Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Go to homepage
Send a message
€0.00

Made-to-measure sun protection

Roller Door PREMIUM RD75 XXL up to 620 cm Wide made to measure

Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
  • Width up to 620 cm, height up to 538 cm
from €1,830.68
incl. VAT · free shipping within Germany (except islands)
Delivery time 2 weeks
Configure now Advice +49 9732 3023858
Free shipping within Germany (except islands)
Payment by prepayment (bank transfer)
24 months statutory warranty
Expert advice Mon–Fri · +49 9732 3023858

Configurator

Roller Door PREMIUM RD75 XXL up to 620 cm Wide in 3 steps

Choose step by step. The price updates with every change, and you can change completed steps at any time.

cm
cm
Info and measuring guide

- max. door width up to 370 cm at max. 538 cm overall height (roll diameter = approx. 39 cm)

- max. door width 395 cm at max. 512 cm overall height (roll diameter = approx. 37.5 cm)

- max. door width 420 cm at max. 487 cm overall height (roll diameter = approx. 37.3 cm)

- max. door width 445 cm at max. 462 cm overall height (roll diameter = approx. 37.1 cm)

- max. door width 470 cm at max. 437 cm overall height (roll diameter = approx. 37 cm)

- max. door width 495 cm at max. 411 cm overall height (roll diameter = approx. 36 cm)

- max. door width 520 cm at max. 386 cm overall height (roll diameter = approx. 35.5 cm)

- max. door width 545 cm at max. 355 cm overall height (roll diameter = approx. 34 cm)

- max. door width 570 cm at max. 335 cm overall height (roll diameter = approx. 35 cm)

- max. door width 595 cm at max. 309 cm overall height (roll diameter = approx. 34 cm)

- max. door width 620 cm at max. 309 cm overall height (roll diameter = approx. 34 cm)

Guide rail dimensions: 10 cm wide x 3.7 cm thick.

The order dimensions are the outer edge dimensions of the entire door construction.

How to measure

Measuring guide for variant 1: Fitting directly in the reveal opening. The coil faces inwards. The curved side of the curtain faces outwards. Please measure the clear width at the top, bottom and middle. Deduct 0.5 - 1 cm from the smallest measurement. This is the finished width (order width).

The finished height is the clear height from the top of the reveal (where the coil ends) to the floor minus 0.5 - 1 cm (order height).


Variant 2: Fitting behind the reveal opening (if there is room). The coil faces inwards, see original picture. The curved side of the curtain faces outwards. Measure as follows: add 20 cm to the width of the reveal opening (2 x rail width of 100 mm per side).

Order height = top of coil to bottom edge of bottom rail. The advantage of this type of fitting is that the clearance height does not change (if there is room above the reveal opening).


Variant 3: Fitting in front of the reveal opening (as variant 2, but the coil faces outwards and the curved side of the curtain faces inwards): please state "Type 3" when ordering.

Phone: +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Measurement basis
Motor type
Info and measuring guide

We supply drives and controls from the German manufacturer BECKER® or RADEMACHER® (depending on stock availability) and, for oversizes, SIRAL®. Drive side always as seen from inside.

Motor type Motor type Motor type Motor type
Shutter curtain colour

The colour dots show an approximate shade – screen colours may differ from the original.

Info and measuring guide

You can order curtains in the following colours:

Shutter curtain colour
flat cut-out special slat for ventilation
Vision slats
Special slat with plastic viewing window.
Fitting type
Info and measuring guide

Measuring instructions for type 1: Please measure the clear width at the top, bottom and in the middle.

Deduct 0.5 cm from the smallest dimension. This is the finished width.

The finished height is the clear height from the top edge of the reveal (where the box will ultimately be) to the floor.

Variant 1: Installation directly in the reveal opening, measuring as described above.

FS rails always pre-drilled through the guide.

Fitting type

Variant 2: Installation behind the reveal opening (if there is space). Measure as follows: please add 20 cm (2 x rail dimension) to the width of the reveal opening.

Order height = top edge of box to bottom edge of guide rail. The advantage of this type of installation is that the clearance height does not change (if there is space above the reveal opening).

FS rails always pre-drilled from the front.

Fitting type

Variant 3: Installation in front of the reveal opening (as variant 2, only the box faces outwards): please specify "Type 3" when ordering.

FS rails always pre-drilled from the front.

OSE bottom rail
Info and measuring guide

- In accordance with current EU regulations, roller doors operated by radio remote control must be fitted with a so-called OSE bottom strip with electronics (optical sensor bottom rail).

This regulation applies to doors in public places as well as to doors on commercial premises etc.

