Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Go to homepage
Send a message
€0.00

Made-to-measure sun protection

Pleated blind VS1 or VS2, tensioned made to measure

Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
  • 389 fabrics and colours to choose from
  • Width up to 170 cm, height up to 280 cm
from €61.93
incl. VAT · free shipping within Germany (except islands)
Delivery time 2 weeks
Configure now Advice +49 9732 3023858
Free shipping within Germany (except islands)
Payment by prepayment (bank transfer)
24 months statutory warranty
Expert advice Mon–Fri · +49 9732 3023858

Configurator

Pleated blind VS1 or VS2, tensioned in 3 steps

Choose step by step. The price updates with every change, and you can change completed steps at any time.

cm
Info and measuring guide

The following mounting types are available

Measure the height of the glazing bead without deduction

- measure the smallest width of the glazing bead, minus 2 mm (smallest width = in front of the window seal = pure inner-edge window material dimension)

- VS 1 and VS 2 are only suitable for vertical mounting (not overhead).

This measuring method corresponds to clip mounting = screw the tensioning shoe into the glazing bead

Width

Alternative measuring:

measure the glass size plus an overlap of approx. 1 cm on the right and left in the width.

Measure from the top edge of the sash to the bottom edge of the sash = order height.

This measuring method corresponds to angle bracket mounting on the window frame.

Width

Alternative measuring:

measure the glass size plus an overlap of approx. 1 cm on the right and left

in the width. Measure from the top edge of the sash to the bottom edge of the sash for the order height. The pleated blind is mounted on the sash using clamp brackets.

This measuring method therefore corresponds to clamp bracket mounting without drilling.

Width
cm
Info and measuring guide

Measuring instructions: (all standard fabrics with 20 mm pleat depth)

Measure the height of the glazing bead without deduction

- measure the smallest width of the glazing bead, minus 2 mm (smallest width = in front of the seal, ignore the seal)

- VS 1 and VS 2 are only suitable for vertical installation (not overhead). This type of measuring corresponds to clip installation in the glazing bead.

Alternative measuring:

measure the glass dimension plus an overlap of approx. 1 cm on the right and left in the width. Measure from the top edge of the sash to the bottom edge of the sash.

This type of measuring corresponds to bracket installation on the window frame.

Alternative measuring: measure the glass dimension plus an overlap of approx. 1 cm on the right and left in the width. Measure from the top edge of the sash to the bottom edge of the sash for the order height. The pleated blind is mounted on the sash using clamp brackets. This type of measuring therefore corresponds to clamp bracket installation without drilling.

For type F1 free-hanging, the measurement is the area to be covered. Please note that only the top rails are installed and the pleated blind is operated by a cord. The entire blind therefore hangs freely.

How to measure

Measuring guide: see the fitting methods below (all fabrics with 20 mm pleat depth; for glazing rebate fitting = minimum rebate depth 17 mm)

Measure the height of the glazing rebate without deduction = order height
- measure the smallest width of the glazing rebate from inner edge to inner edge, minus 2 mm (smallest width = in front of the seal = material dimension of the glazing rebate at its narrowest point; ignore the rubber seal). VS 1 and VS 2 are only suitable for vertical fitting (not overhead). This measuring method corresponds to screwing the clips into the glazing rebate.

alternative measurement:


measure the glass size plus approx. 1 cm overlap on the right and left for the width.
Measure from the top edge to the bottom edge of the sash = order height.
This measuring method corresponds to angle bracket fitting on the window frame.


alternative measurement:

measure the glass size plus approx. 1 cm overlap on the right and left for the width. Measure from the top edge to the bottom edge of the sash for the order height. The pleated blind is fitted to the sash using clamp brackets. This measuring method corresponds to clamp bracket fitting, no drilling.

alternative measurement:


measure the glass size plus approx. 1 cm overlap on the right and left for the width. Measure from the inner edge of the glazing bead at the top to the bottom edge of the glazing bead for the order height. The pleated blind is screwed to the sash using glazing bead angle brackets. This measuring method corresponds to glazing bead angle bracket fitting.

Phone: +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Fabric number
Showing 24 of 389 colours · All 389 colours ·
Info and measuring guide

To view and select fabrics, please click on the desired fabric group.

Please note that, depending on the group, you can only select certain fabrics.

Fitting type
Info and measuring guide
Fitting type

Ceiling holder (upper holder for VS 1, lower is clips)

Fitting type

Wall bracket

Fitting type

Clamp bracket

Fitting type

Clips (top and bottom for VS2)

Fitting type

Glazing bead bracket

Fitting type

Or clamp bracket SLIM, installation of the pleated blind within the glazing bead. Measuring as for glazing bead installation (order width = glazing bead minus 2 mm, order height = glazing bead height without deduction)

Fitting type

Adhesive plate for VS 2

Rail colour

The colour dots show an approximate shade – screen colours may differ from the original.

Info and measuring guide
Rail colour Rail colour

bronze

black-brown

Rail colour Rail colour

silver

white

Pleated blind type
Info and measuring guide

Please choose between VS 1 and VS 2, see sketches.

Pleated blind type

VS 1 operable from one side

Pleated blind type

VS 2 operable from both sides

Please complete all steps first.

Product description

Decorative Cosiflor pleated blinds with a wide choice of fabrics, made to measure – order in our shop. Buy this high-quality pleated blind system and configure it in the shop.

Delivery to Germany, the EU and Switzerland: Cosiflor pleated blinds are versatile and can be fitted in almost any situation. We distinguish between fitting in the glazing rebate (directly in front of the pane), fitting on the window or door frame (for windows with glazing bars or doors) or, where drilling is not allowed, fitting with clamp brackets on the window or door sash. The different measuring options are described below. These pleated blinds are only suitable for vertical windows. (not for roof windows or overhead windows)

Please note that we do not offer the new glazing bead clips that competitors advertise with the slogan "fitting in the glazing bead without drilling". In our opinion this system is not fully developed and can damage the insulation of the window or door and, in rare cases, even cause the glass to break. With conventional glazing bead fitting, which we can recommend, the tension shoes (clips VS 1 / VS 2) are screwed into the glazing bead as shown in the picture. Installation instructions are available as a PDF at the end of this page.

These brackets can be selected: ceiling bracket, wall angle bracket, clamp bracket, clips for VS 1 + VS 2, also available with adhesive plates


All accessories are included. To stop them swinging, these pleated blinds are tensioned at the sides with nylon cord. They are operated by handles in the middle, which allow the blind to be adjusted to any position.

As standard, this version is operated from top to bottom = VS 1.


At no extra cost, you can also choose operation from both sides = VS 2.

All aluminium rails are available in silver grey, white, bronze, black-brown and anthracite. The matching PVC parts for the pleated blind are available in grey, white and black-brown.



Technology & fitting

Key data from the configurator

Sizes
Width up to 170 cm · height up to 280 cm
Fabrics
389 fabrics and colours to choose from
Delivery time
2 weeks

Instructions & downloads

Advice

Personal expert advice

Not sure about size, fabric or fitting? Call us or let us check your configuration before production.

+49 9732 3023858

Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Have my configuration checked

What customers say

4,83
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert

Overall rating of our shop on ProvenExpert. As of 18.10.2026

All reviews on ProvenExpert

Reviews of this product

Pleated blind VS1 or VS2, tensioned
This website uses cookies to ensure the best experience possible. More information...