Advice +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm shop@sonnenschutzshop24.eu Free shipping within Germany (except islands/freight) Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
Go to homepage
Send a message
€0.00

Made-to-measure sun protection

RG90 roller grille with fall protection made to measure

Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert
  • Width up to 450 cm, height up to 330 cm
from €1,918.39
incl. VAT · free shipping within Germany (except islands)
Delivery time 3-4 weeks
Configure now Advice +49 9732 3023858
Free shipping within Germany (except islands)
Payment by prepayment (bank transfer)
24 months statutory warranty
Expert advice Mon–Fri · +49 9732 3023858

Configurator

RG90 roller grille with fall protection in 3 steps

Choose step by step. The price updates with every change, and you can change completed steps at any time.

cm
cm
Info and measuring guide

Box sizes:

- box dimension 30 x 30 cm (closed all round)

Roller grille in a box possible up to max. 450 cm width.

Queries: Germany 09732 3023858

-----------------------------------------------------------------

Our finished dimensions are outer edge dimensions.

Depending on the mounting type, the rail widths as well as the box heights and bottom rails must be added.

Example door roller grille RG 90:

Mounting type 1 = in the opening

- Your clear dimensions (garage opening dimensions) are e.g. 380 cm wide by 310 cm high = order dimensions 379 cm wide by 309 cm high

You want to mount in the opening (type 1).

The drive-through dimensions are reduced by the two guide rail widths (2 x 8.5 cm)

This leaves a drive-through width of 360 cm

The drive-through height is reduced by the box height of 30 cm and by the bottom rail of 8 cm, which does not roll into the box.

This leaves a drive-through height of 310 cm

- 30 cm - 8 cm = approx. 272 cm

--------------------------------------------------------------------------------

Mounting type 2 or 3 = behind or in front of the opening

It is therefore advisable to mount behind the reveal opening (type 2) or in front of it (type 3),

in order to retain the drive-through dimensions of the garage opening.

The measuring for type 1 or type 3 is the same.

Add the box dimension of 30 cm + 8 cm bottom rail to your clear opening height.

The order height would therefore be 310 cm

+ 30 cm + 8 cm = 348 cm

To your clear drive-through width of 380 cm, please add:

2 x rail dimension = 17 cm. The order width would therefore be 397 cm.

How to measure

Measuring guide for option 1: fitting directly in the reveal opening. The curved side of the grille faces outwards. The box faces inwards. Please measure the clear width at the top, bottom and middle. Deduct 0.5–1 cm from the smallest measurement. This is the finished width (order width).

The finished height is the clear height from the top edge of the reveal (where the box will be) to the floor, minus 0.5–1 cm (order height).


Option 2: fitting behind the reveal opening (if there is space). Measure as follows: add 17 cm (2 x rail width of 85 mm per side) to the width of the reveal opening.

Order height = top edge of box to bottom edge of bottom rail. Box dimensions = 30 x 30 cm. The advantage of this type of fitting is that the clear passage height is not reduced (if there is space above the reveal opening). The curved side of the grille faces outwards.


Option 3: fitting in front of the reveal opening (as option 2, but the box faces outwards. The curved side of the grille faces inwards). Please state "Type 3" when ordering.

Alternatively, you can simply give the clear dimensions on site; see configurator. The finished sizes are then plus 17 cm for the rail overlaps and plus 30 cm in height for the box.

Phone: +49 9732 3023858 · Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Measurement basis
Motor type
We supply drives and controls from the German manufacturer BECKER® or RADEMACHER® (depending on availability). Drive side always as seen from inside.
Grille arrangement
Info and measuring guide
Grille arrangement

straight

Grille arrangement

centrally offset

Grille arrangement

Straight

Grille arrangement

Offset to the centre

Box colour

The colour dots show an approximate shade – screen colours may differ from the original.

Shutter curtain colour

The colour dots show an approximate shade – screen colours may differ from the original.

Fitting type
Info and measuring guide

Box sizes:

- Box dimension 30 x 30 cm (closed all round)

Order height = from top edge of box to bottom edge of bottom rail

Order width = outer edge of guide rail to outer edge of guide rail.

Roller grille in box possible up to max. 460 cm width.

Queries: Germany 09732 3023858

-----------------------------------------------------------------

Our finished dimensions are outer edge dimensions.

Depending on the type of installation, the rail widths as well as box heights and bottom rails must be added.

Example door roller grille RG 90:

Installation type 1 = in the opening

- Your clear dimensions (garage opening dimensions) are e.g. 380 cm wide by 310 cm high = order dimensions 379.5 cm wide by 309.5 cm high

You want to install in the opening (type 1).

The passage dimensions are reduced by the two guide rail widths (2 x 8.5 cm)

This leaves a passage width of 360 cm

The passage height is reduced by the box height of 30 cm and the bottom rail of 8 cm, which does not roll into the box.