However, an OSE bottom rail with electronics only makes sense with radio remote control. In all other cases, such as switches or key switches, it is the responsibility of the person operating the switch to move the door.

The old rule under which so-called DW bottom rails (pressure wave rails) were also permitted is no longer valid.

These considerably cheaper bottom rails are often still offered by competitors.

- As a retrofit safety extra for roller doors without OSE electronics, we recommend installing a light barrier on radio-operated doors. It serves a similar purpose: if the roller door is lowered by radio without supervision and there are obstacles, animals or children underneath, the roller door stops and does not continue to unroll.

The difference from the OSE bottom strip with electronics is that in an emergency the door does not automatically reverse (as is the case with OSE electronics), but merely stops.

What private individuals ultimately install on their own property is up to each of them.

A 4 cm high OSE rubber seal with rain drainage profile is standard.

Optionally with OSE electronics according to DIN, in conjunction with a radio control.

OSE bottom rail
Emergency crank gear
Info and measuring guide

In the event of a power cut, the door can still be operated by crank. An additional gear is fitted to the motor.

Crank operation can be chosen freely. Possible from outside or inside. We manufacture according to your wishes.

Rail colour

The colour dots show an approximate shade – screen colours may differ from the original.

Extras
Info and measuring guide

- required if you want to install a door without safety extras such as a light barrier or OSE edge, but with 2 switches (push button inside, e.g. key switch outside)

This isolating relay is a flush-mounted version and only needs to be connected in between if the switches are wired for SELF-HOLDING (switch function latches permanently), in order to avoid short circuits. You can avoid this type of connection by installing the switches not with self-holding but only with a push-button/dead-man function.

Our switches are supplied with a push-button/dead-man function and can be switched over.

Explanation of dead-man control:

The operator keeps the switch pressed until the door has been raised or lowered.

Explanation of the self-holding function:

The operator presses the switch once and the motor runs through to the respective end position.

In conjunction with a BECKOTRONIC 5 radio roller door control and an additional switch, no separate isolating relay is needed, because the control itself takes care of this. An additional switch connection is provided on the control.

If you select "wired code keypad", NO isolating relay is required when connecting an additional switch.

Info and measuring guide

If you would like a code keypad for outside, this is only possible by means of a radio control.

In this case you will receive a radio-operated code keypad on which you can set any number combination. The advantage of this combination is that you do not necessarily need a "misplaced" hand-held transmitter to open the door system. Any user who enters the preset number combination can open the door from outside.

As the commands are transmitted from the code keypad to the control exclusively by radio, there is also no need for complex wiring.

There is also a manual switch on the control itself. An additional switch for inside is therefore not necessary.

When using a normal switch and a key switch, please note when connecting that a multi-point isolating relay must be connected in between. If no relay is used, there is a risk of damage to the roller door motor. Your authorised electrician should advise you on this. For an explanation and ordering option, see the selection field EXTRAS.

AP = surface-mounted

UP = flush-mounted

Call-back service
Inspection log book
Please complete all steps first.

Product description

The high-quality RD75 XXL roller door without box is even more versatile and can also be made in oversizes. This door, too, is built to high quality standards. Available to buy online. Can be made 560 cm wide x 320 cm high and larger.

This system allows the largest possible sizes. As there is no box, we recommend fitting it behind the reveal from the inside. Otherwise, a protective box should be planned in during construction.

German PREMIUM specification in many colours.

New since 2018: maximum sizes and coil diameters in cm:

- max. door width up to 370 cm at max. 538 cm overall height (coil = approx. 39 cm)

- max. door width 395 cm at max. 512 cm overall height (coil = approx. 37.5 cm)

- max. door width 420 cm at max. 487 cm overall height (coil = approx. 37.3 cm)

- max. door width 445 cm at max. 462 cm overall height (coil = approx. 37.1 cm)

- max. door width 470 cm at max. 437 cm overall height (coil = approx. 37 cm)

- max. door width 495 cm at max. 411 cm overall height (coil = approx. 36 cm)

- max. door width 520 cm at max. 386 cm overall height (coil = approx. 35.5 cm)

- max. door width 545 cm at max. 355 cm overall height (coil = approx. 34 cm)

- max. door width 570 cm at max. 335 cm overall height (coil = approx. 35 cm)

- max. door width 595 cm at max. 309 cm overall height (coil = approx. 34 cm)

- max. door width 620 cm at max. 309 cm overall height (coil = approx. 34 cm)

RD H75 door, open installation without box, up to 620 cm wide (at 620 cm width = wind class 2, up to 480 cm width = wind class 4)

From approx. 17 m² = version with special 150 Nm motor. From this area upwards, doors are manufactured and supplied without wind load certification. Roll-on system from a height of 411 cm included at no extra cost

