Two-leaf pleated insect screen
For wide patio and balcony doors there is the two-part Reflexa Flylock pleated insect screen door; it can also be divided asymmetrically. When opened, the grey or black mesh folds up to around 2 % of its width per leaf and is barely noticeable. It is rot-proof, flame-retardant and unaffected by light knocks.
There are four versions and two bottom rails, with frame and rails in any RAL colour at no extra cost. As a double door it is available on request up to 490 cm wide.
- Made to the millimetre
- Free shipping within Germany (except islands)
- Instant price in the configurator
4,83★★★★★282 reviews
Subcategories
Our models
Easily configure double pleated insect screen doors from Reflexa® Flylock, two-panel and made to measure, and buy them in our shop. No delivery charges within Germany. Key features: - thanks to the specially pleated grey or black mesh, the pleated insect screen folds back to almost 2% of its actual width when opened (per panel) and is therefore barely noticeable - sturdy, rot-resistant mesh, insensitive to light knocks, flame-retardant - easy installation, asymmetrical division also possible - 4 versions and 2 bottom rails make this product very versatile to install - any RAL colour (frame and rails) is available at no extra charge. A very high-quality, dimensionally stable pleated insect screen door from Reflexa. Below are the different pleated screen types and bottom rails, PL 1 D or PL 1 U and PL 2 D or PL D U; for the selection see configurator. The measuring explanation is intended for recess fitting. If fitting directly onto the frame or onto an open surface, adapt the measurements to the unit dimensions. All order sizes are finished sizes / outer-edge dimensions of the finished pleated screen door. Order width = clear width plus 60 mm Order height = clear height minus 2 mm The pleated screen can be divided symmetrically or asymmetrically, see configurator. The handle rails are 45 mm wide per panel. This shows a simulation of fitting on the frame, i.e. in front of the recess.
Sizes and split
- All order sizes are finished sizes, i.e. the outer edges of the finished pleated door.
- For installation in a recess: order width = clear width plus 60 mm, order height = clear height minus 2 mm. When mounting directly on the frame, adapt the sizes to the element dimensions.
- The pleat can be split symmetrically or asymmetrically. The grip rails are 45 mm wide per leaf.
You choose type and bottom rail in the configurator of the two-panel pleated insect screen.
Other insect screen doors
- Hinged frame and hinged door – open like a window sash or a door
- Swing door – swings both ways and closes by itself
- Reflexa pleated door – only 21 mm deep, single-panel up to 250 cm wide
- Neher PL2 pleated door – up to 300 × 300 cm in one piece
- Sliding door and sliding system – for sliding and lift-and-slide doors, up to 520 cm wide