This leaves a passage height of 310 cm

- 30 cm - 8 cm = approx. 272 cm

--------------------------------------------------------------------------------

Installation type 2 or 3 = behind or in front of the opening

It is therefore advisable to install behind the reveal opening (type 2) or in front of it (type 3)

in order to retain the passage dimensions of the garage opening.

The measuring for type 1 or type 3 is the same.

Add the box dimension of 30 cm + 8 cm bottom rail to your clear opening height.

The order height would therefore be 310 cm

+ 30 cm + 8 cm = 348 cm

To your clear passage width of 380 cm, please add:

2 x rail dimension = 17 cm. The order width would therefore be 397 cm.

OSE bottom rail
Info and measuring guide

This equipment complies with DIN.

- RST roller door control with dead-man operation (with connection option for an additional key switch and fall-arrest device)

Emergency crank gear
Info and measuring guide

In the event of a power failure, the grille door can still be operated by crank. An extra gear is fitted on the shaft.

With installation type 3, in front of the opening, the crank entry on the box is closed with a rubber plug so that the door cannot be opened by unauthorised persons. In an emergency, the rubber plug must then be removed and the crank can be inserted from outside so that the door can be operated manually.

Crank operation can be chosen freely, from outside or from inside. We manufacture to your requirements.

Emergency crank gear

Please note: image for illustration purposes only. Variations possible.

Extras
Info and measuring guide

This isolating relay is a flush-mounted version and only needs to be connected in between if the switches are set to SELF-HOLDING (switch function latches permanently), in order to avoid short circuits. You can avoid this type of connection by installing the switches not with self-holding but only with push-button/dead-man function.

Our switches are supplied with push-button/dead-man function and can be switched over.

Explanation of dead-man operation:

The operator keeps pressing the switch until the door has been raised or lowered.

Explanation of self-holding function:

The operator presses the switch once and the motor runs through to the respective end position.

Info and measuring guide

AP = surface-mounted

UP = flush-mounted

Call-back service
Inspection log book
Please complete all steps first.

Product description

Configure this high-quality, certified and tested HEROAL® RG 90 roller grille here at Sonnenschutzshop24 and order it.

Our RG 90 roller grille is made from an extruded aluminium grille by the system supplier HEROAL®. Max. width = 460 cm x max. height = 360 cm (outer dimensions of the box system). You can put this roller grille together in our shop configurator and receive a price immediately. All extras in the price list can be ordered. Roller grilles make access to windows and doors more difficult and are increasingly used by private households to secure their homes.


The standard specification complies with the latest certifications, as follows:

- HEROAL® grille profile, 90 x 14 mm, 8 kg per m², ready to fit

- integrated BECKER® / RADEMACHER® 230V tubular motor (subject to stock availability)

- choice of surface-mounted or flush-mounted switch with dead-man function

- fall protection

- H-STF guide rail, 85 mm wide x 28 mm deep (noise-dampened)

- box size 30 x 30 cm, roll-formed with lead-in rollers, 125 cm steel shaft

- extruded aluminium bottom rail with 4 cm OSE rubber seal

- supplied with straight grille pattern as shown

- fixing screws for the building structure are not included

Available colours:

- box and rail colour in white, grey, silver, dark brown, light beige, cream white - grille colours in white, grey, silver, dark brown

Our roller grilles use Heroal® profiles. The PREMIUM RG 90 is supplied as standard exclusively with BECKER® or RADEMACHER® motors.

Fitting options: These roller grilles can be fitted in several ways.

Summary of winding direction:

- if the box faces outwards (left roller), the curved side of the grille always faces inwards

- if the box faces inwards (right roller), the curved side of the grille always faces outwards

All available accessories, such as switches, keypads, emergency crank option etc., can be found in the configuration.

We deliver in secure packaging with 2 cm thick timber all round and a viewing window so that you can inspect the goods on delivery.


Put together your RG 90 roller grille in our shop and order it with our configurator. Suitable for commercial and private use.



Technology & fitting

Key data from the configurator

Sizes
Width up to 450 cm · height up to 330 cm
Delivery time
3-4 weeks

Instructions & downloads

Advice

Personal expert advice

Not sure about size, fabric or fitting? Call us or let us check your configuration before production.

+49 9732 3023858

Mon–Thu 9 am–4 pm, Fri 9 am–2 pm

Have my configuration checked

What customers say

4,83
Shop rating: 4,83 out of 5 · 282 reviews on ProvenExpert

Overall rating of our shop on ProvenExpert. As of 18.10.2026

All reviews on ProvenExpert

Reviews of this product

RG90 roller grille with fall protection
This website uses cookies to ensure the best experience possible. More information...