- new entry guides and curtain end locks in the rails (rail dimensions = 37 mm deep x 100 mm wide)

- storm protection thanks to interlocking curtain

- hail-tested

(the curtain cannot be pushed out thanks to the S-lock, see the red circle in the picture)


- even better noise insulation thanks to additional insulation in the box

- all boxes with extra-strong steel end caps (not die-cast aluminium) (the picture of the door shows fitting variant 2 = behind the opening, box facing inwards. The rear box cover and guide rails are not visible from the outside; the curved side of the curtain faces outwards)

As standard, these doors are fitted with a robust, integrated mechanical 230V BECKER® / RADEMACHER® tubular motor (depending on stock availability) including a fall arrest device, and can optionally be operated by BECK-O-TRONIC® radio control or by switch only. Other circuits, such as yard lighting, can also be connected to the BECK-O-TRONIC®.


All PREMIUM doors come with a sturdy aluminium bottom rail with a strong rubber seal. On roller doors, a fall arrest device is not an option but a requirement.

The rubber seal at the bottom is approx. 4 cm high and has a rain drainage profile. To stop the seal from being completely crushed when closing and breaking after a while, as happens with inferior products, we fit special stop blocks at the bottom of the side guide rails that prevent the rubber from being squashed and damaged. Fixing screws into the building structure are not included.

The foam-filled aluminium curtain (face = 75 mm high x 20 mm thick to DIN, 5.7 kilograms per m²) is fitted in / behind / in front of the reveal opening just like a conventional roller shutter. Special slats, such as vision and ventilation profiles, are available. (see configurator)

Original fitting instructions from the system supplier HEROAL® (click here)

The guide rails with keder guidance measure 37 mm deep and 100 mm wide and allow the curtain to run almost silently.

Roller door order sizes: drive side always viewed from inside.

Top edge of bracket to bottom edge of bottom rail = order height

Outer edge of rail to outer edge of rail = order width

Steel springs suspend the curtain inside the box on a sturdy 70/125 mm steel shaft; they differ from conventional roller shutter shafts in their greater stability and durability. As standard, the bottom rail has a strong rubber seal that compensates for uneven floors. The optional radio control plugs into an existing socket and is self-learning. It really could not be simpler.

Our view: High-quality German Heroal® branded product and a cost-effective option for large professional doors for self-installation* Widest range of sizes, up to 620* cm wide and up to 538* cm high.(*max. area 17 m² = certified)

*Please note: these roller doors are delivered disassembled. For weight reasons, the curtain is not pre-fitted in the box and must be installed on site. They are therefore only suitable for tradespeople with sufficient technical understanding. The box is placed on the rails and fixed. The pre-locked curtain is then simply slid over the shaft and secured with steel springs. Done.

Aluminium slat = 5.7 kilograms per m²:


Rail colour available in white - grey - brown - silver


11 profile colours to choose from at no extra cost:


Fitting variants: These roller doors can be fitted in different ways.

Summary of winding direction:

- if the coil faces outwards (left-hand roll), the curved side of the curtain always faces inwards

- if the coil faces inwards (right-hand roll), the curved side of the curtain always faces outwards

All available accessories, such as radio controls, switches, keypads, emergency crank options etc., can be found in the configurator.

Important note on the garage:

- the garage must be closed on all sides once the door is fitted (if the garage is open at the back, the increased wind load can push the curtain backwards out of the guide rails)

We deliver in secure packaging with 2 cm thick timber all round and a viewing window so the goods can be checked on delivery.


Please note:

- up to a size of 450 cm we deliver kerbside

- sizes from 451 cm width are delivered to the address

Delivery to the address means that the customer must help unload the goods from the lorry. From these sizes upwards, the carriers can no longer unload the large packages on their own. At maximum order sizes, the total weight including packaging can be up to 180 kg. We recommend having a total of 3 helpers available at short notice to unload the goods.

***Limitation: These doors are not suitable as high-speed doors or for operation every minute (supermarkets, loading bays etc.). Every tubular motor has a thermal switch and shuts the system down in the event of overload / overheating.



Technology & fitting

Key data from the configurator

Sizes
Width up to 620 cm · height up to 538 cm
Delivery time
2 weeks

Instructions & downloads

Advice

Personal expert advice

Not sure about size, fabric or fitting? Call us or let us check your configuration before production.

+49 9732 3023858

Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Have my configuration checked

What customers say

4,83
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert

Overall rating of our shop on ProvenExpert. As of 18.10.2026

All reviews on ProvenExpert

Reviews of this product

Roller Door PREMIUM RD75 XXL up to 620 cm Wide
This website uses cookies to ensure the best experience possible. More information...