RTS and io motors. The Situo 1 io controls one channel, the Situo 5 io five. The Variation models add a thumb wheel for fine tilting. As a fixed switch there is the Smoove io wall transmitter with battery, frame and mounting plate. Erfal states a radio range of 15 m for io transmitters. Not sure which radio technology your motor uses? Check your order or call us: +49 9732 3023858.

Does your roller blind, pleated blind or venetian blind run on a Somfy radio motor with RTS? Then you need a transmitter with the same radio technology. Here you will find the Somfy transmitters Erfal offers for its RTS motors. The Situo 1 controls one motor or one group, the Situo 5 up to five separately. The Variation models have a thumb wheel for fine tilting, for example of venetian blind slats. Soliris models also switch the sun automation on and off. The Telis 6 Chronis runs up to six channels on a timer, with up to six commands a day. The Telis 16 operates sixteen channels manually. If you prefer a fixed switch on the wall, choose the Smoove wall transmitter – battery powered, no cables. All transmitters use 433.42 MHz and are made for dry living spaces. Whether your motor uses RTS or io is stated in your order or on the motor. If in doubt, call us: +49 9732 3023858.

A sun sensor moves your sun protection when the sun comes out – even when nobody is home. The Sunis Outdoor WireFree RTS runs on solar power and is for RTS motors. The Sunis WireFree II io is the light sensor for io motors. The TaHoma Switch connects your Somfy motors to the internet. It understands RTS, io, Zigbee 3.0 and EnOcean; a plug-in power supply is included. This lets you control roller blinds, pleated blinds and venetian blinds while you are away.

For wired motors: the Smoove Uno is a wall switch for one 230 V motor, the Smoove Duo for two. Both come with a frame for a flush-mounted box, switching current up to 6 A, 80 × 80 mm. Connection to 230 V must be done by an electrician. For 24 V motors there are two regulated 1 A power supplies: the plug-in power supply (50 × 76 × 35 mm, up to 10 m cable) and the slim HT power supply with plug and 100 cm lead.

Fitting your window film yourself? This set contains the tools from the Bruxsafol range that you need – from cleaning the pane and spraying to pressing down and trimming the film. Included: Pressure spray bottle 1.5 l, blue, Applikator 2.0 mounting concentrate, 500 ml, Teflon squeegee soft, blue, Olfa cutter SVR-1 with spare blade, Spare blades for the Olfa cutter, Click scraper 4 cm with blade, Fitting cloth green, approx. 40 × 40 cm, Bruxsafol tape measure 5 m. The set suits all Bruxsafol window films in our shop. We are happy to answer questions about fitting: +49 9732 3023858.